3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
Weathered Scimitar Display Prop
What it's for A desk-sized display piece featuring a heavy scimitar curve, weathered blade damage, and an intricate pommel. Dimensions Overall Length: ~245 mm Blade Thickness: 5 mm at the spine Grip Length: 50 mm Print notes Symmetrical design. If printing on a standard FDM setup, sink it down the Z-axis by 9 mm in your slicer to produce a flat-backed version that prints perfectly with no supports.
Ares — Grid Runner
A classic grid-runner profile featuring heavily armored, solid-body construction and a towering, tapered light trail sweeping from the rear. This edition swaps out the skeletal inner frame for a fully sealed chassis, completing the heavy, planted aesthetic. Features Solid Core Construction: Fully enclosed central chassis removing the exposed linkages for a cleaner fuselage. Tapered Trail: The hardlight ribbon now stands tall at the wheel and tapers downward, backed by a secondary ground-illumination strip. Swept Cowls: Seamless front-to-back canopy and heavily scooped side armor for maximum track dominance.
Slotted Junk Drawer Dividers
A set of four interlocking drawer dividers designed for junk drawer triage. The slotted design allows the pieces to be crossed at right angles to create custom-sized grid compartments. What it's for Organizing 35 cm deep drawers. Creating modular grids for loose items, hardware, or office supplies. Taming messy spaces with a rigid interlocking structure. Dimensions Length: 350 mm per divider. Height: 50 mm. Thickness: 2.4 mm walls. Slot spacing: Spaced every 50 mm along the length, with flared entries for easier assembly. Remix ideas Modify the slot spacing to create custom, unequal compartment sizes. Adjust the overall length to fit shallower or deeper desk drawers. Increase the height for deeper toolboxes or storage bins.
Ancient Temple Reptile Hide
A geometric, floorless hideout designed for small reptiles, shaped like an ancient stepped pyramid. It features two arched entryways to prevent the animal from feeling cornered and a built-in side altar that holds a perfectly fitted, drop-in water dish. The tiered shape isn't just aesthetic—it prints cleanly without any supports, and gives climbing species a textured surface to explore. Every exposed edge inside and out is lightly rounded to keep delicate scales safe, and the custom water bowl has a smoothed interior so you can wipe it out easily. Remixing and Sizing This design is built for standard enclosures and easy FDM printing, but scales predictably if you need to adjust it: Total Footprint: 210mm wide (including the altar) by 150mm deep, hitting right around the 8-inch mark. Hide Interior: Roughly 152mm x 142mm at the base, stepping inwards. Entrances: 45mm wide and 40mm tall—ideal for leopard geckos, smaller snakes, or juvenile beardies. Scale the whole model up uniformly if you have a larger animal. Water Bowl: 73mm diameter, holding about 70ml. If you lose it, the recess on the temple is exactly 75mm wide and 20mm deep, which easily fits a standard small deli cup or bottle cap depending on your scale.
HexAdapt — Spa Jet Adapter
A precision-cut female adapter engineered to mate with non-standard 1.750" (44.45 mm) hot tub and spa jet threads. Bypassing the conventional 1.5" nominal standards, this design is bored out with exact clearances tailored for ASA shrinkage and layer lines. Dimensions Female Thread: 44.45 mm base major diameter + 0.3 mm radial clearance (45.05 mm total cut). Pitch: 12 TPI (2.116 mm). Interface: Standard 1.5" flexible hose barb (38.1 mm core, 42 mm ridges). Wrench Drive: Heavy 64 mm hex. Print Notes Oriented flat on the hex base. No supports required. Designed with 0.3mm added radial clearance, making it ideal for dimensionally accurate ASA prints without post-processing.
Hovering Desk Light Cycle
Desk objects that tip backward are an instant nuisance. This Light Cycle runs a flat-bottomed low-slung chassis, putting the center of gravity where it belongs and dropping the nose so it plants firmly on a shelf or desk. Print details Dimensions: 26mm x 285mm x 53mm Clearance: Prints fully flat against the bed Assembly: Designed as a single plate print; uses regions to let you multi-color print the light ribbons and canopy in a slicer.
