3D-printable decor & display pieces
Lithophane shades, planters, trophies, wall art and display models. Browse what makers built, or describe the exact piece you want and Printy makes it.
Need one that fits your exact measurements? Start building →
Newest
projected displayit
A heavy, grounded display pedestal featuring an oversized, tapered rectangular frame. Designed to house a graded trading card or slab, it features a built-in cavity underneath for a 72mm LED puck light. The uplight casts through the vented base to illuminate the card inside the pass-through tunnel. Remix Hooks Base footprint: The base extends well beyond the frame to give it a solid stance — currently 200x120mm on the bottom tier. Frame pitch: The upper frame tapers deeply front-to-back while maintaining a steady 150mm width, giving the whole piece a commanding silhouette. Text & Shadow Carvings: The "DISPLAYIT" front text (size 8 Marcellus) and the abstract, smoke-like internal wall carvings are perfect candidates to tweak depending on what theme your display needs.
Robot Mech
Action figures with spindly joints and complex overhangs are miserable to print on an FDM machine — they snap at the ankles or turn into spaghetti under the arms. This is a heavy, blocky mech suit designed entirely out of chamfered armor plates. It trades sculpted organic details for a robust, aggressive hard-surface geometry that actually prints. The figure stands in a strict A-pose with wide, flat feet to maximize bed adhesion. Print Parameters Total Height: 157 mm Footprint: 48 mm wide stance Supports: Required under the arms and crotch (the A-pose keeps them minimal) Joints: Solid model (no moving parts to fuse)
Pepper's Ghost Enclosure
A three-part optical illusion experiment utilizing the Pepper's Ghost principle. The enclosure uses ambient light and a clear sheet of recycled plastic to project a reflection of a small figure, making it appear to float inside the dark interior. Specifications Illusion mechanism: Forward-leaning plastic reflects the illuminated floor pedestal into the viewer's direct line of sight. Adjustability: Slide-in stage features 1.2mm grooves at 35, 45, and 55 degrees to tune the reflection angle depending on the viewer's height. Assembly: Snap-fit front bezel holds the stage in place. No screws or glue required. Printing: All three pieces are designed to print flat without supports. In your slicer, split the model into objects and lay the main enclosure on its back.
Simple Layered 2.5D Fish
A flat, layered fish: oval body, forked tail, two fins and one big eye with a black pupil. Stripped down to a few clean shapes so it prints fast and reads clearly. Remix hooks Eye size: white is 13 mm, pupil 7 mm. Push the pupil off-centre for a different expression. Body: a 50 × 30 mm oval, 6 mm thick. Change the 0.6 scale for a fatter or slimmer fish. Tail and fins: 4 mm thick, one shared colour. Reshape the polygons for a different species. Pairs with: a magnet or keyring hole on the back, or a row of them as wall decor. Colour swaps: body, fins and eye are separate layers, so a filament change at 4 mm and 6 mm handles it.
Lichtkranz Dorf auf Kugelsockel
Ein asymmetrischer Kranz aus zehn unterschiedlich großen Häuschen, die sich an der Rückwand berühren und so eine durchgehende Silhouette bilden. Türen und Fenster sind tief ins Innere durchgestanzt, sodass das Licht eines Teelichts im 65-mm-Bodenglas nach außen dringen kann. Lichtdurchlässig: Die Öffnungen gehen durch die innere Wand direkt bis ans Glas. Abwechslungsreich: Jedes zweite Haus bricht die Höhe und Breite auf. Stabiler Kern: Der Sockel aus vier gestapelten Rillenkugeln trägt die Konstruktion sicher.
SMG-11 — Red Dot Machine Pistol Replica
SMG-11 is a life-size, non-functional display replica of the compact machine pistol from Rainbow Six Siege, built in the MAC-11 pattern. The magazine is a separate piece that slides out of a real well in the grip, and a rail-mounted red dot sight sits on top. Features Removable magazine with baseplate, feed lips, catch notch and witness holes Grip with mag well, side texturing, mag release button, trigger and trigger guard Boxy receiver with ejection port, side serrations, safety lever and front sling loop Grooved barrel with muzzle ring Top rail with cross slots, front sight with ears and cocking knob Red dot sight with housing, turrets, battery cap, lens and dot Open wire stock Print notes Overall length is about 280 mm with the stock, so it needs a large bed or splitting into sections. Print the magazine separately, baseplate down. The well has about 0.3 mm clearance per side. Wire stock rods may need supports. Display piece only; it has no working mechanism.
100mm Prop Camera
A classic DSLR-style prop camera. Built with a solid main body, a raised viewfinder block, and a two-stage fixed lens assembly. Width: 100mm Height: 72mm (including viewfinder) Depth: 72.5mm (including lens) Features: Ergonomic grip bump, distinct shutter button, chamfered viewfinder.
