iBasso DC04 Ultra DAC Sleeve
Created today
Description
A functional, flat-printing sleeve for the iBasso DC04 Ultra USB DAC. Built to slide on and stay put, it protects the casing while keeping the screen and jacks clear.
- Fit: Designed for the DC04 Ultra (58 × 23.4 × 13.2 mm) with built-in clearance.
- Access: Continuous top window blends the screen opening into the front thumb notch for easy extraction.
- Ports: Oversized 4.4mm and 3.5mm jack cutouts to clear thick audio cable barrels.
- Buttons: Single continuous side slot for unobstructed access to the volume and filter controls.
- Print: Prints flat on its back or front face; no supports required.
Images
More like this
Explore more in Desk & Tech →
iBasso DC04 Ultra Case
A durable, hard-shell slip case designed for the iBasso DC04 Ultra USB DAC. What it's for This sleeve protects the DAC while tossing it into a bag or carrying it on the go. It features a bottom cutout for the USB-C cable and a top thumb slot so the device can be easily pushed out when needed. Dimensions Fits Device: 58.0mm × 23.5mm × 13.1mm (plus 0.8mm total clearance for an easy slip fit) Wall Thickness: 1.6mm Print notes Print vertically (standing on the closed USB-C end) for best results without supports. The 0.8mm clearance provides just enough wiggle room to slide the DAC in and out without it getting stuck.
Print-in-Place Concentric Rings
A set of five concentric rings designed to print in place as a single piece. Excellent as a clearance test for your printer or just a satisfying desk fidget. Remix Hooks This design is built on a few key parameters that are begging to be tweaked depending on what you want to use it for: Wall Thickness: Currently set to 2mm for a solid feel. Clearance: Set to 0.4mm gap between rings. If your printer is finely tuned, drop this to 0.2mm or 0.3mm for tighter tolerances. Height: Currently 8mm, but you can scale this up on the Z-axis to turn them into nesting tubes. Inner Diameter: Starts exactly at 25mm to fit over standard dowels or large fingers.
Homelab Split 1U Rackmount
This is a 1U rackmount adapter specifically sized to hold a TP-Link ER605 router and an OC200 hardware controller side-by-side. Because standard 19" rack widths don't fit on everyday print beds, the mount is split down the middle into two halves that lock together with a snug puzzle-piece joint. The devices slide directly into the support sleeves from the front. Design notes Sleeve design: The open-topped rear trays print natively without supports when the faceplate is laid flat on the bed. Tolerances: The center dovetail includes a 0.2mm clearance to ensure the two halves slide together cleanly right off the plate. Mounting: Standard 1U oval slots give a bit of wiggle room for cage nuts.
Numbered SD Card Organizer Tray
Memory cards scatter across desks and get mixed up between cameras the moment you set them down. This flat organizer tray pins down eight standard SD cards and eight microSD cards in numbered slots, mapping exactly which card belongs to which camera body. Deep semicircular thumb scoops break the flush fit, letting you tilt a card out immediately instead of prying at the edges with a fingernail. Slot Fitment Standard SD: 33 x 25 mm footprint, 2.5 mm deep. MicroSD: 12 x 16 mm footprint, 1.5 mm deep. Print settings: Print flat on the bed. No supports required. The embossed numbers sit 0.6 mm high, resolving cleanly at a standard 0.2 mm layer height.
Honeycomb Pen Organizer Box
What it's for A desktop container designed to hold pens, markers, and tools upright. The interior is divided into a continuous honeycomb matrix, keeping individual pens separated and stopping them from leaning or sliding to the bottom of the box. Dimensions Overall footprint: 106 mm wide × 72 mm deep Overall height: 96 mm Hexagon size: 17.5 mm flat-to-flat (comfortably accommodates standard pens and thicker markers) Wall thickness: 1.5 mm perimeters and interior walls Print notes Print it upright as oriented. No supports required. The dense honeycomb acts as a structural infill for the walls, making the final piece remarkably rigid.
CoilFlex — USB-C Splint
Meet the CoilFlex — a USB-C strain relief boot that balances rigid stability for the connector head with a flexible, coiled tail for the cable. By applying a helical cut pattern to the tail section while preserving a solid spine at the base, it allows the cable to bend naturally without kinking, while the solid front block keeps the delicate connector joint perfectly immobile. Features Rigid Connector Housing: Perfectly sized to hold the 10mm head section motionless. Spiral Flex-Tail: Allows the cable section to bend under stress without pinching. Snap-In Top: A continuous top channel lets you easily press the cable into place. Tapered Transition: Smoothly steps down from the connector block to the coil.