3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
Gas Flow Regulator Replacement Knob
Heavy-duty replacement rotary control knob designed for gas regulators, torch bottles, and flow control valves. Features deep perimeter fluting to ensure positive grip even when operating with work gloves, a top recess with directional flow arc, and distinct raised minus and plus indicators. The underside features an 8 mm double-flat valve stem socket (6.5 mm across flats, 18 mm deep) with a transverse grub screw cross-bore for secure mechanical locking onto brass regulator shafts. Outer diameter: 46 mm Total height: 26 mm Grip: 12 scalloped finger flutes Stem bore: 8.2 mm with 6.5 mm double-D flats, 18 mm socket depth Set screw: M4 / 3.4 mm cross-bore for grub screw retention Markings: 270-degree indicator arc with raised +/- flow indicators
Tactical Vault USB Shell
A heavy-duty tactical enclosure designed specifically for the SanDisk Cruzer Blade. The shell features a top-loading drop cavity that allows the drive to be inserted at an angle, pushing the USB contact point safely through the reinforced front port. Once seated, a fitted rear plate slides in on a dovetail-style track to lock the drive down, exposing only the functional plug. Deployment Notes Insertion Protocol: Angle the drive nose-down into the front port first, then snap the tail into the cavity. Locking Mechanism: The bright slider runs on a 1.5mm recessed rail, clamping the drive securely against the front bulkhead. Clearances: Sized to grip the Cruzer Blade's low-profile plastic housing while leaving the metal contacts fully operational.
Cruzer Blade Sliding Enclosure
A thick-walled, two-part protective enclosure dimensioned specifically for the SanDisk Cruzer Blade. The assembly consists of a main retaining shell and a sliding captive lid. Fitment: Internal cavity measures 42.3 x 18.4 x 8.0 mm (allowing 0.5 mm clearance around the drive). Retention: Dual 0.4 mm internal Z-axis ribs provide friction fit against the drive housing. A solid rear wall prevents push-through. Mechanism: The left-side lid operates on dual 1.5 mm Y-axis rail grooves, featuring spherical detents at both ends of travel for locked open and closed states. Construction: 2.5 mm exterior walls in all directions for rigid PETG FDM printing. The top face includes a 1 mm recess for labelling and a subtracted diagonal chevron pattern.
1/400 Widebody Jetbridge
A static 1/400 scale airport jetbridge model, dimensioned specifically for widebody aircraft like the Boeing 777, 787, and Airbus A350. The model is scaled so the cab floor rests roughly 11.5 mm off the apron, translating to a 4.6-meter door sill height in real life. Features: Rotunda: 20 mm tall pivot base to anchor against terminal buildings. Tunnels: Fixed stepped sections showing the inner and outer telescopic sleeves, topped with low-profile AC units. Bogie: Quad-wheel lift mechanism bridging the ground and the junction. Cab: Angled head with a protruding bumper seal to interface with the aircraft fuselage. Designed with robust 1.5 mm minimum strut thicknesses to survive FDM printing at this scale. Resin printing is recommended for the sharpest results on the wheels and AC boxes.
Aero — Concept Car Glasses Dock
A sleek, aerodynamic monolithic glasses stand shaped like a concept car. Features Integrated Dock: Deep channel cuts straight across the front hood and fenders. Stable Stance: Solid body and integrated flush wheels prevent tipping. Print Ready: Single-piece design with rounded corners for easy printing.
Sleek Flat Tube Squeezer
A minimalist, flat-profile tube squeezer designed to slide over toothpaste or lotion tubes, pushing every last drop to the nozzle. Design Notes Flat Printing: The slot runs completely through the vertical axis, meaning it prints flat on the bed with zero bridging or supports required. Low Material: Thinned down to a sturdy but efficient 5mm profile. Sleek Ends: Aggressively rounded corners make it comfortable to grip and pull. Compatibility: The 70mm slot accommodates tubes up to 42mm in diameter (which spread to ~66mm when flattened).
80mm Tube Squeezer
A heavy-duty tube squeezer sized to clear 80 mm wide tubes. The outer shell is heavily rounded for a comfortable grip while applying torque, and it prints flat on the bed with no supports required. Remix Hooks Slot Gap: Currently set to 1.8 mm. Widen this if you are pushing thick metal paint tubes, or narrow it to 1.2 mm for thin plastic tubes. Overall Width: Built at 108 mm to leave a solid 11 mm wall on either side of the 86 mm slot. Scale the X axis for a different balance between strength and footprint. Thickness: 12 mm deep. Scaling the Z axis changes how much bite it has on the tube and how much leverage it offers.
