Farmhouse Fowl Egg Cradle
Created today
Description
A stylized, softly rounded chicken figure designed to serve as a breakfast egg cup or countertop display. The back features a contoured recess sized to securely cradle a standard large chicken egg, resting on a flat base for stability.
Design Notes
- Capacity: Holds one standard large egg (up to ~45mm diameter).
- Printability: The base is cut perfectly flat to sit on the build plate. The egg recess curves gently upward to avoid steep internal overhangs.
- Assembly: Modeled as a single solid piece; the colored regions are for visual reference and multi-material painting.
Images
More like this
Explore more in Kitchen & Bathroom →
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
Cylindrical Jet Manifold Housing
Standard shower heads never hit from all sides, and piecing together a ring of PVC pipes takes up too much room. This is a monolithic print that surrounds the target with water. The housing has an integrated annular water jacket hidden entirely inside the walls. A standard 3/4-inch male garden hose thread feeds the manifold, which then pressurises an array of flush, radially aligned internal jets. Clearances & Details Internal cavity: 55 mm diameter, ~153 mm depth, open at the base and domed at the top. Wall thickness: Built with 3.5 mm inner and 4.5 mm outer structural walls to hold standard tap pressure. Inlet: 3/4-11.5 NH standard hose thread. Printing: The manifold roof is internally chamfered, allowing it to print upright with zero internal supports.
Ribbed Bathroom Pot
Tall, top-heavy bathroom items have a habit of tipping over or leaving residue on the counter. This ribbed pot is built with thick walls to stay put, corralling toothbrushes, razors, or makeup brushes so they stop sliding around. Fit & Print Outer diameter: 80 mm Height: 100 mm Internal diameter: 72 mm Features: The inside base has a 4mm fillet (a smooth curved transition) instead of a sharp corner, so toothpaste or dust can't get permanently stuck in the bottom rim. Printing: Prints straight on the bed. No supports required.
Slotted Arch Napkin Holder
A modern, pill-shaped ribbed napkin holder designed to maximize footprint while minimizing print time. The wide stance prevents tipping, and the skeletal ribbing drastically cuts down on plastic use while maintaining structural rigidity. Remix Hooks Slot Width & Spacing: Currently set to 6mm slots spaced 12mm apart. Widening the slots makes for an even faster, more airy print. Wall Thickness: Built with 3mm walls, balancing speed and durability. Can be thickened for a heavier base. Top Sweep: The curved top dip (cut by a 180mm cylinder) can be flattened or deepened depending on the size of the napkins it needs to hold. Base Tub: The bottom 15mm is solid to catch crumbs and anchor the napkins securely.
Bulk Floss Spool Dispenser
What it's for A two-part refillable dispenser designed to house standard bulk dental floss spools. The enclosure features a fluted exterior for secure handling and a tapered friction-fit lid with a thumbnail slot for easy reloading. A 1.5 mm side exit channel guides the floss to a sharp, wedged V-notch on the upper rim, allowing for clean tears without requiring a separate metal cutting insert. Dimensions Internal Chamber: 40.5 mm diameter by 12.2 mm deep, accommodating standard 40x12 mm bulk spools. Center Axle: 5 mm diameter, 12 mm tall. Overall Footprint: 46 mm external diameter by 16 mm tall. Remix ideas Resize the central axle to fit non-standard spool cores. Adjust the internal chamber depth for larger commercial floss reels. Swap the fluted exterior for a heavy knurl. Modify the exit hole diameter to accommodate thicker woven floss or tapes.
Mason Jar Fly Trap Lid
Leaving a bowl of vinegar on the counter just means you eventually knock over a bowl of vinegar. This insert replaces the flat lid in a canning ring to turn any jar into a one-way trap Diameter: 84 mm (fits the ring). Depth: 35 mm funnel projection into the jar. Exit Aperture: 4 mm (wide enough to enter, too narrow to navigate back). Printability: The flat face sits on the bed. The funnel tapers upward. Zero supports needed.