3D-printable decor & display pieces
Lithophane shades, planters, trophies, wall art and display models. Browse what makers built, or describe the exact piece you want and Printy makes it.
Need one that fits your exact measurements? Start building →
Newest
150mm Layered Sailboat Emblem
A stylized, multi-layered 3D sailboat emblem built from crisp geometric sweeps. The design sets a long, sweeping hull against towering, detached triangular sails, with the entire structure sitting atop three separated, flowing wave ridges. Features stepped heights across the elements to create a sharp depth effect, completely flat on the back for easy mounting or wall display. Print Guidelines Orientation: Print flat on its back. Supports: None required (fully chamfered/beveled surfaces). Clearances: The waves and sails feature distinct gaps built directly into the geometry.
Reeded Table Lamp
A modern reeded table lamp designed to stand independently on a desk, nightstand, or cabinet. The design has been re-proportioned to be shorter and wider, offering a grounded, substantial look. Customization & Assembly Main Shade: Measures 130mm tall and 140mm wide, heavily textured with vertical reeds. It simply slides over the base lip. Base Stand: Sits flat on the table with a 25mm height. It features a standard 42mm hole for an E27 socket and a discreet bottom channel for cable routing. Top Diffuser: A drop-in cap that hides the bulb and softens the upward light. All three pieces are designed to be printed easily without supports. The modular drop-in fit makes swapping bulbs or modifying the shade's color later straightforward.
250mm SnowGoobers Relief Plaque 7
A 250mm display plaque featuring extruded "SnowGoobers Inc." text and an integrated 3D relief of a low-poly snowboarder performing a boardslide. Built as a single-piece extrusion. Fitment Notes Overall Width: 250mm standard base plate. Clearance: Check Z-height clearance; the rider and rail extend up to 47mm off the plate. Mounting: Flat back surface suitable for adhesive strips or drilling custom mount holes. No pre-tapped bores are included.
Wired Coffee Sign Assembly
This is a complete projecting storefront sign assembly, built with physical raised lettering on both faces and a classic diagonal-brace wall bracket. The details project 2mm from the flat base panel on each side, allowing the coffee bean logo and text to catch the light nicely while keeping print layers straightforward. Remix Hooks This is a standard display rig designed for easy adaptation: The Panel: Sized at a tidy 100x120mm with a 6mm core. You can drop in any custom perimeter or shape as long as you keep the 60mm hole spacing on the tabs. The Branding: The "WIRED COFFEE" text and center bean logo sit cleanly on the outer surfaces. Swap the sign_text() module for your own typography or logo mark. The Bracket: The arm extends 140mm from the wall. The backplate spans 120mm in height. If you need it for a much heavier outdoor print, I'd suggest beefing up the wall plate thickness and swapping the printed C-clips for metal S-hooks. Printing: The panel and details are split by colour in the file. To run this flat on an FDM bed without supports, you'll want to slice the panel straight down the middle (along the X-Z plane) into two identical 3mm-thick halves, print them face-up, and glue them back-to-back.
Ivory Folded Ceramic Vases
A trio of statement centerpiece vases designed with deep organic grooves, sweeping necks, and soft ivory tones. Each piece balances a minimalist ceramic aesthetic with flowing, fabric-like curves, ready to print as functional tabletop decor. Low Spiral Vase: A wide, dramatic base that twists upward through 140 degrees into a slightly offset neck. Tall Wavy Vase: The anchor of the set, standing 210 mm tall with crisp vertical ribs and a gentle 45-degree rotation. Asymmetric Curved Vase: A sweeping swan-like profile that leans dynamically off-center with a reverse twist. Print Notes: Designed to be printed in standard FDM standard mode (hollowed out with 2.5 mm walls, rather than vase mode) for maximum rigidity and heft. No supports required. Ensure your print bed is well leveled to anchor the large flat bases securely.
