3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
27mm TWS Earbud Shell
A True Wireless Stereo (TWS) earbud enclosure tailored for custom internals. The main exterior plate commands an exact 27 mm footprint, housing a domed chassis ergonomically tapered toward the ear canal. The structure includes exact hollows for: A Ø13 × 3 mm PCB A 401012 battery (4 × 10 × 12 mm) An 11.5 mm acoustic speaker The angled acoustic nozzle features a locking lip, allowing the included silicone ear tip to snap securely into place while remaining fully removable.
Wall-Mount Paper Towel Brackets
A two-piece mounting bracket system designed to hold standard 11-inch (280mm) paper towel rolls. The split design allows you to install it under cabinets or flat against a wall at whatever width fits your specific brand of towels, while the oversized hubs keep the roll spinning freely without dropping. Specifications Clearance: Designed with a 95mm reach to clear standard and jumbo rolls. Hub Size: 34mm core with a 39mm chamfered retaining lip. Mounting: Two counterbored screw holes per bracket (fits #8 or 4-5mm wood/drywall screws). Printing: Both brackets are designed to print without supports when laid flat on their outer sides.
TWS Clamshell Enclosure
A hardshell housing for True Wireless Stereo (TWS) electronics, featuring a robust clamshell design. The base is sized exactly to the requested 52 × 48 × 24 mm footprint, finished with heavy corner rounding for pocketability and a recessed alignment lip for a clean seal. 1.8mm Hinge Channel: Sized to accept standard 1.75mm filament as a press-fit hinge pin. USB-C Port: Centred rear cutout ready for charging board alignment. Print-ready Orientation: The lid and body are separated and sit flush on the build plate for support-free printing.
EVTOL02
A 320mm scaled eVTOL concept featuring a streamlined monocoque aesthetic, four outboard motor nacelles, and a physical interior. This revision maintains the exact outer aerodynamic envelope of the X2 configuration while updating internal layout and ground stance. Canopy: Integrated functional rear-hinged canopy with structural knuckles and clearance for an M5 or wire pin. Mechanics: Internal recessed bay behind the cockpit for a micro servo or linkage. Stance: Four minimal 8mm landing pads keep the belly off the deck. Pods: Nacelle motor cavities shortened by 50% for a cleaner profile while still allowing cable routing through the booms.
Samsung S24 Case Blank (ITAY)
Standard phone case blank featuring a custom typography deboss on the rear face. Fits: Standard modern handset blank (currently S24 dimensions) Customization: "ITAY" carved 1.2mm deep into the back plate using Pacifico script Orientation: Text is mirrored in the design file so it reads correctly when viewing the outside back of the printed case. Check your specific handset dimensions before printing, as this uses a baseline placeholder footprint.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.
Compact Hex Key Pouch
A compact, low-profile pouch for a standard set of seven metric Allen keys (2 mm through 8 mm). Designed for belt or pocket carry, the main body is slimmed down and heavily rounded to prevent it from catching on clothing or digging in while working. The holes run completely through the block so sawdust and metal shavings cannot collect inside. What it's for Keeps your hex keys organized and immediately accessible on a belt or work apron. The integrated spring clip features a tightly radiused catch designed to grip fabric securely without feeling bulky. Dimensions Overall footprint: 68 × 16 mm (body), plus 6.5 mm depth for the clip. Height: 50 mm. Hole diameters: 8.5, 6.5, 5.5, 4.5, 3.5, 3.0, and 2.5 mm, providing a comfortable 0.5 mm clearance for each key. Print notes Print upright as oriented (the flat base on the bed). The through-holes require no supports, and the integrated clip relies on the Z-axis layer strength — PETG or ABS is highly recommended for the flex and durability of the clip, though PLA works for lighter duty.
Embossed Corporate Logo Keychain
A minimalist, single-piece keychain blank featuring raised corporate typography. The body uses a flat-bottomed pill geometry to print seamlessly on an FDM bed without supports, while the integrated mounting hole ensures the outer perimeter remains completely uninterrupted. Print Specifications: Dimensions: 65 mm × 32 mm × 4.2 mm (total height including text). Mounting interface: 5.5 mm diameter integrated hole, positioned for 4 mm of solid wall thickness to resist torsion. Lettering clearance: Text is extruded 1.2 mm above the base layer, providing enough depth for a mid-print filament swap if high-contrast text is desired. Material guidance: Prints cleanly in PETG or PLA. No brim required.
