Flat-Backed Angled Wall Hook
Created today
Description
A 3D-printable wall hook featuring a straight outer spine for a clean visual line against the wall, paired with a curved inner profile that creates a natural resting notch.
- Straight spine: Sits perfectly parallel to the mounting plate.
- Inward curve: Adds depth to the hook's catch without thinning the whole shaft.
- Base plate: 30x30 mm, sized for standard mounting tape.
Images
More like this
Explore more in Home & Fixtures →
Scandi Flared Coat Hook
What it's for A minimalist, Scandinavian-inspired wall hook for coats, bags, or towels. The flared cap prevents items from slipping off while maintaining a soft, continuous profile. It mounts using a single countersunk screw through the center, with a deep counterbore that allows the screw head to sit well below the surface—ready to be left exposed or covered with a standard 9.5mm wooden plug. Dimensions Length: 63 mm from the wall. Diameters: 22 mm at the wall base, tapering to 16 mm at the neck, and flaring to a 38 mm cap. Hardware: 5 mm through-hole with a 9.5 mm counterbore (suits a standard #8 or #10 wood screw). Print notes The flare angle is kept under 45 degrees, meaning this prints cleanly standing straight up on its base without any supports. If you want a smoother finish on the front face, you can flip it 180 degrees in your slicer and print it face-down (the chamfers and rounding will print perfectly either way).
Vileda Broom Bar Hook
Brooms that crash to the floor the moment a closet door closes are a solvable problem. This replacement end cap drops directly over a standard Vileda metal handle, replacing the stock hang loop with a massive, open hook that funnels right onto a closet bar without binding. The top arch features a flattened plateau. Flip the model onto this face in your slicer, and the entire assembly prints cleanly upside down without supports. Fitment Details Handle sleeve: 25.7 mm bore drops straight over the bare metal stick, seating the internal mushroom anchor. Hook clearance: U-channel accommodates hanging rods up to 27.5 mm. Print specs: Support-free when oriented on the flat top face; use PETG for impact resistance.
Straight Cylindrical Pipe
A straight cylindrical pipe with a uniform wall thickness, designed for fluid transfer, structure, or sleeving. Inner Diameter: 60 mm Outer Diameter: 64 mm Wall Thickness: 2 mm Overall Length: 60 mm
64mm Hose Holder Clamp
What it's for A heavy-duty saddle clamp designed to securely mount a 64 mm outer-diameter hose. The clamping mechanism uses an M6 bolt and a captive nut on the right ear to tighten the split ring. Dimensions Bore: 64 mm unobstructed passage. Base: 74 mm wide by 70 mm long, 6 mm thick. Mounting holes: Four 6.5 mm clearance holes at the corners. Clamp width: 25 mm thick on the Z-axis. Print notes Print this flat on its base. The hex recess is sized for a standard M6 nut and should bridge without supports on well-tuned printers, but a tiny dab of support inside the hex pocket won't hurt.
Smart Duplex Sconce Plate
An oversized, deep-shell wall plate for a standard US duplex outlet, built to house a Raspberry Pi Zero W and up-and-down sconce lighting. Pi Zero Mount: Integrated standoffs (58x23mm spacing) for M2.5 screws, tucked beside the receptacle. Lighting Control: 5.5mm face cutout for an ambient light sensor. LED Bays: Top and bottom mounting blocks with flush cutouts for dual-directional LED strips. Clearance: 14mm overall depth clears standard hardware while providing internal routing space.
30mm Fluted Drawer Knob
A mushroom-style drawer knob with a straight-fluted grip ring. Designed for environments where hands may be wet, the flutes provide mechanical grip without the complex recesses of a diamond knurl that trap moisture. The part includes a central clearance hole for standard M4 mounting screws. Specifications Cap Dimensions: 30 mm diameter, 18 mm tall Stem Dimensions: 12 mm diameter, 10 mm length Total Standoff: 28 mm Mounting: M4 clearance through-hole (4.5 mm diameter) Grip Feature: 30 vertical flutes