70x25mm Money Clip Bottle Opener
Created 3 months ago
Description
A combination money clip and bottle opener designed to be printed as a birthday gift. The part features a functional bottle cap catch tooth integrated directly into the solid end of the body, allowing the closed section to act as a fulcrum. The primary flat face is embossed with the word "DAD", and the open end utilizes a flared entry slot that tapers to create tension against folded currency.
Specifications
- Dimensions: 70mm x 25mm footprint
- Capacity: Toleranced to secure a stack of approximately 8 folded banknotes
- Features: Integrated side-profile bottle opener notch and embossed text
- Print Orientation: Recommended to print laterally (with the 'U' profile flat against the build plate) to align layer lines for maximum flexural strength without snapping
Images
More like this
Explore more in Keychains & EDC →
Enclosed Auto-Return Clicker
An enclosed, print-in-place mechanical clicker with a dedicated auto-return spring. The internal mechanism is fully hidden, leaving just the thumb lever exposed for a cleaner look and a protected mechanism. Internal Clearance: Prints with a 0.5mm gap between the top roof and the lever, letting it move freely straight off the bed. Enclosed Shell: Total height is bumped to 11mm to give room for the solid 1.5mm top and bottom walls. Remix Hooks: The internal spring thicknesses (1.0mm for the click, 1.2mm for the return) dictate the feel. Thin them by 0.2mm for a much lighter touch, or increase the internal height if you want to experiment with deeper cams.
Chunky Modern Type Keychain
A solid, pocket-sized keychain featuring a custom typographic design. The base perfectly contours the bold lettering, creating a clean and modern silhouette that feels sturdy in hand. Pocket-Friendly Size: Scaled down to slide easily into a pocket without snagging. Sturdy Build: A solid 5 mm base prevents flexing, with 2 mm raised lettering that holds up to daily wear. Ready to Mount: Features a fully through 5 mm keyring hole to accommodate standard rings or small carabiners.
Dog Remote Belt Holster 3
Fumbling for the remote when you actually need it defeats the point of having one. This holster locks the transmitter to your belt so it stays exactly where your hand expects it to be. The front channel leaves the main buttons clear to press without drawing the remote, and the bottom cutout lets you push it up easily when you do need it. Fit Details Sleeve Dimensions: Fits bodies up to 34 mm wide and 28 mm thick. Clip Capacity: Fits belts up to 45 mm (1.75 inches) wide and 6 mm thick. Printing: Print standing upright. PETG is strongly recommended over PLA so the belt clip has enough flex to snap over your belt without snapping off.
19.6mm Peg Fidget Base
Stripped-down version of the 70% scale mini fidget, retaining only the primary 48mm base and the 8mm rattle beads. All slider, cap, and collar mechanics have been deleted from the layout. Fitment and Clearances Base Peg: Measures exactly 19.6mm in diameter after the 70% scale factor is applied. Beads: Scale down to 5.6mm diameter. Compatibility: Does not include the upper chamber; the beads are supplied loose and will not be contained unless mated to a custom upper receiver.
Mickey Lip Balm Keychain
A whimsical, two-piece threaded capsule designed to hold a standard tube of lip balm. The design features a screw-on top shaped like a familiar mouse character with a built-in keychain loop for easy carry. Remixing this model Bore size: The internal cavity is 17.5mm wide, perfect for standard chapstick. Expand this if your preferred brand uses a wider tube. Thread clearance: Printed threads are built with a 0.6mm clearance to turn smoothly right off the bed. Alignment: When screwed shut, the character's face might not perfectly align with the buttons due to thread timing. A light sanding on the lip of the base will let you dial in the exact stopping point.
Football Keycap Topper
A custom Cherry MX-compatible mechanical keycap featuring a gently domed top and recessed seams, channeling the look of a classic basketball. Built from the ground up to respect a precise 17.25mm footprint, it trades the standard typing dish for a smooth, tactile convex surface. Court-Ready Specs Switch Profile: Deep Cherry MX compatible stem with a flared entrance for an easy press-fit. Surface Feel: A smooth domed top intersected by 0.6mm-deep recessed channels tracing the iconic hoops cross-and-arc pattern. Dimensions: Exact 17.246 mm square footprint at the base, tapering cleanly up to the rim. Printability: Designed fully manifold with built-in internal bracing ribs. The bottom cross interface is lightly chamfered to combat elephant's foot and ensure tight tolerances straight off the bed.