Sealed Safety Razor Blade Box
Created 1 months ago
Description
A sealed disposal container designed for storing used double-edge safety razor blades. The one-piece construction safely houses spent blades, featuring a thick upper block that prevents accidental exposure.
The top integrates a precisely angled entry chute that ensures blades drop safely into the chamber and cannot slide back out if the container is inverted or tipped. A front-facing embossed hazard icon and structural lettering permanently label the contents.
Features of this enclosure:
- Sealed print-in-place design requiring zero assembly or external hardware
- 25mm by 1.0mm directed chute sized specifically for standard safety blades
- 35-degree internal gravity ramp to permanently trap contents
- Embossed front hazard iconography and text
Images
More like this
Explore more in Kitchen & Bathroom →
Heavybase Safety Razor Stand
A cantilevered stand designed to hang a safety razor inverted, allowing water to drain down the handle rather than pooling in the blade assembly. The top arm features a flared entry slot so the razor can be docked blindly, and the 75mm conical base provides enough footprint to resist tipping when bumped. Remix Hooks & Clearances Hanger Dimensions: The entry slot is cut at 11.5mm to comfortably clear a standard 10mm razor handle, terminating in a 13.5mm seating hole with a countersunk top to center the razor head. Widen these if adapting the stand for thick-handled cartridge razors. Pillar Height: The 121mm vertical pillar provides roughly 106mm of hanging clearance. Elongate this section if designing for an extra-long handle. Base Mass: The current 75mm diameter by 15mm thick base is stable on its own, but slicing with dense infill or pausing the print to embed steel weights will lock it down even further.
Compact Razor Blade Bank
A compact, two-part disposal bank for spent safety razor blades. The footprint is minimized to fit standard double-edge blades exactly, taking up minimal counter or drawer space. Overall dimensions: 55x30x25mm Slot size: 45x2.5mm Clearance: 0.2mm tolerance on the flush-fitting lid Assembly: Print both parts flat on the bed; the lid plugs directly into the base
Pepper Grinder Funnel
A custom-fit funnel designed specifically for filling pepper grinders without spilling. The spout is sized at 29mm to comfortably clear a 31mm fill hole, while the wide bowl catches everything you pour in. Features: Steep Bowl Angle: Designed so whole peppercorns slide down easily without jamming. Wide Spout: The 25mm internal diameter allows large peppercorns to pass freely. Compact Height: Kept to 58mm overall, fitting easily into crowded kitchen drawers. Support-Free: The overhang angle allows it to print cleanly without supports in either orientation (though printing it upside-down on the wide bowl is recommended for bed adhesion).
12mm Schranktür Handtuchhalter
Ein robuster Handtuchhalter, der exakt über eine 12mm starke Schranktür greift. Konstruiert als flach liegendes Profil, um die Schichten entlang der Belastungsrichtung zu orientieren – das verhindert ein Brechen unter Gewicht. Ansatzpunkte für eigene Anpassungen Das Design ist bewusst simpel gehalten, um es schnell an andere Gegebenheiten anpassen zu können: Die Türstärke (12mm): Ist der Kern der Konstruktion. Aktuell sind 0.6mm Luft (Clearance) eingerechnet, damit der Halter gut aufgesteckt werden kann, ohne den Lack der Tür zu zerkratzen. Die Haken-Ausladung (22mm): Ausreichend für ein gefaltetes Handtuch oder einen Waschlappen. Wer dicke Badetücher aufhängen will, kann diesen Wert problemlos erhöhen. Die Breite (25mm): Gibt dem Halter Stabilität gegen seitliches Verrutschen auf der Türkante. Lässt sich ohne Stützstruktur drucken. Ideal für Küche oder Bad.
Magnetic Deep J Towel Hook
What it's for A robust, support-free hook designed to secure loose kitchen linens to magnetic surfaces. The deep J-curve profile physically captures the fabric, preventing tea towels from sliding off when a refrigerator door is violently swung open or shut. The rear mounting face incorporates a carefully modelled recess to house a standard neodymium disc magnet flush with the surface. Dimensions Overall Width: 28mm to distribute pressure broadly across modern linen weaves. Magnet Recess: 20.2mm in diameter and 5.2mm deep, sized for a standard 20x5mm disc magnet with a drop-in glue fit. Wall Backing: Exactly 1.0mm of solid structural material buffers the magnet from the hook's main interior. Remix ideas Modify the cylindrical recess diameter and depth parameters to suit different magnet stock. Extend the J-curve's front upright lip by 15–20mm to confidently retain thicker items like padded oven mitts. Adjust the overall linear extrusion width down to 10mm if mounting on a very narrow appliance bezel.
5-Point Star Cookie Cutter
A 60mm five-point star cookie cutter designed for clean slicing and comfortable use. The cutter incorporates a wide top lip to distribute pressure across the thumb or palm, preventing discomfort during repeated use on dense dough. The model is oriented flange-down by default to allow the entire piece to print seamlessly without supports. 60mm overall diameter span 18mm cutting height accommodates thicker doughs and fondant 4mm-wide comfort flange protects hands during downward pressure 1mm cutting wall thickness for defined edges