3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
witek1
A three-disk stacked cylinder, the standard database symbol, as a desk ornament or sign element. Disks are 50 mm across and 14 mm tall with 3 mm grooves, joined by a 42 mm core, and a thin cap sits on top. Remix hooks Disk count (n = 3): raise it for a taller stack, or drop to 2 for a compact version. Groove gap (3 mm): widen it for stronger shadow lines, or set it to 0 for a solid can. Diameter (50 mm) and disk height (14 mm): scale both for a keychain or a coaster-sized piece. Pairs with: a flat base plate with a label, or a magnet pocket in the bottom for a fridge version.
Chubby Sitting Hamster Keychain
A compact, sitting hamster figure modelled with exaggerated, rounded proportions for a chunky silhouette. The base is sheared flat to allow support-free printing directly on the build plate, and a reinforced loop is integrated into the upper back of the head. Dimensions: ~28mm wide, 30mm tall. Keyring Loop: 3.2mm horizontal bore, heavily chamfered outer ring. Print Settings: Print upright. The limbs and facial features intersect closely with the main body to minimise overhangs; no supports are required.
Chaîne articulée de 40 maillons clipsables
Une chaîne imprimée d'un bloc se désassemble au moindre effort, et une chaîne trop courte ne sert à rien. Cette version aligne 40 petits maillons à rotule, à clipser à la main pour obtenir une chaîne d'environ 190 mm. Chaque maillon a une rotule d'un côté et une douille à quatre pétales de l'autre. Les pétales plient au passage de la rotule puis se referment, ce qui laisse la chaîne se plier dans toutes les directions et se démonter sans outil. Chiffres utiles Largeur d'un maillon : 4,6 mm Pas entre maillons : 4,8 mm Longueur assemblée : environ 190 mm (40 maillons) Jeu théorique : 0,15 mm par côté, à ajuster selon l'imprimante Impression : maillons à plat, en deux colonnes de 20, sans supports Matériau conseillé : PETG, plus tolérant que le PLA pour les pétales fins Buse 0,4 mm, hauteur de couche 0,12 à 0,16 mm
Handheld-Gehäuse 255×130 mm, Unterschale 46 mm
Zweiteiliges Handheld-Gehäuse 255 × 130 mm für eine selbstgebaute Konsole, mit herausnehmbarer Anschlussblende für die 100 × 30 mm große Kabel- und USB-Öffnung in der Rückwand. Maße zum Prüfen Unterschale: 46 mm von Boden bis Oberkante, Wandstärke 3 mm Oberschale: 12 mm hoch Display-Fenster: 155 × 87 mm, Modulaufnahme für 166 × 100 mm Tastenlöcher: 7,2 mm Klipp-Platte: Außenrand 104 × 34 mm, Einsatz 99,6 × 29,6 mm Passt nicht Display-Module, die größer als 166 × 100 mm sind Andere Rückwand-Aussparungen als 100 × 30 mm Vor dem Druck die Modulmaße des eigenen Displays gegenmessen. Schalen offen nach oben, Platte flach, ohne Stützen druckbar.
Micro Print-in-Place Joystick
This is a miniature print-in-place joystick that functions as a tactile desk toy. The internal geometry has been rebuilt to ensure the ball joint prints cleanly without supports or mid-air extrusion failures.
XIAO ESP32-S3 Chatbot Shell
Boîtier compact conçu pour intégrer une carte Seeed Studio XIAO ESP32-S3 Sense avec caméra, un écran TFT de 1,54" en façade et un haut-parleur plat (3525). L'ensemble se ferme via un tiroir coulissant en sous-face. Vérifications de montage : L'écran s'insère par l'intérieur (espace pour PCB de 32x43,7 mm). La carte XIAO repose sur une butée interne située à 43,7 mm du fond, avec une profondeur d'appui de 15 mm. La caméra pointe par le trou carré de 10 mm en façade. L'accès USB-C sort par le haut. Le haut-parleur 3525 s'encastre à fleur par l'extérieur du toit.