Gothic Gravestone Villain Trophy
What it's for A robust, display-ready Gothic gravestone trophy designed to award the best villain of the night. The piece is styled as a weathered cemetery monument on a heavy plinth, decorated with a prominent central skull, gothic bat silhouettes, and spiderwebs anchoring the upper arch. The text is physically raised from the stone face, providing sharp contrast and high readability. Dimensions Overall size: 90 mm wide, 160 mm tall, 35 mm deep. Base: 90 mm × 35 mm, forming a stable 20 mm thick foundation. Text and details: Extruded 1 mm past the main surface to ensure crisp layer lines. Print notes Designed for dual-color FDM printing. The geometry is fully manifold and structured so that the raised white details (the skull, webs, bats, and text) all align precisely on the forward Z-plane if laid flat. Orientation: The model generates standing upright for preview purposes. For FDM, rotate it 90 degrees backwards in your slicer so the text points straight up. Color swap: When printed flat on its back, simply schedule a filament change at the layer where the lettering begins to switch from black to white. No MMU or AMS is required. Supports: None needed if printed flat on its back.
Tea Light Skull
A geometric, stylized skull designed to hold a standard tea light. The model stands roughly 4 inches (100mm) tall and features a hollow inner chamber connected to the eyes and nose, allowing light to cast outwards. Height: ~101mm (4 inches) Base Opening: 42mm diameter (fits standard 38mm tea lights) Printability: Designed with a flat base. Supports are recommended for the eye sockets and inner ceiling depending on your printer's bridging capability. Material Note: White or off-white PLA is recommended to diffuse the light effectively. Ensure you only use battery-operated LED tea lights, as a real flame will melt the PLA.
Heka — Pharaonic Crook
A recreation of the iconic Pharaonic crook, featuring a segmented design that alternates between gold and lapis lazuli colours. The tight hook and long shaft make it a striking display piece or costume accessory. Features Segmented Build: Alternating bands carry up the main shaft and wrap around the sweeping hook. Inward Hook: The crook sweeps tightly inward and finishes with a sharp, vertical drop at the very tip. Dowel Ready: A 16.5mm socket at the base fits standard 5/8" wooden dowels for an easy staff handle.
Bonnet de Noël Plat
Un bonnet de Noël bicolore conçu pour être imprimé à plat, prêt à rejoindre un plateau. Épaisseur du bonnet : 3 mm Épaisseur de la bordure et du pompon : 3,5 mm Astuce de remix/impression : Le décalage de hauteur permet de programmer un changement de filament dans votre trancheur à exactement 3 mm, pour un motif bicolore sans extrudeur multiple. La courbure du flanc gauche a été accentuée pour un drapé plus naturel. Prêt à être percé pour un passage de fil, ou redimensionné selon la surface cible.
Unlit Sconce and Key
An unlit standing sconce with an empty basin and a fluted column. Features: Studded, stepped pedestal base Deeply fluted column with a central keyhole Separate antique-style skeleton key designed to fit the lock
Unlit Sconce and Key
An unlit standing sconce with an empty basin and a fluted column. Features: Studded, stepped pedestal base Deeply fluted column with a central keyhole Separate antique-style skeleton key designed to fit the lock
Turner Party Bowtie
Citrus-themed bowtie. Mates with a standard 10mm (3/8-inch) elastic neckband via twin integrated feed-through slots flanking the center knot. Fitment Host Material: 10mm elastic webbing or ribbon. Hardware: Requires no specialty T-hooks or sliders; the elastic threads directly through the base body. Clearances: The feed-through slots are cut completely clear of the raised fruit segments so the band won't bind. Designed to print flat in a single piece.
5mm Bore Heart Ornament
A flat-backed ornamental plate. The critical interface here is the 5 mm through-hole at the top dead centre — check the gauge of your hanging hooks or ribbon before running the file. Overall Dimensions: 70 mm width, 70 mm height, 3.8 mm total thickness. Base Plate: 3.0 mm thick, solid manifold for FDM. Raised Pattern: 0.8 mm extrusion above the base surface. Bore: 5.0 mm diameter. Lays entirely flat on the bed. No supports required.
