Grab Pack Prop Set
Created today
Description
What it's for
A wearable grab pack costume prop designed for a 9-year-old. Includes the main backpack unit with integrated strap loops, plus two separate grabber arms ending in wide, open-palmed four-finger hands.
Dimensions
- Backpack: 250 mm total width across the outer spools, designed to sit flat against the wearer's back.
- Strap loops: 35 mm internal clearance, sized to easily accept standard 1.5-inch webbing.
- Hands: Approximately 120 mm across the splayed fingers, giving a large cartoonish footprint.
Print notes
The backpack body prints as a single solid piece with the spools attached. The launcher arms and hands are separate bodies designed to print completely flat on the bed for maximum strength and zero supports. Paint them up or string actual colored wire between the backpack spools and the arm hubs to complete the rig.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Wide Brim Elliptical Hat
Here's a baseline wide-brimmed hat shell, anchored around the 170x200mm elliptical clearance requested. It is built flat to maximize bed adhesion for large-format printers, treating the build plate as the brim's reference plane. The dome is a simple half-ellipsoid that covers the core geometry, leaving plenty of room for modifications. Remix Hooks Crown Height: Set to a default 100mm. Scale the Z-axis of the crown geometry if you need a taller top hat or a shallower boater profile. Brim Contour: It is completely flat right now to survive the first layer on a 400x400mm bed. You could run a slight Z-warp over the outer 50mm to give it a swoop, though that will require supports. Material: At 2.4mm thick, this is dimensioned for standard rigid filaments (PETG/PLA) to hold its shape. Dialing the thickness down to 1.2mm for TPU would give the brim some authentic flop.
Kids fairy wings
Kids costume
Ultimate Tic-Tac-Toe Set
A complete 150mm Ultimate Tic-Tac-Toe board featuring 9 nested 3x3 grids. The main gameplay zones are separated by thick, raised dividers, while the smaller internal grids use thinner lines to keep the board easily readable during play. An outer rim prevents pieces from sliding off the edge. Board Size: 150 × 150 × 7 mm overall Play Pieces: Includes custom X and O tiles (11mm diameter, 2.5mm thick) sized perfectly for the inner grid cells. Tolerances: The sub-grid cells are 12.5mm wide, leaving a comfortable 1.5mm clearance for the tiles. Printing: All parts are oriented flat for printing without supports. The board, X tile, and O tile are provided as distinct, selectable parts so you can easily assign different colors or duplicate the tiles in your slicer.
Smooth Swept-Wing Flexi Butterfly
A robust print-in-place flexi butterfly with perfectly sweeping, organic wing shapes. I stripped out the old jagged polygon boundaries and replaced them with tangent arcs—giving the wings a true biological sweep while keeping the hinge exactly where it needs to be. The antennae are anchored deep into the head block, so they'll actually survive a drop or two. Remix hooks Wing span: Currently sweeps out to roughly 108mm across. You can pull the outer hull coordinates further out for a longer wingspan. Vein pattern: Driven by basic hulls intersecting the wing body. Easy to swap in your own grid or voronoi generator. Hinge tolerance: Locked at 0.4mm clearance on the barrels and pins, which works beautifully for standard PLA. If your printer over-extrudes, scale the pin down slightly.
Personalized Novelty Plug joke
A geometric novelty shape, commonly used as a gag gift, featuring a flared base and a tapered body. Personalization: Features the name "Eric" embossed boldly on the front face. Construction: Single solid piece, easy to print without supports. Scale: 98 mm overall height.
Classic Stacking Ring Toy
A classic educational stacking ring set designed for early motor skills. The design features thick, fully rounded components to eliminate sharp edges and ensure safe handling. The generous clearances make stacking easy for small hands. What it's for Perfect as a robust, classic nursery toy or a personalized gift for a toddler. It teaches size sorting and hand-eye coordination. Dimensions Overall Height: 130 mm Base Plate: 100 mm diameter Stacking Rings: 85 mm, 70 mm, and 55 mm outer diameters Internal Clearances: 1.5 mm gap between the post and the rings to prevent binding. Print notes Print the rings and base separately on their flat bottom faces. Use a high infill for the base to give the toy a low center of gravity. No supports are required for any of the parts.