Slotted Square Post Soap Dish
Created today
Description
A rectangular soap dish engineered to prevent bar soap from dissolving prematurely. The design features a raised grid of posts and integrated drainage slots to ensure constant air circulation and immediate water runoff.
What it's for
- Elevates bar soap to keep it dry between uses.
- Prevents soap from turning into mush by mid-week.
- Provides unimpeded drainage through base slots.
Dimensions
- Overall size: 114 mm × 78 mm × 15 mm.
- Support posts: 5 mm square, 8 mm tall.
- Grid spacing: 12 mm pitch.
- Drainage slots: 4 mm wide, running parallel between post columns.
Remix ideas
- Scale the footprint to accommodate oversized artisan soap bars.
- Adjust the wall height to create a deeper basin or a flatter tray.
- Change the base thickness to fit specific sink ledges or ridges.
Images
More like this
Explore more in Kitchen & Bathroom →
Minimal Toothbrush Neck Rest
A minimal counter stand built to support the necks of two standard manual toothbrushes, preventing handles from rolling and keeping bristles facing up. Features two 18mm cutouts with curved cradles Low-profile 12mm vertical height with a slim 3mm connecting base Relies on the base of the toothbrushes resting directly on the countertop Ideal for manual brushes (not dimensioned for thick electric handles)
Ice Cream Pint Cozy
What it's for A rigid, insulated sleeve designed specifically for standard 16oz (473ml) ice cream pints. The thick tapered walls keep the heat of your hands away from the carton, slowing down the melt and stopping condensation from freezing your fingers. Includes a large bottom hole to prevent suction when inserting the pint and to make it easy to push out when you're done. Dimensions Height: 75 mm (leaves the top of the pint exposed for comfortable eating) Inner Diameter: Tapers from 74 mm at the base to 93 mm at the lip Wall Thickness: 3.5 mm Print notes No supports required. Prints easily in its default upright orientation. TPU can be used if you want a flexible, extra-grippy sleeve, but PLA or PETG works perfectly for a rigid holder.
Pizza Angel Cookie Cutter
The worst part about custom cookie cutters is the razor-thin top edge that digs straight into your palms when you press down on cold dough. This cutter stamps out the silhouette of a flying baby angel holding a pizza slice, but more importantly, it includes a wide, flat rim so you can actually use it without bruising your hands. Cutter Dimensions Overall Size: Roughly 80mm wide. Flange: 4.5mm wide base for pressing. Wall Height: 15mm total depth for thick dough. Cutting Edge: Tapers to a sharp 0.6mm at the top. Print this upside down (flange flat on the bed) in PETG or another food-safe material. No supports needed.
Paper Towel Core Stabilizer Cap
A tapered palm-rest cap designed to drop into the top of a standard kitchen roll. It provides a wide, smooth surface for your hand to press down on while tearing off a sheet, stabilizing the unit without pinching the paper towel itself. The tapered body ensures a loose spinning fit inside standard cardboard cores, while the hollow interior clears the paper towel holder's central upright. Fitment Measurements Cardboard Core Insert: Tapers from 41.5mm at the top down to 36mm at the base. Upright Clearance Bore: 32mm internal diameter. Palm Rest: 80mm wide. If your printed upright is wider than 32mm in diameter, the internal bore will need to be expanded to fit.
95mm Topographic Map Coaster Set
A four-piece set of 95mm square coasters that arrange into a single continuous topographic map. Intended as a functional housewarming gift, each piece features recessed grooves along the contour perimeters to capture condensation and prevent runoff. Dimensions: 95mm × 95mm × 8mm per coaster (190mm × 190mm assembled footprint). Contour Geometry: 2mm vertical steps with 1.5mm recessed drip-catch grooves. Base Features: Underside grid pattern provides grip and prevents surface sliding. Spill Containment: Raised perimeter rim captures pooled liquid.
Wide Seashell Glass Tray
What it's for A wide, scalloped catchall tray styled after a seashell. Scaled up specifically to act as a coaster or serving base for two standard drinking glasses. Features a flat base with a prominently flared, rippled rim. Dimensions Base Width: ~210 mm Top Flared Width: ~280 mm Height: 25 mm Wall Thickness: 4 mm Print notes Print flat on its base. No supports are required. A rigid material like PETG or PLA is recommended.