Description
What it's for
A custom-designed premium novelty card that grants the bearer unlimited access to pizza. Modeled to the footprint of a standard credit card, the design features bold raised lettering on the front and a set of strict engraved terms and conditions on the back.
Dimensions
- Width: 85.6 mm
- Height: 54.0 mm
- Thickness: 1.2 mm base plate (1.8 mm total including embossed text)
Print notes
For best results on the engraved fine print, flip the model so the back faces upwards, or print it flat as-is and rely on a well-calibrated first layer. A filament swap at the 1.2 mm height will make the front text pop against the background.
Images
More like this
Explore more in Keychains & EDC →
Aegis — Symmetrical Barrel Plaque
A precisely dimensioned rectangular charm featuring gently rounded edges and delicate engraved details. Designed to lie perfectly flat while capturing intricate central motifs. Features Dimensions: 38.10 mm × 16.10 mm × 4.57 mm Top-to-Bottom Passage: A clean 3 mm cylindrical tunnel runs completely inside the narrow vertical profile. Surface Art: Features a recessed shield, twin vertical channels, and a soft continuous curved arc near the base.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.
Football Keycap Topper
A custom Cherry MX-compatible mechanical keycap featuring a gently domed top and recessed seams, channeling the look of a classic basketball. Built from the ground up to respect a precise 17.25mm footprint, it trades the standard typing dish for a smooth, tactile convex surface. Court-Ready Specs Switch Profile: Deep Cherry MX compatible stem with a flared entrance for an easy press-fit. Surface Feel: A smooth domed top intersected by 0.6mm-deep recessed channels tracing the iconic hoops cross-and-arc pattern. Dimensions: Exact 17.246 mm square footprint at the base, tapering cleanly up to the rim. Printability: Designed fully manifold with built-in internal bracing ribs. The bottom cross interface is lightly chamfered to combat elephant's foot and ensure tight tolerances straight off the bed.
M22 Threaded Kettlebell Stash
A two-piece threaded kettlebell stash keychain. The main body has been hollowed out to maximize internal storage, then split squarely at the equator with a sturdy 2mm-pitch thread holding the halves together. Both halves print exactly as oriented — the base sits flat on its machined underside, and the top half prints directly on its equator ring. Fitment Notes Thread Clearance: Engineered with a 0.5mm radial offset on the internal thread. Check your flow rate if the halves bind on the first turn. Split Ring: The arch remains standardized for a 1.5mm wire gauge ring. Internal Volume: The cavity is approximately 20mm wide and 19mm deep when closed. Fits standard folded emergency bills or small hardware.
CourtGuard — Vented Finger Splints
Designed to quickly immobilise jammed or sprained fingers, CourtGuard splints provide rigid support without trapping moisture. Ideal for handling the inevitable basketball court impacts, the half-cylinder trough design features a rounded capsule geometry that sits comfortably against the skin without digging in. A dorsal ridge of vent holes keeps the finger cool during recovery, while integrated side notches securely anchor standard Velcro straps to keep the splint exactly where it belongs. Sizes Included Small (Pinky): 55mm length, 15mm inner diameter, 4 vent holes. Medium: 65mm length, 18mm inner diameter, 5 vent holes. Large: 75mm length, 21mm inner diameter, 6 vent holes. Print Notes All three sizes are designed to print-in-place in their current flat orientation, requiring absolutely no supports. A rigid material like PETG or standard PLA is recommended for maximum immobilization.
Closed-Sleeve Glasses Ear Hooks
Straight diagonal ear hooks with a closed, slip-on sleeve design. They act as anchors behind the ear to keep frames from sliding down when looking forward or down. Adjustments for a perfect fit The internal sleeve: Currently set at 2.5mm width and 5.0mm height. This works for most standard wire or thin acetate frames. Thicker plastic frames will need these bumped up. The drop angle: The rear sphere is dropped back and down to catch the ear. You can tweak the position of the tail end to hug a specific ear shape tighter. Material choice: TPU or another flexible filament works best here for grip and comfort, though PLA will work if the friction fit is precise.