Kläusfang — Heritage POI Plaque
The Kläusfang plaque brings a sense of history and permanence to any point of interest. Designed with classic proportions, a raised rim, and elegant Marcellus typography, it serves as a stately marker for libraries, historical spots, or personal spaces. Features Heritage Typography: Raised Marcellus lettering for a traditional, cast-metal aesthetic. Integrated Mounting: Two horizontal 5.5mm boreholes spaced 156mm apart for secure wall installation. Two-Tone Ready: The base and raised elements are separated by height, making layer-based color changes effortless on a standard single-extruder machine.
Harmonica Acoustic Silencer
A two-piece, snap-fit acoustic silencer for a standard 10-hole diatonic harmonica (like the Fender Blues Deluxe). Features a continuous lip opening for unrestricted playing across all 10 holes. Integrated three-chamber acoustic labyrinth forces exhaust air and sound through a tortuous path, reducing volume while maintaining airflow. Internal cavity includes space for 4mm acoustic foam (to be added manually). 6-point integrated snap-fit and alignment pin system requires no extra hardware. Print both halves flat on the build plate. No supports should be strictly necessary for the main geometry.
Piaggio Yamaha Demon Keychain
A solid-block Piaggio and Yamaha crossover keychain. The tuning fork emblem takes the center, flanked by sunken demon faces tucked neatly inside the primary shield perimeter. Overall footprint: Scales out to 40mm wide by 60mm tall. Key ring bore: Roughly 4.4mm internal diameter on the revised scale. Fitment note: Verify your split-ring gauge against the bore before committing to the plate. Prints dead flat.
OO Scale Georgian Townhouse Facade
What it's for A classic Georgian-style townhouse facade designed for OO scale (4mm to 1 foot) model railway backdrops. The model is presented as a flat-pack kit. The main facade features deeply cut ashlar grooving on the ground floor, classic protruding quoins along both edges, and a prominent cornice. To make painting easier, the door and windows are provided as separate, drop-in pieces. Each window features 6-over-6 pane glazing bars, a sturdy lintel, and a sill. The door has six traditional panels and a distinctive triangular pediment. Small 1mm locator blocks on the back of each insert ensure they sit perfectly centered in the facade holes while hiding the seams. Shallow side walls and a roof cap are included to give the facade structure and depth. Dimensions Scale: OO (1:76.2) Facade: 80mm wide by 130mm high Side Walls: 20mm deep Door Opening: 12mm x 28mm Windows: Five large inserts for the ground and first floors; three slightly shorter inserts for the second floor. Assembly Everything prints flat on the bed. Once painted, slide the windows and door into their respective holes in the main facade — the oversized outer frames will overlap the cutouts for a flawless finish. The side walls can be glued flush to the back edges of the facade, and the flat roof slots securely between them.
Acoustic Labyrinth Harmonica Silencer
A custom-engineered, fully playable acoustic enclosure designed for the Fender Blues Deluxe 10-hole diatonic harmonica. This silencer creates a miniature acoustic labyrinth directly behind the harmonica while leaving the entire metal mouthpiece exposed through a smooth, continuous lip opening. You can play normally—including bends and fast sweeps—without any rigid plastic interfering with your embouchure. Acoustic Architecture Direct Lip Access: A 94x9mm heavily rounded opening lets you play directly on the harmonica's surface. Three-Chamber Labyrinth: Sound exiting the back of the harmonica is forced through a tortuous path (Chamber 1 → 90° split → Chamber 2 → Chamber 3) before reaching the external exhaust vents. Foam-Ready: Generous internal tolerances (up to 4mm) on the back wall and first baffle allow for the manual installation of standard acoustic foam. Vibration Isolation: The harmonica is held precisely in place by six tiny internal ribs with a calibrated 0.4mm clearance, eliminating rattle without clamping the instrument. Tool-Free Assembly: Six internal cantilever snap-fits lock the top and bottom shells securely together and can be separated by hand.
M18 Battery Mount
A wall- or bench-mountable receiver designed to hold a Milwaukee M18 battery. The block features an internal track that matches the battery's rails, allowing it to slide into place securely. Interface: Female slide-track (receives the battery) Mounting: 4x countersunk holes sized for #8 or #10 screws Orientation: Includes an internal stop at the back so the battery rests securely when mounted vertically
Acoustic Harmonica Silencer Enclosure
A custom-designed acoustic enclosure built to fit a standard 10-hole diatonic harmonica (specifically dimensioned for the Fender Blues Deluxe). This silencer is built to drop external volume during practice while preserving a totally natural playing feel. The enclosure features a wide front opening that allows direct lip contact with the harmonica body, avoiding any forced embouchure changes. The rear of the enclosure acts as a miniature acoustic labyrinth, forcing outgoing air through staggered baffles and multi-chamber pathways to break up sound waves before they exit the exhaust ports. Remixing and Assembly Clearances: The default harmonica cavity includes a 0.4mm clearance, with 4mm of allocated depth at the rear for installing your own acoustic foam. Two-Piece Shell: The model splits into a top and bottom shell, joined by integrated friction-fit alignment pins. Print Settings: Prints completely support-free when the large flat mating surfaces are placed face-down on the build plate. PLA or PETG recommended for rigidity and snap-fit durability.