Wypukły Emblemat Bollier
Co to jest Wypukły emblemat z logotypem, zaprojektowany jako trójwymiarowa "soczewka". Wymiary Średnica: 120 mm Budowa: Płaska podstawa 2 mm, na której spoczywa łukowate tło. Napis idealnie naśladuje krzywiznę tła, wystając równomiernie na 0,5 mm. Kolory: Przystosowane do zmiany filamentu na warstwie (czarna baza, białe detale). Uwagi do druku Wydrukuj płasko na stole. Przewidź zmianę filamentu w momencie przejścia z wypukłego tła na wyższe warstwy tekstu i ramki. Ze względu na gładkie łuki przyda się mniejsza wysokość warstwy.
Desk Surface - 90mm Dystopian Earth
A 90mm spherical diorama of a ruined Earth. It features a solid core representing polluted oceans, overlaid with fractured landmasses. Scale: 90mm globe diameter, expanding to roughly 145mm across the outer cloud belt. Structural Details: The storm cloud ring is permanently anchored to the surface via six heavy industrial smoke stacks, ensuring no floating geometry. Fitment: The South Pole incorporates a 50mm flat base to sit completely flush against a printer bed or display shelf without rolling. Surface Layout: Continents are heavily fissured, revealing the core layer beneath. Scattered city blocks feature leaning towers and bridge structures. Requires no supports if your printer handles heavy bridging well, though the outer cloud ring overhangs may benefit from minimal scaffolding.
Freestanding Letter Block
A freestanding typography block reading RUHR POTTER, fused into a single printable piece. Letter Overlap: Kerning is compressed (spacing=0.82) and lines are brought together to ensure the text forms one contiguous solid body. Thickness: 4 mm deep, offering enough stability to stand on a desk or mount directly to a wall. Font: Bebas Neue, which naturally suits tight tracking.
Barad-dûr — Smart Ring Tower
A dark, armored ring holder inspired by the spiked aesthetics of fantasy crowns, designed to securely hold rings from US sizes 6 to 14. Features Tapered Spire: The main column tapers gradually to accommodate a wide range of ring sizes, catching small rings at the top and larger rings toward the base. Internal Sensor Channels: Features two hidden 5mm channels running up the length of the front and right tips, stopping just 0.4mm short of the surface, allowing for concealed sensors. Textured Base: The base flares out dramatically with horizontal armor grooves for stability and style.
Verdenstro Spillebrikker
Et sæt af fem klassiske spillebrikker designet til brætspil i religionsundervisningen. Hver brik bærer et tydeligt taktilt symbol på den flade top, der repræsenterer en stor verdensreligion eller livssyn. Sættet indeholder: Kristendom: Det kristne kors Jødedom: Davidsstjernen Islam: Halvmånen og stjernen Buddhisme: Livshjulet (Dharmachakra) Ateisme: Et "A" omkranset af en cirkel Brikkerne har en bunddiameter på 24 mm og står solidt på de fleste spilleplader. Symbolerne er hævet 0,8 mm, hvilket gør dem lette at aflæse med fingrene under spillet.
Comic Speech Bubble Plaque - Java Devil
A two-color graphic novel speech bubble plaque with raised border and text, ready for a mid-print filament swap. Remix Hooks Base Dimensions: Currently 110mm x 70mm, plus the tail. You can adjust the bubblewidth, bubbleheight, and corner_radius to frame shorter or longer quotes. Text Profile: Size 14 Bangers font, extruded to 4mm total height (2mm base + 2mm text). Swaps: Designed to print the base in one color (e.g., white) and swap at Z=2.2mm for a high-contrast border and text (e.g., black).
Comic Quote Bubble Plaque - The Tick
A comic-book style speech bubble plaque featuring a classic dramatic quote. The raised text and border are designed for a mid-print filament swap to make the lettering pop. What it's for Wall art or a desk display for coffee enthusiasts with a flair for the dramatic. The flat back allows for easy mounting with adhesive strips. Dimensions Width: 260 mm Height: 155 mm (including the tail) Depth: 5 mm total (3 mm base, 2 mm raised lettering) Print notes Print flat on the build plate. Schedule a manual pause or M600 filament swap at the 3 mm height to print the text and border in a contrasting color.