Tapered Scissor Belt Holster 2
bel
Light Cycle and Stabilizer Trail
A desk-friendly display model of a light cycle. The flat-bottomed hubs keep it planted, and an integrated light trail extends off the rear to serve as a 100mm stabilizer stand so it won't tip over. Fit & Print Details Dimensions: 170 mm total length, 21 mm wide at the wheels, 46 mm high at the canopy. Details: Deep vertical louvers and geometric cutouts along the side fairings break up the flat surface for better display lighting. Printing: The flat base elements mean this sits directly on the build plate. The trail serves as a built-in balance prop.
Console — Custom Electronics Enclosure
This is a comprehensive, dimensionally accurate parametric enclosure designed for DIY electronics. Laid out to securely house a 16×2 character LCD and four tactile push buttons, it uses standard M3 machine screws with captive nut traps for secure and repeatable assembly. The design separates the tactile switch bodies from the actual visible button caps, ensuring a clean and professional appearance. Features Locating Lip: Recessed rabbet ensures the top cover nests tightly and squarely onto the bottom shell. Component-Specific Pockets: 12×12 mm push-button switches are secured from the underside, operated by independent retained caps. Hidden Mounting: The 16×2 LCD is held flush against the top window from the inside via a custom bezel, keeping the surrounding PCB hidden. Directed Ventilation: Cooling slots are restricted to the lower front face, allowing flush wall mounting at the rear. Hardware Needed 4 × M3 × 12 mm machine screws 4 × M3 hex nuts (5.5 mm across flats) 4 × 12×12×7.3 mm tactile switches 1 × 16×2 Character LCD (JHD162A style)
Horizontal LCD Control Enclosure
A horizontal electronic project enclosure designed for control panels and desktop instruments. The assembly features an internal mounting frame for a standard 1602 LCD module and four 12mm tactile push buttons. Components install from the underside of the top cover, ensuring that only the display area and button caps are visible from the exterior. The two-part construction secures together using four M3 screws with captured hex nuts embedded in the bottom housing. Overall dimensions: 220mm × 140mm × 60mm Hardware required: 4× M3 screws, 4× M3 hex nuts Component mounts: 1602 LCD PCB (80x36mm) and 4× 12mm tactile switches Print orientation: Both parts print flat on the build plate without supports
Freestanding Dual Roll Holder
A freestanding, vertical storage post for two spare toilet paper rolls. Built to sit directly on the floor or a countertop. Remixing and Dimensions Capacity: The central stem is 190mm tall, which comfortably holds two standard 110mm-wide rolls. Base: 140mm diameter footprint with a sloped transition to anchor the post and prevent tipping. Printer compatibility: Total height is ~232mm, designed specifically to max out—but still fit—a standard 250mm Z-axis print volume (like an Ender 3). If you have a taller printer (e.g. 300mm+), extending the stem by 115mm increments will add capacity for a third or fourth roll.
Oversized Desk Device Stand
An oversized, stable desktop stand designed for larger devices. It uses a thick, continuous profile with a wide footprint and a deep front cradle to keep heavy hardware from tipping backwards. The underside is channeled out to ensure the stand rests securely on its front and back edges without rocking. Remix Variables Total Width: Currently 100 mm. Drop this to 60 mm if you want a slimmer profile, or stretch it to 150 mm for a massive tablet. Backrest Height: Reaches 110 mm off the desk. You can lower the rear profile points if your device sits fine on a shorter spine. Cradle Gap: Set at roughly 24 mm to accommodate thick cases or ruggedized hardware. Pull the inner cradle coordinates forward if you need a tighter grip on bare devices.