19.5mm Desk Edge Puck Mount
Edge-mounted charging cradle sized for the 33.5mm Google Pixel Watch magnetic puck. Designed to drop over a standard 3/4-inch (19.5mm) wood plank. Fitment: The 33.5mm bore sits at the rear of the housing. You push the puck in from the back, then slide the whole assembly over your desk edge — the wood itself traps the puck so it cannot back out. Cable Routing: An 8mm slot on the bottom allows the cable to drop cleanly out of the way. Incompatibilities: Does not fit full-sized phone Qi chargers or desks thicker than 19.5mm without adjustment. Phone hooks have been removed from this version.
Micro Print-in-Place Joystick
This is a print-in-place ball joint that acts as a miniature thumb joystick. The entire assembly prints as one welded-together block with an internal 0.4 mm gap; once it's off the build plate, a firm snap frees the stick to rotate and swivel in the base. It is designed to be as small as FDM printers can reliably manage without snapping the stalk.
43mm Bore Egg DSLR Kit
A multi-part glue-together camera chassis built around a 43mm bore standard to hold two large chicken eggs. The main chassis houses the egg bores and the right-hand grip, while all dials, rings, and screens are printed separately and dropped into 1mm alignment recesses on the main block. Fitment Fits two standard large/jumbo chicken eggs (vertical clearance is completely unimpeded) Mounts to flat build plates only; requires CA glue or similar for the detail pieces Main chassis is 125mm wide; ensure your plate can handle it before starting
Class III Cranial Armor Dome
Standard infantry cranial armor. Mates with a standard adult human neck ring. Fitment Specs Internal Bore: 178mm wide by 220mm deep. Check your cranium measurements before attempting integration. Mating Surface: Flat bottom Z-plane, intended for a Class III pressure collar. Clearance: If your species has protruding mandibles or horns, this block will not clear. Do not force fit. Machined from heavy geometric stock. You want "highly detailed, game asset" textures, you'll need to hit it with a weathering wash yourself. I just build the plating so it deflects plasma.
Elderstab 1.0
What it's for A two-piece print of the iconic Elder Wand, split cleverly right after the third handle knob to hide the seam. Dimensions Total length: ~250 mm Handle: ~102 mm, featuring a 10.4 mm x 3.2 mm recess for a ring magnet and a 35 mm deep secret compartment (6.5 mm diameter) hidden behind it. Tip: ~150 mm, with a 10.4 mm x 3.8 mm recess for a flat magnet (includes extra depth for felt padding). Assembly Glue a 10x3 mm ring magnet into the handle and a 10x2 mm flat magnet into the tip. Add a thin piece of felt between them for a softer snap. The secret compartment can hold a tightly rolled message.
Assistive Smart Goggles Chassis
What it's for A wearable housing for smart glasses components, scaled to fit a human head. Features isolated electronic cavities, hollow arms for speakers and haptics, and integrated ports for front-facing cameras and downward sensors. Dimensions Overall Width: 150 mm Lens Housings: 52 mm tall, 18 mm deep Temple Arms: 11 mm wide, with a 30-degree drop behind the ear Assembly The frame and two arms print as separate flat-laid components without supports. Hinge tabs are modeled in — use short 3 mm pins or filament offcuts to join them.
Handheld-Gehäuse mit herausnehmbarer Anschlussblende
Handheld-Gehäuse für eine selbstgebaute Konsole, bei dem die Kabel- und USB-Öffnung hinten nicht dauerhaft offen bleibt: Eine Klipp-Platte schließt sie und lässt sich bei Bedarf herausnehmen. Aussparung in der Rückwand: 100 × 30 mm, mittig Klipp-Platte: Außenrand 104 × 34 mm, Einsatz 99,6 × 29,6 mm, zwei Federarme mit Rastnasen, Fingermulde Innentiefe: 48 mm, Wandstärke 3 mm Display-Fenster 155 × 87 mm, Tastenlöcher 7,2 mm Druck: Schalen offen nach oben, Platte flach, ohne Stützen möglich
Modular Hexagon Phone Stand
A modern, modular phone stand built around a pure hexagonal base. The design allows multiple units to link together sideways via a built-in tab and slot system, perfect for keeping a row of devices organized on a desk or creating an expanding charging station. Design Highlights: 70-Degree Rest: The back support leans back comfortably for viewing notifications or media. Cable Management: A central pass-through routes your charging cable securely out the bottom via hidden channels. Print-in-Place Linkage: Built-in puzzle-piece connections require no extra hardware to link modules. Split Front Lip: Keeps the device firmly seated while leaving the center clear for downward cable runs.