170mm Western Plaque
A 170mm pill-shaped wooden-style plaque featuring custom text and decorative stars. Designed to sit flat against a wall or shelf. Size: 170 mm × 100 mm × 8.5 mm. Features: Deep plank grooves running horizontally across the back plate. Font: Alfa Slab One, bracketed by twin five-point stars. Mounting: Flat back, suitable for command strips or leaning.
Cinematic Webbed Face Shell
A cinematic-style face shell featuring aggressive eye frames and a full raised webbing pattern across the surface. The webbing radiates from the bridge of the nose for that classic screen-accurate look. Webbing: 1.5 mm raised lines, intersecting in a radial pattern. Frames: 4 mm thick, stepped out slightly past the webs. Scale: Sized generally for display, but the scaling parameters in the shell module are the ones to tweak if you're trying to match it to a specific bust or head form.
tapbay pillar stand
A tabletop pillar sign featuring vertically stacked text protruding prominently from the front and back faces. Vertical text layout: Letters run top to bottom down a straight central post. Double-sided: Readable from both the front and back faces. Heavy embossing: Text extrudes outwards for a bold, dimensional look. Stable base: A low-profile chamfered circular base keeps the pillar steady.

Weathered Scimitar Display Prop
What it's for A desk-sized display piece featuring a heavy scimitar curve, weathered blade damage, and an intricate pommel. Dimensions Overall Length: ~245 mm Blade Thickness: 5 mm at the spine Grip Length: 50 mm Print notes Symmetrical design. If printing on a standard FDM setup, sink it down the Z-axis by 9 mm in your slicer to produce a flat-backed version that prints perfectly with no supports.
Ancient Temple Reptile Hide
A geometric, floorless hideout designed for small reptiles, shaped like an ancient stepped pyramid. It features two arched entryways to prevent the animal from feeling cornered and a built-in side altar that holds a perfectly fitted, drop-in water dish. The tiered shape isn't just aesthetic—it prints cleanly without any supports, and gives climbing species a textured surface to explore. Every exposed edge inside and out is lightly rounded to keep delicate scales safe, and the custom water bowl has a smoothed interior so you can wipe it out easily. Remixing and Sizing This design is built for standard enclosures and easy FDM printing, but scales predictably if you need to adjust it: Total Footprint: 210mm wide (including the altar) by 150mm deep, hitting right around the 8-inch mark. Hide Interior: Roughly 152mm x 142mm at the base, stepping inwards. Entrances: 45mm wide and 40mm tall—ideal for leopard geckos, smaller snakes, or juvenile beardies. Scale the whole model up uniformly if you have a larger animal. Water Bowl: 73mm diameter, holding about 70ml. If you lose it, the recess on the temple is exactly 75mm wide and 20mm deep, which easily fits a standard small deli cup or bottle cap depending on your scale.
Hovering Desk Light Cycle
Desk objects that tip backward are an instant nuisance. This Light Cycle runs a flat-bottomed low-slung chassis, putting the center of gravity where it belongs and dropping the nose so it plants firmly on a shelf or desk. Print details Dimensions: 26mm x 285mm x 53mm Clearance: Prints fully flat against the bed Assembly: Designed as a single plate print; uses regions to let you multi-color print the light ribbons and canopy in a slicer.
Light Cycle and Stabilizer Trail
A desk-friendly display model of a light cycle. The flat-bottomed hubs keep it planted, and an integrated light trail extends off the rear to serve as a 100mm stabilizer stand so it won't tip over. Fit & Print Details Dimensions: 170 mm total length, 21 mm wide at the wheels, 46 mm high at the canopy. Details: Deep vertical louvers and geometric cutouts along the side fairings break up the flat surface for better display lighting. Printing: The flat base elements mean this sits directly on the build plate. The trail serves as a built-in balance prop.