Hilti Nuron Battery Bracket v3
What it's for A heavy-duty, wall-mounted slide bracket engineered specifically for Hilti Nuron battery packs. Designed to mount vertically, it features precision-cut clearance channels and flared 45-degree entry ramps for blind sliding, backed by a solid stop block to prevent bottoming out. Four reinforced, deep-countersunk screw channels ensure the mount stays locked to the wall regardless of the battery weight. Dimensions Overall footprint: 107 mm length × ~93 mm width × 23.5 mm depth. Internal track: 61.5 mm outer track width, 51.5 mm inner neck clearance. Mounting: 4× countersunk screw holes (5.5 mm shaft, 13.5 mm head, 5 mm deep sink). Print notes Recommend rigid, high-strength materials like PETG or ABS to handle the repeated friction and weight of the Nuron packs. Print face up with the flat back resting completely against the bed. Clearances are set to exact measurements, so a well-tuned printer is necessary to keep the slide rails from binding.
no clip Hilti nuron v3
Screws mounted inside the track usually mean the battery casing drags across the screw heads if they don't sit perfectly flush. Moving the mounting holes to the solid outer flanges gets the hardware entirely out of the sliding path and stops the bracket from rocking when you yank a heavy pack out. Width: Pushed out to 94mm to give the screws enough meat to bite into. Clearance: 15mm deep counterbores hide the screw heads in the outer body, leaving a solid 5mm base to clamp against the wall.
Mobil Mainan dengan Interior
Model mobil mainan berukuran 120mm ini dicetak dengan interior yang sudah menyatu. Desain ini merangkum dasar-dasar bentuk kendaraan dengan jendela terbuka sehingga bagian dalam dapat terlihat jelas. Parameter yang bisa disesuaikan Proporsi: Panjang, lebar, dan tinggi atap bisa ditarik atau ditekan untuk mengubah jenis mobil dari sedan ke SUV. Roda: Diameter dan lebar roda dipisahkan agar mudah diganti ukurannya jika kamu ingin menggunakan ban karet tambahan. Interior: Posisi setir, ketebalan dasbor, dan ukuran kursi belakang memiliki ruang gerak untuk dimodifikasi menjadi model balap satu kursi atau van penumpang penuh. Dirancang agar dicetak utuh. Area kabin sengaja diukir cukup dalam dengan lantai rata untuk memudahkan modifikasi di masa depan.
7x10 PALS Grid Panel
A rigid 5mm structural plate designed to mate standard PALS/MOLLE accessories to flat surfaces. Scaled for vertical orientation. Fitment notes Grid layout: 3 columns wide by 5 rows tall. Plate dimensions: 177.8mm (7") wide by 254mm (10") tall. Sized specifically to fit within a standard 256x256mm build volume without diagonal rotation. Mounting interfaces: Standard 1-inch webbing slots with 1.5-inch column spacing. Outer edges carry oversized slots scaled for up to 1.5-inch hook-and-loop straps. Cord routing: 5mm bore holes at webbing intersections accept standard 1/8" or 4mm shock cord.
RÖDALM — Beveled iPad Mount
Transform an IKEA RÖDALM picture frame into a flush, wall-mounted iPad display. This two-part adapter replaces the stock mat and securely holds a 5th-generation iPad without rattling. The front face features a deep 22mm chamfer that drops precisely down to the active screen area, giving it a premium gallery look. The entire assembly sits on your printer's bed face-down and prints support-free. Features Support-Free Design: The steep internal bevel means you can print this flat without supports, resulting in a pristine front face. Puzzle Lock: The two halves snap together at the centerline with extruded puzzle joints, aligning the faces perfectly. Continuous Power: An oversized bottom channel allows standard and right-angle Lightning cables to plug in and drop straight out the back, perfect for permanent wall mounting. Accessible: Dedicated cutouts for the home button, front camera, speakers, and side buttons. Cooling: Integrated back channels ensure passive airflow around the device. Print Notes Print face-down (the flat front face touching the build plate). No supports needed. Designed to comfortably fit on standard 220 × 220 mm beds.
