Paper Towel Core Stabilizer Cap
Created 1 months ago
Description
A tapered palm-rest cap designed to drop into the top of a standard kitchen roll. It provides a wide, smooth surface for your hand to press down on while tearing off a sheet, stabilizing the unit without pinching the paper towel itself.
The tapered body ensures a loose spinning fit inside standard cardboard cores, while the hollow interior clears the paper towel holder's central upright.
Fitment Measurements
- Cardboard Core Insert: Tapers from 41.5mm at the top down to 36mm at the base.
- Upright Clearance Bore: 32mm internal diameter.
- Palm Rest: 80mm wide.
If your printed upright is wider than 32mm in diameter, the internal bore will need to be expanded to fit.
Images
More like this
Explore more in Kitchen & Bathroom →
Wall-Mount Paper Towel Brackets
A two-piece mounting bracket system designed to hold standard 11-inch (280mm) paper towel rolls. The split design allows you to install it under cabinets or flat against a wall at whatever width fits your specific brand of towels, while the oversized hubs keep the roll spinning freely without dropping. Specifications Clearance: Designed with a 95mm reach to clear standard and jumbo rolls. Hub Size: 34mm core with a 39mm chamfered retaining lip. Mounting: Two counterbored screw holes per bracket (fits #8 or 4-5mm wood/drywall screws). Printing: Both brackets are designed to print without supports when laid flat on their outer sides.
Farmhouse Fowl Egg Cradle
A stylized, softly rounded chicken figure designed to serve as a breakfast egg cup or countertop display. The back features a contoured recess sized to securely cradle a standard large chicken egg, resting on a flat base for stability. Design Notes Capacity: Holds one standard large egg (up to ~45mm diameter). Printability: The base is cut perfectly flat to sit on the build plate. The egg recess curves gently upward to avoid steep internal overhangs. Assembly: Modeled as a single solid piece; the colored regions are for visual reference and multi-material painting.
AeroDock — Open Ring Dryer Mount
The AeroDock is a wall-mounted dock designed to hold a standard hair dryer securely and keep bathroom counters clear. Featuring a 65mm C-ring cradle, it allows the dryer to drop in nose-down while keeping the cord cleanly draped through the front opening. A solid backplate gusset ensures the mount stays rigid under the weight of the appliance. Features Open Cradle: The 38mm front slot makes it easy to lift the dryer in and out without tangling the cord. Reinforced Backbone: A substantial center gusset bridges the cradle to the wall plate for maximum strength. Flush Mounting: Recessed countersinks for screws keep the mounting hardware flush and out of the way. Print Notes Designed for straightforward manufacturing. Orient the model flat on its backplate on the build surface, and it will print entirely without supports.
Silo-Chute Bag Clip
A miniaturized silo gate for the kitchen counter, built to route dry goods smoothly from bag to bowl. It merges a rigid slide-action seal with an integrated pour channel, ending the morning ritual of scattering cereal and rice across the floor. The two-part mechanism locks down folded plastic tight against moisture, while the tethered plug keeps the channel safely closed between pours. Design Details Slide-On Seal: Replaces weak spring hinges with a continuous sliding compression sleeve for a tighter grip. Flared Channel: The 15mm inner diameter spout guides grains and small cereals directly to the target without the need for a separate funnel. Integrated Tether: A flexible arm ensures the tapered sealing plug is never lost in the kitchen drawer.
Cylindrical Jet Manifold Housing
Standard shower heads never hit from all sides, and piecing together a ring of PVC pipes takes up too much room. This is a monolithic print that surrounds the target with water. The housing has an integrated annular water jacket hidden entirely inside the walls. A standard 3/4-inch male garden hose thread feeds the manifold, which then pressurises an array of flush, radially aligned internal jets. Clearances & Details Internal cavity: 55 mm diameter, ~153 mm depth, open at the base and domed at the top. Wall thickness: Built with 3.5 mm inner and 4.5 mm outer structural walls to hold standard tap pressure. Inlet: 3/4-11.5 NH standard hose thread. Printing: The manifold roof is internally chamfered, allowing it to print upright with zero internal supports.
Ribbed Bathroom Pot
Tall, top-heavy bathroom items have a habit of tipping over or leaving residue on the counter. This ribbed pot is built with thick walls to stay put, corralling toothbrushes, razors, or makeup brushes so they stop sliding around. Fit & Print Outer diameter: 80 mm Height: 100 mm Internal diameter: 72 mm Features: The inside base has a 4mm fillet (a smooth curved transition) instead of a sharp corner, so toothpaste or dust can't get permanently stuck in the bottom rim. Printing: Prints straight on the bed. No supports required.