Airpods clip
A compact, single-piece dual clip designed to snap onto the stems of AirPods Pro, holding the pair securely together without the charging case. The inner bores feature flared entries at the top and bottom to guide the stems in smoothly, while the front openings are angled to flex just enough to let the earbuds snap in and out laterally. The design prints flat without supports and relies on the natural stiffness of the filament to grip the smooth plastic of the stems. Remix Hooks This geometry is essentially a tension spring—the fit relies on your printer's tolerances and the material you choose. Opening Gap (Currently 4.8 mm): If PLA snaps when inserting the earbuds, widen the inner points of the front slot. Inner Diameter (Currently 6.4 mm): Sized for a snug friction fit on the Pro stems. Dial this up slightly if using a very rigid material, or down if you want a tighter lock. Bridge Thickness (Currently 4.5 mm): Widen this if you want to attach a lanyard loop or carabiner hole to the center.
Duo Gear — 30T and 15T Spur Pair
Duo is a matched pair of spur gears at a 2:1 ratio: a 30-tooth gear measuring 90 mm across the tips and a 15-tooth partner, both 10 mm thick. Tooth size is shared, so they mesh directly and are laid out at the correct centre distance. Features 30-tooth gear: 90 mm outer diameter, 10 mm bore 15-tooth gear: same tooth pitch, 8 mm bore Both 10 mm high, flat on the bed Pre-positioned in mesh Print notes Print flat, no supports. Adjust bores to fit your shafts.
GutMap — IBS Educational Diorama
GutMap is a tabletop teaching diorama that walks through Irritable Bowel Syndrome in five connected stations: normal function, IBS mechanism, lab markers, diagnosis and treatment. Raised organs, lab tubes, capsules and a clipboard sit on colour-coded tiles, linked by a continuous orange flow arrow, with a title wall and a separate reference panel at the back. Features Normal colon with segmented (haustra-style) walls and cecum Gut-brain station: brain, spasming colon, stress bolt Lab rack with CBC, CRP and calprotectin tubes, plus a note that no single test confirms IBS Diagnosis station with clipboard and stethoscope Treatment station: antispasmodic, antidiarrheal and laxative capsules, diet and low-FODMAP, exercise, sleep, stress management Legend, notes plate, title wall with group and supervisor/TA placeholders Reference panel: NIDDK, World Gastroenterology Organisation, Mayo Clinic Dimensions Base: 420 x 230 x 10 mm Back wall height: 62 mm overall Section tiles: 74 x 104 mm each Print notes Everything is one connected, flat-bottomed assembly; no floating parts. Text is raised 1 mm, 4 mm and larger. Print in multiple colours or paint the declared regions. Replace the bracketed member and supervisor names before printing.
Seatbelt Buckle Holder with Snap Clips
A twin seatbelt buckle holder with two separate snap clips. Each clip bridges the top of a pocket and clicks into grooves on the sleeve, so the buckle can't tip out. Remix hooks Bar width (8 mm): widen it for a firmer hold, or narrow it for easier buckle removal. Groove height (18 mm up the sleeve): move it to change how far the clip sits above the pocket. Barb depth (about 1 mm): increase it for a stronger snap, or reduce it if the arms feel stiff in your filament. Arm thickness (2.2 mm): thinner flexes more, thicker holds more. Pairs with: the original 33 x 53 mm pockets, 28 mm sleeves, and 130 x 64 mm footprint, all unchanged. Print the clips flat as laid out, with the bar on the bed. PETG flexes better than PLA for the arms.
