Male SandWing Dragon with Spread Wings
Created today
Description
Full-body standing SandWing dragon with four clawed feet, two fully spread wings, a continuous sail along the head, neck and spine, and a curved scorpion-style tail barb. The head is turned to show the left cheek, left ear and gold hoop.
- Colours: sandy-gold body, tan back scales, cream jaw, belly and tail underside, ivory horns and claws, black eyes.
- Details: one thin gold hoop through the left ear, one lighter healed diagonal scar below the left eye.
- Wings: open wide and slightly upward, with four finger supports and a solid membrane on each side.
- Tail: curves to one side and ends in a barb joined directly to the tail tip.
- Base: low flat plate under the feet.
Images
More like this
Explore more in Decor & Display →
Baby Dragon Figurine, 64x80 mm Base
A baby dragon figurine on a flat 64 x 80 mm base plate, built as one solid piece for FDM printing. Fit and print notes Four short legs, rounded body, small horns, tiny wings and a thick curved tail, all fused to the body. Check before printing: the bed must take about 64 x 80 mm. Prints without supports on its flat base in most cases. The horns and the wing tips are the only overhangs. Not scaled for any particular display stand or holder.
Curly Coated Westie Figure
A white West Highland terrier figure sized for soft, squishy TPU printing. The coat is built from chunky curls, with a heavy fringe over the eyes and hair across the top and sides of the head. Short, stubby legs Floppy ears hanging down the sides of the head Curly coat on body, chest, haunches and head Bare face below the nose Dark nose and eyes, flat underside for stable printing Print in TPU with low infill for a squishy feel.
Soporte de tarjetas con estrella grabada
Bloque rectangular con una ranura central para tarjetas y una estrella de cuatro puntas con lados curvos, grabada hacia el interior de la cara frontal. Bloque de 115 x 25 x 20 mm con bordes achaflanados Ranura de 4 mm de ancho y 10 mm de profundidad, de extremo a extremo Estrella curva de 16 mm de punta a punta, hundida 1,5 mm y centrada en la cara frontal Se imprime sin soportes apoyada sobre su base
Moonlit Ghost Chain Swing Display
A friendly sheet-wearing ghost sits on a chain swing hanging from the horn of a crescent moon, in the spirit of a Halloween nursery rhyme. His blue tennis shoes dangle below the sheet and his hands grip the chains above his head, the way a kid holds on mid-swing. Crescent moon with shallow craters Chain swing with a rounded seat Cut-out eyes and a recessed smile Flat rounded base keeps the whole scene standing upright Sand the edges before handing it to a child.
Street Lamp Base with Domed Foot
A miniature street lamp base for a 1:64 diorama. A domed foot with a flat 7.2 mm bottom rises into a straight 5.5 mm shaft, 10 mm tall overall, with a centred 2 mm through-hole. Height: 10 mm Shaft diameter: 5.5 mm Foot diameter at the flat bottom: 7.2 mm Dome height: 6 mm Through-hole: 2 mm, fully open One solid body with a flat bottom, no decoration
Lotus Flame LED Tealight Holder
A Diwali LED tealight holder: a pointed, flame-shaped white frame stands on a round base, with a red lotus panel set inside it. The lotus is cut clean through the panel, so the LED glow shows through from the front cup. Five red petals wrap the cup, and two large white petals sweep out to the sides. Designed for battery LED tealights only, never real flames. Remix hooks Cup size: 41.6 mm bore, 20 mm deep, 47.6 mm outside. Change the bore for a different tealight brand. Open top, so the LED lifts straight out. Flame silhouette: one width function sets the outline (about 40 mm half-width, 136 mm tall, standing on a 5 mm, 85 mm base). Change the exponents for a slimmer or fuller flame. Lotus pattern: the cutouts are a short list of ellipses (centre petal 11 x 44 mm). Add a ring or swap the shapes, and keep a 2 mm or wider web between openings. Colour split: red panel and front petals, white everything else. The panel sits in a 1 mm slot with 0.1 mm clearance on each face, so it prints flat and drops in. Swap in blue for an accent. Pairs with: a flat LED tealight, or a second panel with a different motif. Starting dimensions Height about 140 mm Width about 120 mm across the outer petals Depth about 85 mm, set by the base Frame 8 mm thick, panel 3.5 mm thick