Square Chipmunk Cup
Created 3 months ago
Description
A square cup that features a raised, chubby-cheeked chipmunk face on the front panel. It works well as a pen cup on a desk or a casual holder around the house.
- Size: 80mm square by 90mm tall.
- Construction: 3mm wall thickness with rounded vertical corners for printability and cleaning.
- Details: Includes embossed cheeks, front teeth, nose, and gently recessed pupils.
Images
More like this
Explore more in Kitchen & Bathroom →
22.5mm Shower Bracket Cup
A hard replacement cup for a hand shower bracket, designed to replace perished or missing rubber inserts. It accepts the standard ball end of a shower fitting directly, using integrated internal ribs to hold the head securely through friction. 22.5mm inner diameter and 30mm internal depth to accommodate standard ball ends. Four internal vertical ribs provide grip without requiring a rubber liner. 5.5mm countersunk mounting hole in the base for standard bracket arm attachment. Heavy 3mm outer wall thickness for durability under repeated load.
Portavasos Geométrico Pilas Baby
Portavasos de escritorio con texto en bajorrelieve. Diseño de 12 lados (dodecágono) para un aspecto más geométrico y moderno, con espacio central para contener la condensación. Diámetro exterior: 90 mm Zona interior de apoyo: 82 mm Altura total: 4.5 mm Texto: "PILAS BABY" dividido en dos líneas.
Galaxy Cap & Pets
A standalone pop-top can cover designed for easy swapping of customizable 3D-printable pets. Hooks for Remixing The Peg System: The mounting peg on the cap is a standard 3.8 mm cylinder, sitting slightly toward the back edge. Any custom object with a matching 4.2 mm socket will drop right on. Skull Profile: The flat skull on the cap is an exact scaled-down copy of the original 3D geometry. Expansion: Want to add more utility? You could stretch the cap base horizontally to house three or four pets simultaneously, or angle the peg so the figure faces upward when the can is open.
Components view 1st
A touchless smart tap automation enclosure designed to sit directly onto a 15–24 mm tap throat. This is the fully assembled internal view of the water and power management systems. The IP65-style base box drops over the E18-D80NK IR proximity sensor up front and houses native standoffs for standard 50×40 mm and 35×25 mm logic boards. Fitment Checklist Throat: Clamps over 15–24 mm circular taps Sensor Bore: Front-facing 18 mm drop-in for cylindrical IR sensors Tubing: Routing pathways built strictly for 6 mm OD / 4 mm ID polyurethane lines Valve Clearance: Central bay fits standard inline 1/4" 12V DC solenoids
Stepped Makeup Organizer With Tilting Mirror test 1
A multi-tier storage organizer designed for makeup, cosmetics, and brushes. It features a stepped compartment layout, dedicated grid slots for lipsticks, and hinged lids with simple opening tabs to keep stored items dust-free. The back incorporates mortise slots that accept two upright supports. These supports hold a tilting mirror frame designed to accept a standard acrylic or real mirror sheet. Assembly Notes The parts are laid out flat on the build plate for support-free FDM printing. Uses modular drop-in supports to mount the mirror frame. The main body features integrated hinge knuckles; the lids attach using the included printable pivot pins. Clearances are set to 0.4 mm for smooth hinge rotation directly off the printer.
Sink Caddy With Drain Slots
Sponges and brushes left in a flat tray sit in a puddle and go sour. This sink caddy lifts them on ribs over a slotted floor so water runs out, and a separate tall holder takes a brush upright. Key numbers Tray: 200 x 110 x 45 mm, 2.4 mm walls Floor: 2.5 mm with 9 drain slots, plus 4 mm ribs to keep items off the surface Front notch: 60 mm wide, lets water pour off the front edge Brush socket: 48 mm square, inner opening 44 mm Removable holder: 40 x 40 x 100 mm with side slots for drainage; 2 mm clearance in the socket Printing Print the tray flat, no supports Print the holder upright 0.2 mm layers, PETG suggested for wet use