Gothic Gravestone Villain Trophy
Created today
Description
What it's for
A robust, display-ready Gothic gravestone trophy designed to award the best villain of the night. The piece is styled as a weathered cemetery monument on a heavy plinth, decorated with a prominent central skull, gothic bat silhouettes, and spiderwebs anchoring the upper arch. The text is physically raised from the stone face, providing sharp contrast and high readability.
Dimensions
- Overall size: 90 mm wide, 160 mm tall, 35 mm deep.
- Base: 90 mm × 35 mm, forming a stable 20 mm thick foundation.
- Text and details: Extruded 1 mm past the main surface to ensure crisp layer lines.
Print notes
Designed for dual-color FDM printing. The geometry is fully manifold and structured so that the raised white details (the skull, webs, bats, and text) all align precisely on the forward Z-plane if laid flat.
- Orientation: The model generates standing upright for preview purposes. For FDM, rotate it 90 degrees backwards in your slicer so the text points straight up.
- Color swap: When printed flat on its back, simply schedule a filament change at the layer where the lettering begins to switch from black to white. No MMU or AMS is required.
- Supports: None needed if printed flat on its back.
Images
More like this
Explore more in Decor & Display →
Tea Light Skull
A geometric, stylized skull designed to hold a standard tea light. The model stands roughly 4 inches (100mm) tall and features a hollow inner chamber connected to the eyes and nose, allowing light to cast outwards. Height: ~101mm (4 inches) Base Opening: 42mm diameter (fits standard 38mm tea lights) Printability: Designed with a flat base. Supports are recommended for the eye sockets and inner ceiling depending on your printer's bridging capability. Material Note: White or off-white PLA is recommended to diffuse the light effectively. Ensure you only use battery-operated LED tea lights, as a real flame will melt the PLA.
5mm Bore Heart Ornament
A flat-backed ornamental plate. The critical interface here is the 5 mm through-hole at the top dead centre — check the gauge of your hanging hooks or ribbon before running the file. Overall Dimensions: 70 mm width, 70 mm height, 3.8 mm total thickness. Base Plate: 3.0 mm thick, solid manifold for FDM. Raised Pattern: 0.8 mm extrusion above the base surface. Bore: 5.0 mm diameter. Lays entirely flat on the bed. No supports required.
TCC 3-Card Display Stand
A rigid, vertical display stand engineered specifically to hold three standard trading cards in penny sleeves. The stand features three independent, straight-drop slots and a commanding 170 mm rear backdrop to frame the collection. What it's for Built to display standard Pokémon or similar trading cards while kept safely inside their penny sleeves. The straight vertical drop ensures the cards sit completely upright without leaning, and the independent grooves keep them evenly spaced across the presentation wall. Dimensions Overall size: 236 mm wide × 50 mm deep × 170 mm tall. Slot dimensions: 70 mm wide × 10 mm deep × 2.4 mm thick (generously sized to slide penny sleeves in and out without binding). Spacing: 8 mm solid dividers between each card slot. Print notes Designed to print exactly as oriented without any supports. The rear braces add structural rigidity to the tall back wall without needing a massive block of filament. The front TCC lettering is modeled as a distinct region, allowing it to be printed easily as a flush colour change or an AMS/MMU paint region.
GIVVY — Toploader Display Stand
GIVVY Display Stand brings a bold, architectural frame to your favorite sleeved or toploaded trading cards. The design couples a stable, low-profile sloped base with a prominent vertical backboard, acting as a canvas for the heavy, embossed typography. It's built in a single unyielding piece—ready to anchor a desk or elevate a display case without tipping. Dimensions Overall Footprint: 105mm wide × 46mm deep Height: 65mm total Card Slot: 90mm long, 5.5mm wide, pitched backward at a gentle 5 degrees for the optimal viewing angle. Print Notes Prints entirely without supports on its flat base. The raised lettering extends 3mm outward, easily catching overhead lighting for sharp contrast. Consider swapping filaments right at the 65mm Z-height (or painting the raised text) to make the branding pop.
Glatte Ballhalterung 130 mm
Eine stabile Halterung für Bälle mit 130 mm Durchmesser. Die Auflagefläche ist glatt und halboffen, sodass der Ball sicher sitzt und leicht entnommen werden kann. Passform: 130 mm (13 cm) Durchmesser Auflage: Glatte, U-förmige Schale ohne Stopper Struktur: Runder Standfuß mit massiven, geschwungenen Stützen
Familystan-2
What it's for A custom desktop display featuring three names—Anwar, Shireen, and Aadheen—arranged in a triangle. The names lean inward to meet at the corners, sitting on top of a double base consisting of a triangular connecting frame and a wider circular footing. Dimensions Overall footprint: 70 mm x 70 mm (dictated by the circular base) Height: ~33 mm Base thickness: 4 mm combined (2 mm ring, 2 mm triangle) Print notes No supports required; the text is angled comfortably at 45 degrees. The names and frames are modeled distinctly for easy multi-color painting or layered printing.