VoyageCover — Sliding Luggage Tag
Created 3 months ago
Description
Keep your personal details secure while on the move with VoyageCover, a privacy-focused luggage tag built for standard business cards. Featuring an integrated sliding cover panel, it conceals your address and contact information from casual passers-by while ensuring it remains fully accessible to baggage handlers when needed.
Features
- Privacy Shield: A specialized sliding track mechanism keeps personal information hidden until manually opened.
- Standard Sizing: Carefully dimensioned to perfectly house an 85 x 55 mm business card without trimming.
- Integrated Strap Slot: A heavy-duty attachment point designed for standard luggage lanyards and tethers.
Specifications
- Card Window: Designed with 86 x 56 mm clearance for an easy fit.
- Perimeter: 5 mm reinforced border to withstand the rigours of transit.
Photos
Technical views
More like this
Explore more in Keychains & EDC →
Eyeless Alien Duck Keychain
Small keys vanish into the depths of bags when left loose. This chunky bath duck acts as an anchor to prevent them from slipping out of reach. It features a bulbous alien-proportioned head, dual antennas, and a completely featureless face for a distinct silhouette. Sizing and Setup Overall height: 47 mm Mounting: 5 mm integrated loop for standard split rings Printing: Flatted base sits flush on the bed; prints as one solid piece.
Karius Asset Keychain Tag
A custom navy and orange keychain tag built to spec. Dimensions: Rounded square profile with an offset triangular fob loop. Graphic: A heavily customized initial 'K' with carefully balanced 45-degree stroke angles, rounded terminals, and a detached bottom leg. Detail: Features a crisp white asset number in Montserrat for contrast against the navy body.
Football Keycap Topper
A custom Cherry MX-compatible mechanical keycap featuring a gently domed top and recessed seams, channeling the look of a classic basketball. Built from the ground up to respect a precise 17.25mm footprint, it trades the standard typing dish for a smooth, tactile convex surface. Court-Ready Specs Switch Profile: Deep Cherry MX compatible stem with a flared entrance for an easy press-fit. Surface Feel: A smooth domed top intersected by 0.6mm-deep recessed channels tracing the iconic hoops cross-and-arc pattern. Dimensions: Exact 17.246 mm square footprint at the base, tapering cleanly up to the rim. Printability: Designed fully manifold with built-in internal bracing ribs. The bottom cross interface is lightly chamfered to combat elephant's foot and ensure tight tolerances straight off the bed.
M22 Threaded Kettlebell Stash
A two-piece threaded kettlebell stash keychain. The main body has been hollowed out to maximize internal storage, then split squarely at the equator with a sturdy 2mm-pitch thread holding the halves together. Both halves print exactly as oriented — the base sits flat on its machined underside, and the top half prints directly on its equator ring. Fitment Notes Thread Clearance: Engineered with a 0.5mm radial offset on the internal thread. Check your flow rate if the halves bind on the first turn. Split Ring: The arch remains standardized for a 1.5mm wire gauge ring. Internal Volume: The cavity is approximately 20mm wide and 19mm deep when closed. Fits standard folded emergency bills or small hardware.
CourtGuard — Vented Finger Splints
Designed to quickly immobilise jammed or sprained fingers, CourtGuard splints provide rigid support without trapping moisture. Ideal for handling the inevitable basketball court impacts, the half-cylinder trough design features a rounded capsule geometry that sits comfortably against the skin without digging in. A dorsal ridge of vent holes keeps the finger cool during recovery, while integrated side notches securely anchor standard Velcro straps to keep the splint exactly where it belongs. Sizes Included Small (Pinky): 55mm length, 15mm inner diameter, 4 vent holes. Medium: 65mm length, 18mm inner diameter, 5 vent holes. Large: 75mm length, 21mm inner diameter, 6 vent holes. Print Notes All three sizes are designed to print-in-place in their current flat orientation, requiring absolutely no supports. A rigid material like PETG or standard PLA is recommended for maximum immobilization.
60mm Print-In-Place Concentric Gyro
A four-ring concentric gimbal toy designed for fully assembled printing. The rings pivot independently on alternating axes using built-in conical hinges. All exterior edges are rounded for comfort. Clearances: 0.5 mm radial and axial gap between all moving surfaces. Overhangs: Conical pivots operate at a 45-degree angle, requiring no supports. Base: Rings are coplanar at z=0 to ensure solid bed adhesion. Dimensions: 60 mm outer diameter, 12 mm overall thickness.