Published
A dashboard phone cradle perfectly sized for an iPhone 15 Plus in a standard case, built with a heavy-duty vent mount clip. Center Star Motif: A single crisp five-point star punched through the bottom face. Vent Clip: Uses cross slits for a snug friction fit on standard car air vent louvers. Side Access: The midsection is cut away, leaving only top and bottom cuffs so your side buttons remain entirely clear.
Double Seatbelt Buckle Holder, Backseat
Two seatbelt buckles flop around and fall into the seat gap, so this holder stands both upright side by side in the backseat of a Toyota Sienta. Each 33 x 53 mm pocket goes straight through the base, so the buckle and webbing pass through with nothing blocking the bottom. Pocket size: 33 x 53 mm each, sized for a 31 x 51 mm buckle Sleeve height: 28 mm above a 6 mm base Overall footprint: 130 x 64 mm Centre screw hole: 4.5 mm Print flat on the base, no supports needed
Caja sci-fi para ESP32, RCA y driver
Caja para electrónica con ESP32, dos salidas RCA, jack DC hembra y un driver que no entraba cómodo: los conectores de la pared derecha quedaban pegados al driver. Ahora la caja es más larga y hay luz entre ambos. Medida exterior: 132,8 × 60 × 28,8 mm. Separación: unos 26 mm entre los postes del driver y la pared con RCA y jack. Conectores: dos agujeros de 8,2 mm (RCA) y uno de 11,2 mm (jack DC), frente a la ranura USB. Montaje: 4 tornillos M3 en las esquinas; la tapa lleva rejillas y ranuras decorativas. Impresión: base y tapa por separado, sin soportes si se imprime la base apoyada en el fondo.
Dschungel
Oasis bringt ein kleines Stück Urlaub direkt auf den Schreibtisch. Dieses minimalistische Strand-Diorama kombiniert eine solide Basis aus flachem Sand und ruhigem Wasser mit einer ikonischen, leicht geneigten Palme. Es eignet sich ideal als entspannendes Deko-Objekt oder als Kulisse für kleine Figuren. Dimensionen Grundfläche: 100 mm x 100 mm Höhe (Sand): 8 mm Höhe (Wasser): 4 mm Gesamthöhe: ca. 45 mm (inklusive Palme) Druckhinweise Die Basis lässt sich einfach und flach auf das Druckbett legen. Für die ausladenden Blätter der Palme werden leichte Stützstrukturen (Supports) empfohlen, damit sie sauber in der Luft gedruckt werden können. Wer es mehrfarbig mag, kann den Druck auf bestimmten Z-Höhen pausieren oder direkt mehrfarbiges Filament verwenden.
5 Resin Bookmark Mold
An open-face silicone-free printed mold block with five rounded-end bookmark cavities side by side. Overall size is 175 × 145 × 6 mm, so it fits most print beds. Each cavity has fully semicircular ends, a shallow inner recess, and a small peg near the top that forms the tassel hole. Pour resin to the rim and level the mold while it cures. Overall size: 175 × 145 × 6 mm Five cavities, each about 30 × 137 mm Peg for a 5 mm tassel hole in every cavity Prints flat, no supports needed Apply mold release before casting
Modular Hexagonal Phone Stand
What it's for A single-piece modular phone stand designed around a regular hexagonal footprint. It features an angled 70-degree backrest for optimal viewing and a sturdy front retaining lip. A central U-groove is carved through the front lip and into the base, allowing a charging cable to pass cleanly underneath the phone while docked. The stand is designed to tile: dovetail tabs on the right side match with identical slots on the left side, allowing multiple hexagonal units to be linked together into a continuous charging array or desk organizer without any extra hardware. Dimensions Base size: 80 mm across opposite vertices, sitting 6 mm thick. Back panel: 65 mm tall, leaning back at a 20-degree angle from vertical. Front lip: 10 mm high above the resting surface, leaving a generous 23 mm gap for the device. Cable groove: 12 mm wide, recessing down to a 2 mm floor height. Print notes Designed to print entirely support-free in its default upright orientation. The 0.2 mm clearance on the dovetail joints should slide together firmly on a well-calibrated machine. Standard PLA or PETG will provide plenty of strength for the upright panels.
Need a part that doesn't exist yet?
Start building →