Harmonica Acoustic Labyrinth Muffler
A parametric, two-part acoustic enclosure built to mute a 10-hole harmonica without changing how it plays. The design features an unobstructed front opening so your embouchure stays natural, and routes the exhaust air through a rear labyrinth of baffles. The enclosure leaves a dedicated internal gap for you to line with acoustic foam before snapping the halves together. Remix Hooks Harmonica Dimensions: Base sizes are set to 100×27×20mm, but easily tweaked for other harps. Lip Opening: Currently 94×9mm. Widen it if it restricts your airflow, shrink it if you want maximum suppression. Foam Gap: Set to 4mm by default. Adjust this based on the specific acoustic material you plan to insert. Labyrinth Depth: The rear exhaust baffles can be extended if you have room for a larger overall footprint.
Custom Mechanical Keycap
A custom mechanical keyboard keycap designed to fit standard Cherry MX style switches. It features a hollowed shell with a reinforced stem cylinder, and bold, raised lettering on the top face for a satisfying tactile feel. Switch Type: Cherry MX compatible (cross stem) Profile: Standard OEM-style taper Features: Raised typography and a chamfered stem lead-in for easy fitting
90mm FPC-Compatible Earcup Cover
A customized 90mm circular earcup plate designed specifically to mount FPC touch sensors. The inner face features a perfectly cylindrical curve along the X-axis, ensuring the flexible printed circuit can adhere flatly without complex buckling or creasing, while the outer face remains distinctly convex. Overall Diameter: 90mm Center Thickness: 3mm Edge Thickness: 1mm (resulting in a 2mm taper along the Y-axis) Internal Cavity Drop: 3mm cylindrical sweep
Friends Forever Crown Board
What it's for A custom wall-hanging message board for two friends, Amit and Itay. It features dual-language text at the top ("חברים לנצח" and "FRIENDS FOREVER") and their names at the bottom, separated by a custom three-point crown motif. The centre is left wide open to be used as a dry-erase surface or note space. Dimensions Width: 160 mm Height: 120 mm Thickness: 3 mm base plate, with text raised an additional 1.5 mm. Print notes The raised text makes this an ideal candidate for a mid-print colour swap. Print the first 3 mm in your base colour, then swap to a contrasting filament (like black or gold) for the final layers to make the letters and the crown pop. If you plan to write on the blank section, printing in PETG or applying clear vinyl will make it easier to wipe clean.
Switch Cartridge Travel Case
A rigid travel case for storing and transporting up to six Nintendo Switch cartridges. Designed to keep games organized and prevent them from rattling around loose inside a bag, the case features a low-profile two-piece construction. The sliding lid operates on a track and clicks securely into place using small side detents, ensuring it remains closed during transit. Features of the design: Six individual slots sized with clearance for standard 33x21x3.5mm cartridges. Integrated finger cutouts for easy removal of the games. Friction-fit locking detents on the sliding track to prevent accidental opening. Textured thumb grips on the lid for easier operation. Formatted as a two-piece assembly that prints flat on the bed.
Wishbone Pendant with Windblown Ribbon
What it's for A classic organic wishbone pendant featuring an integrated chain loop and a dramatic, windblown ribbon tied at the neck. Designed with an entirely flat back so it drops straight onto the build plate, it captures a specific aesthetic silhouette in a ready-to-print form. Dimensions The pendant measures roughly 58 mm wide by 67 mm tall, giving it a bold presence that works well on a longer chain or cord. Print notes Since the back sits flush at Z=0, no supports are required. Print it flat. A smaller nozzle or lower layer height will help capture the dome of the bone and the taper of the ribbon tails perfectly.
Flexi Baby Dragon
A fully articulated, print-in-place baby dragon. Built with six interlocking segments swinging on vertical captive hinges, it prints assembled and wiggles straight off the bed. Making it yours The joint math is solid, which leaves you free to mess with the shape: Scale: The default 0.5mm joint clearance scales well — you can safely blow this up 150% or 200% to make a desk toy without fusing the hinges. Limbs: The legs and wings are basic primitives tacked onto the torso and back segments. Perfect candidates to swap out for something wilder. Head: The front block is built out with basic eyes and horns, waiting for a proper sculpt. Prints without supports. Let it cool before snapping the joints free for the first time.
Need a part that doesn't exist yet?
Start building →