Description
Small keys vanish into the depths of bags when left loose. This chunky bath duck acts as an anchor to prevent them from slipping out of reach. It features a bulbous alien-proportioned head, dual antennas, and a completely featureless face for a distinct silhouette.
Sizing and Setup
- Overall height: 47 mm
- Mounting: 5 mm integrated loop for standard split rings
- Printing: Flatted base sits flush on the bed; prints as one solid piece.
Images
More like this
Explore more in Keychains & EDC →
Eyeless Alien Duck Keychain
Small keys vanish into the depths of bags when left loose. This chunky bath duck acts as an anchor to prevent them from slipping out of reach. It features a bulbous alien-proportioned head, dual antennas, and a completely featureless face for a distinct silhouette. Sizing and Setup Overall height: 47 mm Mounting: 5 mm integrated loop for standard split rings Printing: Flatted base sits flush on the bed; prints as one solid piece.
BTS Balm Capsule
A bright pink travel capsule sized for standard lip balm tubes, featuring the BTS door logo repeating across the exterior. The friction-fit cap includes a sturdy heart-shaped loop for attaching to a keychain or lanyard, keeping your balm secure and accessible on the go. Staggered logo pattern wrapping both the sleeve and cap Built-in push hole at the bottom to easily eject the tube Sized with a 16mm inner diameter to prevent rattling
Stenhus Gymnasium Nøglering
En robust nøglering med Stenhus Gymnasiums navn sat op i blok-format (hvor linjerne er tvunget til samme bredde), og et dedikeret svunget bølge-symbol i venstre side med vandrette afskæringer i top og bund. Mål: Basen er 90 x 30 mm med afrundede hjørner og et forstærket hul til nøgleringen. Relief: Både tekst og logo løfter sig diskret 0,6 mm fra basen, hvilket giver et skarpt print uden at det griber for meget fast i lommen. Tekst: Ordene er sat med Roboto, hvor bunden er skaleret for at give et balanceret, tungt udtryk.
Captive-Pea Emergency Keychain Whistle
A 50mm print-in-place emergency whistle built around a 12mm spherical resonating chamber. It features a tapered mouthpiece and an integrated 7mm captive pea that creates a high-decibel warble, all packed into a low-profile keychain block. Remix Hooks & Constraints Chamber Geometry: The fundamental tone is dictated by the 12mm sphere. Expanding this chamber lowers the pitch, while shrinking it creates a sharper, higher shriek. Captive Pea: The 7mm pea prints with a 0.2mm floor gap. This clearance is just tight enough to prevent the sphere from tearing off the build plate, but weak enough to break free with a pen tip. Windway & Fipple: The air channel is fixed at 1.5mm high to compress the airstream before it hits the 45-degree splitting edge. Changing the fipple angle will dramatically alter the sound quality. Mounting Loop: The 5mm bore at the rear fits standard split rings and 550 paracord. If scaling the model for a heavier carabiner, reinforce the tail block first.
Chunky Modern Type Keychain
A solid, pocket-sized keychain featuring a custom typographic design. The base perfectly contours the bold lettering, creating a clean and modern silhouette that feels sturdy in hand. Pocket-Friendly Size: Scaled down to slide easily into a pocket without snagging. Sturdy Build: A solid 5 mm base prevents flexing, with 2 mm raised lettering that holds up to daily wear. Ready to Mount: Features a fully through 5 mm keyring hole to accommodate standard rings or small carabiners.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.