Milwaukee Packout Speaker Spacer
What it's for A custom fit speaker spacer designed specifically to adapt standard 6x9 automotive speakers into Milwaukee Packout toolboxes. The spacer features a wedge design to angle the audio directionally, a support grid pattern embedded on the underside for structural rigidity, and elongated mounting slots for flexible installation. Dimensions Length: 375 mm Width: 175 mm Height: Tapers from 10 mm at the rear to 26.5 mm at the front Cutout: Fits a standard 218 mm x 148 mm 6x9 speaker basket Remix ideas Swap the layout option to dual-mount or front-mount depending on the specific Packout box variant. Adjust the mounting slot spacing to align with non-standard speaker grilles.
Signo DX UMR-1 Custom Pen
A precision-fit pen chassis designed exclusively around the Uni-ball Signo DX (UMR-1) refill. The design consists of three pieces: a threaded barrel, a tapered front grip section that locks the refill shoulder in place, and a flush-fitting cap. Fitment Notes Refill: Uni-ball Signo DX / UMR-1 series (typically 0.38mm or 0.28mm capped refills). Not Compatible With: Retractable UMR-83 refills (Signo RT) — they lack the rigid front shoulder this grip relies on to stop the tip. Assembly: The grip threads onto the barrel using an M8x1 thread. The cap slides completely over the grip and friction-locks onto a slight taper at the front of the barrel. Tuning: If the refill rattles slightly from manufacturing tolerances, a tiny piece of foam or paper in the bottom of the barrel will compress it tight.
Scooped 96mm Cabinet Pull
A modern cylindrical cabinet pull featuring a wide, shallow finger scoop on the rear face. It stands off the cabinet by 35mm to allow natural grip clearance, designed around standard 96mm screw centers for direct replacement of existing hardware. Remix Hooks Screw Centers: Currently spaced at 96mm for standard cabinets, but easily stretched to 128mm or 160mm by shifting the standoffs along the X-axis. Bar Dimensions: The 16mm diameter and 130mm overall length can be scaled up for heavier pantry doors or scaled down to 12mm for a sleeker profile on lighter drawers. Finger Scoop: Cut using a 36mm cylinder subtracted from the rear. Adjusting the diameter or offset of this cutter will deepen or shallow out the grip.
Tapered Plug For salt shakers
A solid tapered plug to replace the rubber foot that vanished from the chair leg three moves ago, ending the tilt that sends your coffee sliding across the desk. It wedges directly into a standard hollow tube or serves as a standalone standoff. Dimensions for fit: Base diameter: 10 mm (the wide end sitting on the floor) Top diameter: 7 mm (the narrow end driving into the socket) Height: 8 mm clearance
Gothic Engraved Star Cross
An ornate, gothic-style cross pendant featuring an engraved surface with diamond cuts and quatrefoils, overlaid with a beveled Star of David at the center intersection. Format: Flat-backed for printing, 3 mm thick. Style: Gothic engravings with beveled (chamfered) edges. Mounting: Standard flat top loop with a 5 mm opening for jump rings.
Wide Garden Plaque
A flat, printable garden plaque with a wide upper face for text and a lower stake designed for soil insertion. Wide face: 145mm across, accommodating multiple lines of text. Insertion stake: 100mm long, tapering to a point. Raised lettering: Extruded 1.5mm from the surface for crisp layer changes.
Miniature Rope Swing Plank
A simple, well-proportioned rectangular block designed to act as a miniature swing seat or hanging platform. Remix Hooks Footprint: Currently 59mm wide and 40mm deep, but completely scalable for different dioramas. Thickness: 19mm thick. Rope holes: 5mm diameter holes spaced 6mm from each end, ready for string or paracord. Finish: Features a 2mm rounding on all edges so it isn't sharp to the touch.
