Montana keychain
Created 11 days ago
Description
A 50×20mm solid fob block featuring a standard 4.5mm through-bore on the left flank, properly sized to clear 4mm jump rings or standard split rings without binding.
- Clearances: The bore is positioned to leave exactly 4.75mm of solid wall at the left edge.
- Chassis: Base deck sits at exactly 3.0mm thick, laying completely flat on the build plate.
- Emblem: A classic bowtie geometric profile raised 0.8mm above the base, bringing overall thickness to 3.8mm.
Fits standard key rings, though heavy-duty 5mm carabiner hooks will not clear the bore.
Photos
Technical views
More like this
Explore more in Keychains & EDC →
Karius Asset Keychain Tag
A custom navy and orange keychain tag built to spec. Dimensions: Rounded square profile with an offset triangular fob loop. Graphic: A heavily customized initial 'K' with carefully balanced 45-degree stroke angles, rounded terminals, and a detached bottom leg. Detail: Features a crisp white asset number in Montserrat for contrast against the navy body.
BTS Balm Capsule
A bright pink travel capsule sized for standard lip balm tubes, featuring the BTS door logo repeating across the exterior. The friction-fit cap includes a sturdy heart-shaped loop for attaching to a keychain or lanyard, keeping your balm secure and accessible on the go. Staggered logo pattern wrapping both the sleeve and cap Built-in push hole at the bottom to easily eject the tube Sized with a 16mm inner diameter to prevent rattling
Stenhus Gymnasium Nøglering
En robust nøglering med Stenhus Gymnasiums navn sat op i blok-format (hvor linjerne er tvunget til samme bredde), og et dedikeret svunget bølge-symbol i venstre side med vandrette afskæringer i top og bund. Mål: Basen er 90 x 30 mm med afrundede hjørner og et forstærket hul til nøgleringen. Relief: Både tekst og logo løfter sig diskret 0,6 mm fra basen, hvilket giver et skarpt print uden at det griber for meget fast i lommen. Tekst: Ordene er sat med Roboto, hvor bunden er skaleret for at give et balanceret, tungt udtryk.
Captive-Pea Emergency Keychain Whistle
A 50mm print-in-place emergency whistle built around a 12mm spherical resonating chamber. It features a tapered mouthpiece and an integrated 7mm captive pea that creates a high-decibel warble, all packed into a low-profile keychain block. Remix Hooks & Constraints Chamber Geometry: The fundamental tone is dictated by the 12mm sphere. Expanding this chamber lowers the pitch, while shrinking it creates a sharper, higher shriek. Captive Pea: The 7mm pea prints with a 0.2mm floor gap. This clearance is just tight enough to prevent the sphere from tearing off the build plate, but weak enough to break free with a pen tip. Windway & Fipple: The air channel is fixed at 1.5mm high to compress the airstream before it hits the 45-degree splitting edge. Changing the fipple angle will dramatically alter the sound quality. Mounting Loop: The 5mm bore at the rear fits standard split rings and 550 paracord. If scaling the model for a heavier carabiner, reinforce the tail block first.
Chunky Modern Type Keychain
A solid, pocket-sized keychain featuring a custom typographic design. The base perfectly contours the bold lettering, creating a clean and modern silhouette that feels sturdy in hand. Pocket-Friendly Size: Scaled down to slide easily into a pocket without snagging. Sturdy Build: A solid 5 mm base prevents flexing, with 2 mm raised lettering that holds up to daily wear. Ready to Mount: Features a fully through 5 mm keyring hole to accommodate standard rings or small carabiners.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.