IKEA RÖDALM iPad Mount
This 3D-printable adapter mounts a 9.7-inch iPad inside an IKEA RÖDALM 21x30 cm frame. It centers the device and acts as a rigid blackout mat to hide the bezels. The back face incorporates ventilation slots to dissipate heat during continuous display, along with access cutouts for the Lightning cable and buttons. Fit: iPad 5th/6th Generation (240 x 169.5 x 7.5 mm) Frame: IKEA RÖDALM (inner rebate 210 x 300 mm, 20 mm deep) Print settings: Prints face-down without supports. Tolerances: 0.5 mm extra clearance on all sides of the device pocket.
Rinsler — Desk Light Cycle
A stylized desk display piece inspired by vintage sci-fi light cycles. This version features an aggressive front cowl, chevron-sliced side fairings, and a solid neon light stream trailing out from the rear tire. Features Flat Stance: The underside of the chassis and tires are sliced at Z=1.5mm to sit perfectly flush against the build plate without needing supports underneath. Hubless Silhouette: Deep-set, open-core wheels echo classic sci-fi rims. Integrated Stream: The solid light trail serves as both a visual anchor and extra balance for the model. Print Notes Two-color capability recommended to separate the chassis elements from the neon glows and trail. The "Rinsler" stamp is small and obscure — orient the part to catch good cooling, or use a smaller nozzle if you want to hold the fine edges on the lettering.
Sci-Fi Identity Disc
A 3D-printable replica of a classic sci-fi identity disc, segmented into distinct parts for multi-colour printing or assembly. What it's for Designed as a cosplay prop or a display piece, this disc features an ergonomic grip core and recessed channels that can be printed in contrasting materials to simulate data rings. Dimensions Overall Diameter: 200 mm Thickness: 14 mm Grip Core Inner Diameter: 85 mm Print notes The model is broken into three distinct colour zones (Outer Blade, Inner Core, and Data Rings). For single-extruder setups, you can separate the regions in your slicer to print them individually and assemble them later.
Segmented Identity Disc
What it's for A multi-part Identity Disc designed for cosplay, display, or assembly. The main chassis features a continuously tapering mathematically generated sweep, thickest in the middle and curving smoothly down to the outer edge. The inner and outer energy rings are segmented and engineered as separate parts with a 0.3 mm clearance, allowing them to be printed in translucent filaments or contrasting colours before snapping perfectly into the chassis. Dimensions Overall Diameter: 200 mm Center Hole Diameter: 60 mm Max Thickness: 14 mm (at the inner ridge) Print notes Clearances: The energy rings are modeled at nominal dimensions, while the base body channels are cut with a baked-in 0.3 mm offset to ensure a snug fit off an FDM printer. Orientation: Print all parts flat on the bed. No supports should be strictly necessary for the main body if your printer handles shallow overhangs reasonably well.
Straddle — Braced Cubicle Hook
A heavy-duty U-shaped cubicle straddle hook featuring 3-inch horizontal hooks with diagonal gussets. The hooks are designed to hang flat against a cubicle wall to save space, while the triangular supports brace against downward load without snapping. Features 2.5-inch inner bridge width to fit standard cubicle walls 3-inch hooks facing forward and backward 45-degree under-hook gussets for maximum rigidity Prints flat on its side to align layer lines with load bearing direction
Wireless Battery Pack Enclosure
A rigid, minimalist two-part enclosure designed for a custom 5000mAh wireless power bank. The exterior mimics standard MagSafe packs with heavy corner radii and a flat profile, while the inside is sectioned to mount control hardware and charging coils safely. The base shell carries the primary mounting features: Battery Bay: Accommodates flat Li-Po cells with soft side-ribs to prevent lateral shifting without compressing the pack. PCB Mount: Four standoffs dimensioned for M2 self-tapping screws, separated from the battery bay by a low dividing wall with wire-routing channels. Ports: Cutouts on the bottom edge for a USB-C receptacle and a tactile switch. The top lid is hollowed to accept standard wireless charging hardware. Recesses for a 45mm Qi coil and a 56mm MagSafe magnetic ring are cut directly into the ceiling, leaving a minimal plastic floor (0.7mm to 1mm) to maximize magnetic adhesion and charging efficiency. A stepped lip aligns the lid securely into the base shell for final assembly.
Need a part that doesn't exist yet?
Start building →