OO Scale Terrace Houses Half Relief Flat Pack
Created 1 months ago
Description
What it's for
A three-house flat-pack terrace kit designed for OO gauge (4mm to the foot) railway modeling. Includes a unified front facade, separate sloped end panels, a tiled roof spanning all three dwellings, and individually printed window and door inserts. The flat-pack layout ensures pristine surface details right off the build plate without relying on supports.
Dimensions
- Total Span: 180 mm wide facade (matching standard OO scale footprints for a terrace trio).
- Max Height: 85 mm at the rear roof peak.
- Inserts: Doors scaled accurately to 26 mm tall, with classic 18 mm sash windows.
Assembly
The main panels feature precision 45-degree mitred edges on the front and sides for seamless corner joints. Interlocking stone quoins wrap neatly around the assembled corners. Print the window and door inserts separately, paint as desired, and secure into the recessed front facade openings.
Photos
Technical views
More like this
Explore more in Automotive, RC & Hobby →
Oo scale buildings half relief roof with ridge tiles
Two tiled OO-scale roof slopes, two slated roof slopes, five brick chimneys and a downpipe, all laid out to fit a 256 × 256 mm bed in one plate. Remix hooks Layout: the four roofs sit side by side along X, with chimneys and the downpipe in the strip on the right. The whole set spans about 240 × 156 mm. Tiled roofs: 46 × 156 mm slab, 3 mm thick, 4.5 mm radius ridge tile wrapping 135°, half-round gutter with 2 mm opening and 0.8 mm walls, closed ends and a 2 mm outflow hole. Slated roofs: 46 × 130 mm, 30° pitch, 2.5 mm courses, 7 mm slates, no gutter. Chimneys: 7 × 7 mm, 16 mm tall, base cut at 30°, printed upside down. Change the height or the cut angle for other roofs. Downpipe: 2 mm × 110 mm solid rod. Lengthen it or add brackets. Pairs well with a printed wall or building shell that matches the 30° and 45° pitches.
OO Gauge semi detached house stone v2
A semi-detached OO gauge house pair with stone walls, a one-piece roof, separate door and window inserts, and chimneys supplied as flat-pack panels. The two 72 mm frontages sit side by side (144 mm overall) with quoins only at the outer ends. Each chimney is four panels plus a capped top, printed flat and joined by a thin 0.4 mm web. A second web holds the windows and door together on the plate. Remix hooks Chimney slope: side panels run 9 to 18 mm high at 45°. Change the two heights to suit a different roof pitch. Panel thickness: 1.5 mm. Thicker panels give stronger glue joints. Web: 0.4 mm tall with 1.2 mm bars. Cut it away after printing, or thin it further. Pairs with: the L-shaped corner brackets (10 × 10 mm legs, 15 mm long) for gluing the walls square.
Bay windows for shops
OO scale bay window body, 36 mm wide, 13 mm deep and 40 mm high, with 13 mm of brickwork at the base and three window openings above. Three open window frames print separately on the plate for painting and gluing into the openings. Scale: OO gauge (4 mm to 1 ft) Overall size: 36 × 13 × 40 mm Brickwork: 13 mm high, horizontal courses with staggered joints Front window: 24 mm wide opening; two angled side windows about 14.3 mm wide Frames: 1.6 mm thick with 1.6 mm borders and a through-opening Fit: frames sized with clearance to their openings Back: open, for gluing to a wall
Gancho de Garrafa com Braçadeira Snap
Gancho de garrafa de treino em J, 200 mm, com braçadeira bipartida na base: corpo fixo ligado à haste e tampa separada que fecha por encaixe de pressão ao redor da alça de 12 × 24 mm. Pontos de remix Snap-fit: ganchos flexíveis de 8 mm de comprimento, 1,8 mm de espessura e ressalto de 0,6 mm (armlen, armt, ridge). Entrada em rampa, retenção reta. Folga: 0,2 mm entre tampa e corpo (gap). Trava extra: furo M3 em gota atravessando tampa e corpo, com porca sextavada embutida no lado +X. Paredes: wallx (6,4 mm) e wallf (7,5 mm) definem o tamanho externo; reduza se o furo M3 for dispensado. Haste e gancho: inalterados, seção 10 × 14 mm, bojo de 40 mm, boca de 34 mm. Combina com: parafuso M3 e porca M3 (opcionais); imprima corpo e tampa separados em PETG ou PLA.
Triple Socket Adapter Floor Cradle
What it's for A one-piece floor cradle that holds a triple 12V socket adapter horizontally under a dashboard. The front and top stay open, so the sockets and power switches remain reachable, and side windows keep the side USB ports clear. Dimensions Adapter: 100.4 x 60.85 x 31.72 mm, about 1 mm clearance Side walls: 3 mm thick, 14 mm tall Side windows: 18 mm long, centred 51.38 mm from the front (plus 1 mm clearance) Back lip: 12 mm tall with reinforced corners Mounting ears: 16 mm each end, countersunk screw holes Remix ideas Change the window length to fit a different USB port. Add a third screw hole at the back. Lengthen the ears for wider mounting.
10-Tooth Module 0.5 Spur Gear
What it's for A small straight-cut involute spur gear for miniature gear trains, hobby motors and small mechanisms. It is a single solid body with a bore that passes fully through. Dimensions Teeth: 10 Module: 0.5 mm (pitch diameter 5 mm) Outside diameter: 6 mm Pressure angle: 20° Bore: 2.5 mm, through Face width: 5 mm Remix ideas Pair it with a larger module 0.5 gear for a reduction stage. Add a set-screw hub for a motor shaft. Swap the round bore for a D-shaped one.