Moderne Zweifarb-Pflanzenschilder
Created today
Description
Diese drei Pflanzenschilder kombinieren ein sauberes, zweifarbiges Layout mit einer robusten Konstruktion. Der Grundkörper misst 160 mm in der Gesamtlänge, wobei ein verstärkter Erdspieß für sicheren Halt im Substrat sorgt. Der doppelte Rahmen und die moderne serifenlose Schrift heben die Beschriftung ("White Widow" und "The Church") deutlich hervor.
Design- und Druckhinweise
- Zweifarbdruck: Konzipiert für einen Filamentwechsel ab Z-Höhe 2,0 mm. Der Grundkörper bildet das Bett, während Ränder und Text als 0,8 mm starke Akzente aufsitzen.
- Verstärkung: Eine konisch zulaufende Mittelrippe auf dem Erdspieß verhindert ein Abknicken in dichter Erde, ohne den Druck zu verkomplizieren.
- Keine Stützen nötig: Die Schilder liegen komplett flach auf dem Druckbett und können direkt nacheinander oder gleichzeitig gedruckt werden.
Images
More like this
Explore more in Home & Fixtures →
Brutalist Pipe Insert
A heavy-duty ventilation insert featuring an integrated square mesh. The single-ended flange acts as a firm stopping collar, while the dense internal grid blocks debris and insect ingress without severely choking airflow. Designed as a drop-in piece for 80 mm bulkheads or exhaust pipes. Design Notes Mesh: 3x3 mm openings with 1.5 mm solid bars Interface: 80 mm main outer diameter with a 2 mm wall Collar: 5 mm thick flange to prevent over-insertion Printability: Single solid body, optimized for FDM without supports
64mm Straight Cylindrical Pipe
A straight cylindrical pipe designed for flow or structural use, featuring a centered continuous bore. Inner Diameter: 60 mm Outer Diameter: 64 mm Wall Thickness: 2 mm Length: 60 mm Prints vertically without supports.
Ground Spike Cup Base
What it's for A heavy-duty circular base with an integrated ground spike, designed to hold poles, pots, or yard fixtures securely in the grass or dirt. The spike uses a cruciform (fin) shape to maximize holding power in the soil while saving plastic. Dimensions Overall footprint: 115 mm diameter Base height: 25 mm Inner pocket: 65 mm diameter, 20 mm deep (leaving a 5 mm solid floor) Spike length: 80 mm Print notes For best results, rotate the model 180 degrees in your slicer so the flat top of the base sits on the build plate and the spike points straight up. This allows the entire part to print without supports.
Reinforced 8mm Irrigation Y-Splitter
A heavily reinforced Y-shaped hose connector built specifically to merge two fluid lines into one. Designed for 8mm inner-diameter flexible tubing, it uses a solid central hub rather than thin overlapping walls, ensuring the part handles pressure without snapping at the junction. The internal geometry is sculpted to maintain flow: a 6mm channel through the main body prevents a bottleneck at the merge, smoothly necking down to 5mm inside the barbs to guarantee thick, watertight perimeters where the plastic gets thinnest. A precision flat cut on the underside allows the entire assembly to drop straight onto the build plate, completely eliminating the need for support material. Remix Hooks & Constraints Hose Fit: The double barbs peak at 8.5mm OD and drop to a 7.2mm valley, grabbing 8mm ID silicone or vinyl hose tightly. Print Settings: Built for PETG or ABS. Use 4 to 5 perimeters to ensure watertightness and maximum mechanical strength against bending forces. Scaling: Scaling up works cleanly for larger hose (e.g., 125% for 10mm ID), but scaling down is not recommended as the internal channel will restrict flow and the walls may drop below the required thickness for a watertight seal.
Compact 90-Degree Elbow Pipe
What it's for A highly compact 90-degree pipe elbow designed to route fluids or air in tight spaces. Instead of a long, sweeping plumbing radius, this model pulls the corner in as tight as physically possible—bringing the outer inner corner to a sharp point while maintaining a 2 mm smooth transitional radius on the interior flow path to prevent sharp turbulence. Dimensions Outer Diameter: 60 mm Inner Diameter: 56 mm Wall Thickness: Constant 2 mm Straight Sections: 30 mm on each end Print notes Orient the pipe flat on its side (as positioned by default) to print entirely without supports. A brim may be helpful depending on bed adhesion, though the large flat contact patch is usually sufficient.
120mm Self-Watering Planter
A 120mm diameter by 120mm tall self-watering planter designed to keep moisture-sensitive plants like basil alive. The bottom 30mm acts as a dedicated water reservoir, separated from the soil by a perforated platform and a central wicking column. A built-in fill tube routes water directly to the base, while a side window at the 15mm mark provides a visual water level check and acts as a hard overflow drain to prevent drowning the roots. Starting Points for Remixing Scale and Proportions: Overall footprint is 120x120mm. Stretching the Z-axis is straightforward, but requires manually offsetting the 30mm platform and 15mm overflow window to maintain the reservoir geometry. Platform Flow: The internal drainage perforations are currently set to 3.5mm. Widen these for coarse chunky soil mixes, or tighten the grid spacing for more aggressive root aeration. Wicking Column: The central 40mm wicking cone drops to the base with 10mm side slits. Depending on the soil's capillary action, adjusting the slit height changes how quickly the topsoil hydrates. Print Pairings: Prints as one solid piece without supports. Best paired with PETG for long-term water tightness and UV resistance if placed on a windowsill.