Nit version 3
Created 1 months ago
Description
A stepped, precision-style pin featuring a wide base, a straight shaft, and a flared, tapering head. A tight 1mm slot bisects the upper half of the geometry, giving the head flexibility for snap-fit applications or wire routing.
Dimensional Profile
- Total Height: 14.0 mm
- Base Plate: 12.5 mm diameter × 2.2 mm thick
- Shaft: 6.5 mm diameter
- Head Taper: 8.0 mm flaring down to 6.5 mm
- Slot Depth: 7.0 mm (exactly half the overall length)
Images
More like this
Explore more in Workshop & Tools →
5mm Solid Mounting Pin
A solid, non-threaded structural pin designed for aligning and securing aluminum frame extrusions. Modeled with an undersized shaft to account for dimensional expansion during printing. Shaft Diameter: 4.9mm (nominal 5mm fit) Shaft Length: 32mm Head Thickness: 2mm Head Diameter: 9.5mm Note: The 100% infill requirement must be configured in your slicer settings prior to printing to ensure the part achieves maximum shear strength.
4mm Square Key & Mount
The 4mm square key is the thing you can never find when a radiator needs bleeding or a panel needs opening. This gives the key a dedicated wall mount so it actually stays put. Includes a fitted bracket and custom printed M4 screws that use the same 4mm square drive as the key itself — meaning you don't even need a separate screwdriver to mount the bracket. Mounting bracket: 55mm × 15mm Key shaft: 4mm square Screw drive: 4.5mm square recess
17mm Retaining Wedge Fork
A wedge-profile retaining fork designed to slide radially onto a 17mm shaft or groove without flexing. It replaces standard wrap-around snap rings or C-clips where rigid materials prevent a snap-fit. Dimensions Bore / Slot Width: 17mm (straight slide-on clearance) Outer Diameter: 23mm Thickness: Ramps smoothly from 2.9mm at the open tines to 3.0mm at the closed back.
5mm Round Head Pin
A plain round-headed hardware blank, sized to match standard 5mm metric fasteners but stripped of threads and drive features. Modification Points Dimensions: 5mm shaft diameter, 32mm shaft length (35mm overall). Tolerances: Prints exactly at 5mm. Scale the shaft down slightly (or drill your target hole) if you need a slip fit. Derivatives: Easy to modify into a clevis pin by adding a cross-hole near the tip, or cut a slot across the top to return it to a flathead.
Zauberstab Verschluss 2.0
Zweiteiliger, hohler zylindrischer Testkörper zur Prüfung von FDM-Toleranzen. Beide Teile verfügen über eine geschlossene Außenwand und schließen bündig ab. Feste Abmessungen: Außen 30.8 mm, Innen 21.8 mm Mindestwandstärke: 1.5 mm im kritischen Bereich der Nuten Mechanismus: Bajonettverschluss mit Arretierungsnocke gegen unbeabsichtigtes Öffnen Druckbar: Ohne Stützstrukturen, flach auf dem Druckbett positioniert
Plush Canvas Boundary Gauge
A stark, unyielding boundary for plotting out your plushie features. This gauge isolates a perfect 100 by 100 millimeter square, stripping away the bulky machine clips and mounting hardware of a traditional Janome SQ10b hoop to leave only the raw workable area. Pressed directly against a curved fabric face, it frames exactly where the needle can reach before the machine ever turns on. Internal Canvas: Exactly 100 × 100 mm with dead-sharp corners to preserve the true bounding box. Outer Profile: 120 × 120 mm with gently eased 3 mm corners to prevent snagging the pile. Gauge Thickness: A low-profile 3 mm drop, stiff enough to frame the fabric without bowing.