Description
pi02w_allo-mini-boss
Images
More like this
Explore more in Desk & Tech →
Aero — Windowed iPhone 13 Case
A custom-fit TPU or rigid shell for the iPhone 13. This model secures the device by preserving the upper retaining lip around the entire perimeter. The button zones have been converted from open edges into generous side windows—exposing the hardware for clean, tactile presses while maintaining the structural rigidity required for a snap-on fit. Features Retained Lip: The front edge wraps uninterrupted around the face of the phone to keep it locked in. Button Windows: Wide, centered side cutouts give your thumbs unobstructed access to the volume, mute, and power hardware. Camera & Port Clearance: Precise cutouts for the rear camera bump and the bottom lightning/speaker array. Print notes If printing in rigid filament (PLA/PETG), ensure your printer is well-calibrated; a slightly tighter tolerance may snap. TPU is recommended for the best balance of flex and grip.
Arc Reactor Docking Console
A modular desktop console base designed to securely dock and display a prop Arc Reactor. The underlying architecture prioritizes easy electronic integration without resorting to threaded inserts or messy glue. The chassis walls run at a lean 2 mm, shedding unnecessary material while preserving the rigid industrial aesthetic. Integration Points OLED Mount: A friction-fit slide track drops down directly behind the front JARVIS bezel, sized for a standard 0.96-inch (128x64) I2C OLED PCB (roughly 27.5 mm width). Control Board Cradle: The bottom service panel incorporates a built-in snap-fit cradle engineered for a standard ESP32 development board, positioned exactly in line with the rear USB-C access port. Reactor Mount: Features a 93 mm forward-pitched docking collar. Clearances: The top dock, bottom panel, and front bezel are modelled as separate bodies in the source for multi-part printing if needed, built with 0.4 mm clearances where they meet.
双风扇免螺丝网络设备外壳
一个为带有双40mm散热风扇和WT32-ETH01模块设计的设备底盒与盖板套装。 尺寸空间：内部预留 10.5 × 6.5 cm 的主板空间。 散热结构：左右两侧外扩式双风扇舱，支持 40×40×10mm 风扇像抽屉一样从下方滑入，外侧配有防触碰百叶栅格。 固定方式：底盒内集成 4 个盲孔定位柱用于垫高和安放主板，网口处设有 U 型支撑座。 免螺丝锁紧：分体式顶盖自带卡扣，盖合时顶盖内侧的下压柱会直接抵住网口金属壳，实现内部模块的免螺丝固定。
Harmonica Acoustic Silencer
A two-piece, snap-fit acoustic silencer for a standard 10-hole diatonic harmonica (like the Fender Blues Deluxe). Features a continuous lip opening for unrestricted playing across all 10 holes. Integrated three-chamber acoustic labyrinth forces exhaust air and sound through a tortuous path, reducing volume while maintaining airflow. Internal cavity includes space for 4mm acoustic foam (to be added manually). 6-point integrated snap-fit and alignment pin system requires no extra hardware. Print both halves flat on the build plate. No supports should be strictly necessary for the main geometry.
Trade Paperback Honeycomb Bookmark
Honeycomb relief bookmark. Fits standard hardcovers and trade paperbacks. At 1.2mm overall thickness, it sits flat between the pages without stressing standard textbook or hardcover bindings, but may cause spine stretch if left for extended periods in tightly bound mass-market paperbacks. Fitment Dimensions Overall length: 140mm Overall width: 30mm Maximum thickness: 1.2mm Relief depth: 0.4mm
Solid Back iPhone 13 Case
A custom-fit TPU or rigid shell for the iPhone 13 that prevents the phone from slipping or taking raw impacts on the edges. The back is a solid panel for maximum protection. The button zones feature wide windows rather than thin button-covers, exposing the actual hardware so you get the real tactile click of the buttons without fighting the case material. Print Notes Fit Tolerance: Exact to the iPhone 13 body (71.5 mm x 146.7 mm). Material: TPU is highly recommended to let the lip flex over the screen edge. Rigid filaments like PETG will be a very tight snap-fit.