Pickleball Paddle Name Stamp with Handle
Created today
Description
Custom ink stamp showing a tilted pickleball paddle with a perforated pickleball in the head and the name "Pat" centered below. The design is mirrored so it prints correctly when stamped, and a flared grip handle sits on the back of the plate.
- Plate: 62 × 86 mm base, 4 mm thick, rounded corners
- Relief: 2 mm raised design, paddle tilted 35°
- Ball: 17 mm diameter with 19 holes (1 center, 6 inner ring, 12 outer ring)
- Handle: 22 × 38 mm stem with 34 × 44 mm cap, about 36 mm overall height
- Print orientation: design face down on the bed, no supports needed
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Women's Sunglasses Frame with Folding Arms
Printed sunglasses where the parts crowd each other on the plate and fuse: this set lays the frame, two folding arms, ribbon inserts and hinge pins out with clear space between them. Frame width: 145 mm, 50 mm tall, 5 mm plate, hinge ears 18.5 mm high Lens openings: 50 × 36 mm each, 16 mm bridge gap Arms: about 139 mm long, 8 mm wide, 6 mm thick, with at least 4.8 mm between each part on the plate Hinge pins: four, 2 mm across, in 2.4 mm holes Hearts and breast cancer awareness ribbons recessed 1 mm on the frame and arms Print flat, no supports needed for the arms
Print-in-Place Articulated Dragon Fidget Toy
Articulated dragon with a horned head, ten hinged body segments and back spikes. It prints as one piece with no assembly, and the body flexes in a wave when held. Joints: pin hinges with 0.4 mm clearance per side, alternating between side-to-side and up-down bending Segments: 10, tapering from an 18 mm wide head to a narrow tail Size: about 155 mm long, 12 mm tall without spikes Print: lay flat, no supports intended for the body; 0.2 mm layers, PLA or PETG After printing: bend each joint back and forth to break the hinges free Use: desk fidget, sensory toy
Schild 200 x 100 x 8 mm Sauerteig
Schild mit zweizeiliger Beschriftung "Natur" und "Sauerteig" und einer Aufhängeöse oben mittig. Platte schwarz, Schrift weiß und erhaben, als ein zusammenhängendes Teil für Mehrfarbdruck. Platte: 200 × 100 × 8 mm, Ecken gerundet Öse: 30 mm Außendurchmesser, 14 mm Loch, Gesamthöhe 120 mm Schrift: 32 mm hoch, 0,6 mm erhaben, 0,2 mm eingelassen Druck: Drucker mit automatischem Filamentwechsel (z. B. AMS), 3MF empfohlen
Magic octagon coin.
An octagon coin whose raised arrow disappears into the bed side: the underside is now flat with the arrow cut in as a shallow dent, so no layer prints over empty air. Size: 50 mm across corners, 3 mm body, 4.2 mm total height. Top: 0.6 mm raised rim, with the arrow rising 1.2 mm so it stands 0.6 mm above the rim. Change filament at that layer to colour only the arrow. Underside: flat, with a 0.6 mm deep arrow indentation turned 90° from the top arrow, plus a 1.4 mm wide, 0.6 mm deep groove about 2 mm in from the edge. Print: lie it flat, underside on the bed, no supports.
Kehlani — Two-Color Name Bag Tag
Kehlani is a two-color name tag for bags, with a raised script name, a border and a string hole. The pink base carries a 1 mm purple layer in Satisfy lettering, and the design has no occasion text, so the tag can be reused all year. Features Raised, centered "Kehlani" name in Satisfy script Raised border with a ring around the string hole 4.5 mm string hole with clearance from the inner border Dimensions 100 × 56 mm, 3 mm thick in total 2 mm base plus a 1 mm raised layer Print notes Pause at 2 mm height and swap filament for the two-color result.
Raised-Text Visitor Pass 110x70 mm
A 110 × 70 mm single-piece visitor pass for Himalaya Public Sr. Sec. School, with a 2 mm base plate and bold text raised 0.8 mm above it. The three centred lines read HIMALAYA PUBLIC, SR. SEC. SCHOOL and VISITOR PASS. Plate: 110 × 70 mm, 2 mm thick, rounded corners, flat bottom Text: 0.8 mm raised, fused to the plate Total thickness: 2.8 mm Single colour, no supports needed Text size unchanged from the previous version