TCC 3-Card Display Stand
A rigid, vertical display stand engineered specifically to hold three standard trading cards in penny sleeves. The stand features three independent, straight-drop slots and a commanding 170 mm rear backdrop to frame the collection. What it's for Built to display standard Pokémon or similar trading cards while kept safely inside their penny sleeves. The straight vertical drop ensures the cards sit completely upright without leaning, and the independent grooves keep them evenly spaced across the presentation wall. Dimensions Overall size: 236 mm wide × 50 mm deep × 170 mm tall. Slot dimensions: 70 mm wide × 10 mm deep × 2.4 mm thick (generously sized to slide penny sleeves in and out without binding). Spacing: 8 mm solid dividers between each card slot. Print notes Designed to print exactly as oriented without any supports. The rear braces add structural rigidity to the tall back wall without needing a massive block of filament. The front TCC lettering is modeled as a distinct region, allowing it to be printed easily as a flush colour change or an AMS/MMU paint region.
Givvy Display Logo
A thick, rounded "GIVVY" logo designed specifically for multi-color FDM printing (AMS/MMU). The text features a solid aqua centre surrounded by a continuous purple outline that merges the letters into a single, cohesive piece. Scaled perfectly for mounting onto a trading-card display stand. Dimensions: ~94 mm wide, ~31 mm high, and 3.2 mm thick. Format: Co-planar separate regions for the centre and outline, allowing easy assignment of different filaments in your slicer. Mounting: Perfectly flat back for flush gluing to display stands or frames.
GIVVY — Toploader Display Stand
GIVVY Display Stand brings a bold, architectural frame to your favorite sleeved or toploaded trading cards. The design couples a stable, low-profile sloped base with a prominent vertical backboard, acting as a canvas for the heavy, embossed typography. It's built in a single unyielding piece—ready to anchor a desk or elevate a display case without tipping. Dimensions Overall Footprint: 105mm wide × 46mm deep Height: 65mm total Card Slot: 90mm long, 5.5mm wide, pitched backward at a gentle 5 degrees for the optimal viewing angle. Print Notes Prints entirely without supports on its flat base. The raised lettering extends 3mm outward, easily catching overhead lighting for sharp contrast. Consider swapping filaments right at the 65mm Z-height (or painting the raised text) to make the branding pop.
Glatte Ballhalterung 130 mm
Eine stabile Halterung für Bälle mit 130 mm Durchmesser. Die Auflagefläche ist glatt und halboffen, sodass der Ball sicher sitzt und leicht entnommen werden kann. Passform: 130 mm (13 cm) Durchmesser Auflage: Glatte, U-förmige Schale ohne Stopper Struktur: Runder Standfuß mit massiven, geschwungenen Stützen
Rena de Natal Estilizada
Uma figura estilizada de uma rena de Natal, construída com formas sólidas arredondadas. O design apresenta proporções lúdicas, incluindo chifres ramificados e um nariz esférico de destaque na parte frontal. Estrutura de peça única (necessita de suportes para impressão FDM). Base estável em quatro pontos. Pode ser redimensionada no fatiador conforme necessário para decorações de mesa ou enfeites de árvore.
DeepVue — Display Frame
A deep, single-piece display frame designed with a classic rebate profile to hold glass or a backing board. Dimensions Outer footprint: 110 mm × 210 mm Total depth: 24 mm Front opening: 98 mm × 198 mm Front lip thickness: 3 mm Design Notes The frame features a 4 mm rounded outer corner profile and slightly tighter inner corners. The 6 mm wide front border gives way to a recessed cavity that leaves a sturdy 4 mm outer wall, perfect for deep shadow box displays.
Familystan-2
What it's for A custom desktop display featuring three names—Anwar, Shireen, and Aadheen—arranged in a triangle. The names lean inward to meet at the corners, sitting on top of a double base consisting of a triangular connecting frame and a wider circular footing. Dimensions Overall footprint: 70 mm x 70 mm (dictated by the circular base) Height: ~33 mm Base thickness: 4 mm combined (2 mm ring, 2 mm triangle) Print notes No supports required; the text is angled comfortably at 45 degrees. The names and frames are modeled distinctly for easy multi-color painting or layered printing.
240mm HOPE Desk Sign
A heavy-weight desk sign designed to sit flat on a desktop, shelving unit, or display rail. Features the word HOPE in Archivo Black type, extruded as a 10mm-thick relief structure. Dimensions Overall length: 240mm Base depth: 30mm Letter dimensions: 50mm wide x 60mm tall End clearance: exactly 10mm from the outer edges
Classic Low-Top Sneaker Model
What it's for A 100mm desktop model of a classic low-top sneaker, featuring a prominent T-toe, classic side stripes, and a contrasting gum sole. The lace panel has been updated with crossed physical laces and a tied bow. Dimensions Length: 102 mm Width: 37.5 mm Height: 37.5 mm Print notes Designed to print best oriented upright on its sole. Support may be necessary under the heel collar and toe-box overhangs, depending on cooling setup.
Need a part that doesn't exist yet?
Start building →