Print-in-Place Articulated Dragon Fidget Toy
Created today
Description
Articulated dragon with a horned head, ten hinged body segments and back spikes. It prints as one piece with no assembly, and the body flexes in a wave when held.
- Joints: pin hinges with 0.4 mm clearance per side, alternating between side-to-side and up-down bending
- Segments: 10, tapering from an 18 mm wide head to a narrow tail
- Size: about 155 mm long, 12 mm tall without spikes
- Print: lay flat, no supports intended for the body; 0.2 mm layers, PLA or PETG
- After printing: bend each joint back and forth to break the hinges free
- Use: desk fidget, sensory toy
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Monolithic Grid Advent Calendar
A complete, print-in-place Advent calendar designed specifically to fit on the Bambu Lab A1 Mini (180x180x180 mm build volume). It features exactly 24 sliding drawers arranged in a space-efficient block, numbering from 1 to 24 sequentially. The top two rows contain 8 larger drawers perfect for bigger treats, while the bottom four rows hold 16 smaller drawers. Print-in-Place Design Ready to Slide: The drawers and frame are printed together as a single unit. Tolerances are tuned (0.4 mm on sides and bottom, 1.0 mm on top) so the bridging above each drawer naturally sags without fusing the parts together. Zero Assembly: No separate rails, glue, or snap-fit parts to mess with. Easy Grip: Each drawer features a neat little half-circle finger notch at the top, making them easy to pull open. Printing Tips No Supports: Do not generate supports, as they will fill the internal gaps and fuse the drawers to the frame. Cooling: Ensure your part cooling fan is running high so the bridges above the drawers stay relatively crisp. Material: Standard PLA works perfectly. White gives it a clean, classic winter look.
Women's Sunglasses Frame with Folding Arms
Printed sunglasses where the parts crowd each other on the plate and fuse: this set lays the frame, two folding arms, ribbon inserts and hinge pins out with clear space between them. Frame width: 145 mm, 50 mm tall, 5 mm plate, hinge ears 18.5 mm high Lens openings: 50 × 36 mm each, 16 mm bridge gap Arms: about 139 mm long, 8 mm wide, 6 mm thick, with at least 4.8 mm between each part on the plate Hinge pins: four, 2 mm across, in 2.4 mm holes Hearts and breast cancer awareness ribbons recessed 1 mm on the frame and arms Print flat, no supports needed for the arms
Schild 200 x 100 x 8 mm Sauerteig
Schild mit zweizeiliger Beschriftung "Natur" und "Sauerteig" und einer Aufhängeöse oben mittig. Platte schwarz, Schrift weiß und erhaben, als ein zusammenhängendes Teil für Mehrfarbdruck. Platte: 200 × 100 × 8 mm, Ecken gerundet Öse: 30 mm Außendurchmesser, 14 mm Loch, Gesamthöhe 120 mm Schrift: 32 mm hoch, 0,6 mm erhaben, 0,2 mm eingelassen Druck: Drucker mit automatischem Filamentwechsel (z. B. AMS), 3MF empfohlen
Magic octagon coin.
An octagon coin whose raised arrow disappears into the bed side: the underside is now flat with the arrow cut in as a shallow dent, so no layer prints over empty air. Size: 50 mm across corners, 3 mm body, 4.2 mm total height. Top: 0.6 mm raised rim, with the arrow rising 1.2 mm so it stands 0.6 mm above the rim. Change filament at that layer to colour only the arrow. Underside: flat, with a 0.6 mm deep arrow indentation turned 90° from the top arrow, plus a 1.4 mm wide, 0.6 mm deep groove about 2 mm in from the edge. Print: lie it flat, underside on the bed, no supports.
Raised-Text Visitor Pass 110x70 mm
A 110 × 70 mm single-piece visitor pass for Himalaya Public Sr. Sec. School, with a 2 mm base plate and bold text raised 0.8 mm above it. The three centred lines read HIMALAYA PUBLIC, SR. SEC. SCHOOL and VISITOR PASS. Plate: 110 × 70 mm, 2 mm thick, rounded corners, flat bottom Text: 0.8 mm raised, fused to the plate Total thickness: 2.8 mm Single colour, no supports needed Text size unchanged from the previous version
Mike Wazowski Horns for Shirt
Two horns to sew onto a maternity shirt for a Mike Wazowski costume. A loose horn flops or slides off fabric, so each one has a flat round base with sewing holes to stitch it down. Key numbers Height: about 47 mm each Base: 40 mm round disc, 3 mm thick Six 3.2 mm sewing holes around each base Print: base flat on the bed, no supports needed, cream or white filament