RÖDALM — Beveled iPad Mount
Transform an IKEA RÖDALM picture frame into a flush, wall-mounted iPad display. This two-part adapter replaces the stock mat and securely holds a 5th-generation iPad without rattling. The front face features a deep 22mm chamfer that drops precisely down to the active screen area, giving it a premium gallery look. The entire assembly sits on your printer's bed face-down and prints support-free. Features Support-Free Design: The steep internal bevel means you can print this flat without supports, resulting in a pristine front face. Puzzle Lock: The two halves snap together at the centerline with extruded puzzle joints, aligning the faces perfectly. Continuous Power: An oversized bottom channel allows standard and right-angle Lightning cables to plug in and drop straight out the back, perfect for permanent wall mounting. Accessible: Dedicated cutouts for the home button, front camera, speakers, and side buttons. Cooling: Integrated back channels ensure passive airflow around the device. Print Notes Print face-down (the flat front face touching the build plate). No supports needed. Designed to comfortably fit on standard 220 × 220 mm beds.

Rinsler — Desk Light Cycle
A stylized desk display piece inspired by vintage sci-fi light cycles. This version features an aggressive front cowl, chevron-sliced side fairings, and a solid neon light stream trailing out from the rear tire. Features Flat Stance: The underside of the chassis and tires are sliced at Z=1.5mm to sit perfectly flush against the build plate without needing supports underneath. Hubless Silhouette: Deep-set, open-core wheels echo classic sci-fi rims. Integrated Stream: The solid light trail serves as both a visual anchor and extra balance for the model. Print Notes Two-color capability recommended to separate the chassis elements from the neon glows and trail. The "Rinsler" stamp is small and obscure — orient the part to catch good cooling, or use a smaller nozzle if you want to hold the fine edges on the lettering.

Sci-Fi Identity Disc
A 3D-printable replica of a classic sci-fi identity disc, segmented into distinct parts for multi-colour printing or assembly. What it's for Designed as a cosplay prop or a display piece, this disc features an ergonomic grip core and recessed channels that can be printed in contrasting materials to simulate data rings. Dimensions Overall Diameter: 200 mm Thickness: 14 mm Grip Core Inner Diameter: 85 mm Print notes The model is broken into three distinct colour zones (Outer Blade, Inner Core, and Data Rings). For single-extruder setups, you can separate the regions in your slicer to print them individually and assemble them later.

Segmented Identity Disc
What it's for A multi-part Identity Disc designed for cosplay, display, or assembly. The main chassis features a continuously tapering mathematically generated sweep, thickest in the middle and curving smoothly down to the outer edge. The inner and outer energy rings are segmented and engineered as separate parts with a 0.3 mm clearance, allowing them to be printed in translucent filaments or contrasting colours before snapping perfectly into the chassis. Dimensions Overall Diameter: 200 mm Center Hole Diameter: 60 mm Max Thickness: 14 mm (at the inner ridge) Print notes Clearances: The energy rings are modeled at nominal dimensions, while the base body channels are cut with a baked-in 0.3 mm offset to ensure a snug fit off an FDM printer. Orientation: Print all parts flat on the bed. No supports should be strictly necessary for the main body if your printer handles shallow overhangs reasonably well.
Kläusfang — Heritage POI Plaque
The Kläusfang plaque brings a sense of history and permanence to any point of interest. Designed with classic proportions, a raised rim, and elegant Marcellus typography, it serves as a stately marker for libraries, historical spots, or personal spaces. Features Heritage Typography: Raised Marcellus lettering for a traditional, cast-metal aesthetic. Integrated Mounting: Two horizontal 5.5mm boreholes spaced 156mm apart for secure wall installation. Two-Tone Ready: The base and raised elements are separated by height, making layer-based color changes effortless on a standard single-extruder machine.
Need a part that doesn't exist yet?
Start building →