10mm Speaker Wire Tie Saddle
A flat-mount zip tie saddle designed to route speaker wire along skirting boards. The base sits flush against the mounting surface, accepting a single countersunk screw to anchor the assembly before threading the tie. Fastener Standard: Countersink fits #6 or #8 flat-head wood screws. Tie Clearance: Pass-through slot accepts standard nylon zip ties up to 5mm wide. Capacity: Cupped cradle holds wire bundles up to 10mm in diameter. Measurement to Check: Verify your outer wire jacket combined diameter does not exceed 10mm; oversized bundles will bridge the cradle and stress the zip tie rather than resting in the saddle.
Wall Mounted Multi Tape Dispenser
A wall-mounted multi-roll tape dispenser designed for workshops, packing stations, and craft benches. The bracket holds standard rolls of masking, painters, or packing tape on a central spindle and provides a rigid front tear bar with serrated teeth for clean one-handed pulls. What it's for Organising multiple rolls of workshop tape on a single wall-hung fixture so individual rolls can spin freely and be torn to length without chasing loose rolls around the bench. Dimensions Overall Width: 200 mm total width (180 mm usable tape span between arms) Wall Height: 90 mm backplate with 4x countersunk screw holes Wall Reach: 130 mm forward projection Spindle Diameter: 19 mm rod fitting standard 1" (25 mm) or 3" (76 mm) tape cores Print notes Print the main wall mount frame flat on its rear backplate or on one side face to eliminate tall support overhangs. The removable spindle prints horizontally with a small brim or vertically in two halves if your build height allows.
Ergonomic Tube Squeezer
A straightforward, rigid tube squeezer designed for wide tubes like bulk lotions, large toothpaste tubes, or shop greases. The internal slit is precisely sized to slide firmly over the flattened end of a standard or oversized tube, forcing the contents forward without slipping back. What it's for Bathroom: Oversized toothpaste or cosmetic tubes. Workshop: Thick silicone, glue, or grease tubes. Kitchen: Tomato paste, icing, or food gels. Dimensions Overall Size: 90 mm wide × 32 mm deep × 5 mm thick. Slit Size: 63.5 mm (2.5 inches) long × 1.5 mm wide. Clearance: The 1.5 mm slit provides a tight pinch to maximize extraction. Print notes Prints flat on its base without supports. Requires a rigid material; standard PLA or PETG works perfectly. High infill (50%+) is recommended so the piece doesn't flex or snap under heavy squeezing pressure.
5-Piece Vented Offset Wand
A fully modular, five-piece fluid wand assembly designed with standard slip joints. It features a 16-inch total vented reach (split into two 8-inch sections), an S-bend offset made from two 90-degree elbows, and finishes with a 3-inch adapter barbed for standard 5/8-inch ID flexible tubing. Remix Hooks Clearances: The slip joints are set up with a baseline 0.4mm tolerance (mjointod = 11.9mm into fjointid = 12.3mm). If your printer runs wide, dial the male joints down a fraction. Barb Size: The barb tops out around 18.3mm to bite firmly into a 5/8" (15.875mm) inner-diameter soft tube. Tweak the d2 array loop if you need it more aggressive. Hole Spacing: Currently spaced at 12mm intervals along a single side, starting past the first slip joint. Easy to pattern out to a spiral or double row.
Snap-On Cable ID Flags
A set of small clip-on flags with flat paddles to label your cords, because pulling the wrong plug—like the router instead of a lamp—has real consequences. The C-clip flexes over the cable and snaps shut, holding the label face out so you can identify the line at a glance. Remix Hooks Cable Diameter: The clips are currently sized with a 6mm core and a 3.6mm opening slot, designed to flex around 4mm to 7mm cords. Scale the cable_d parameter up for thick power lines or down for thin USB cables. Paddle Dimensions: Set at 25x12mm with a 1.6mm thickness. You can stretch the width to fit longer text, or edit the source to emboss text directly onto the surface instead of using a marker or label maker. Clip Flexibility: The clip walls are 1.8mm thick. If you are printing in a stiff material and find it hard to snap on, thin the walls slightly or widen the main opening slot.
Loose Insurance Lettering
Custom loose lettering for Haley's Insurance, designed to fit cleanly inside a specific bounding area. Features of this model: Bold Typography: Uses Archivo Black for maximum readability and thickness. Defined Footprint: Text is sized and spaced to fit strictly within a 1.5 x 1 inch boundary with a 1/8 inch margin. Removable Frame: Includes a 1mm tall outer reference frame that can be deleted or skipped in the slicer. Full Height: Letters are extruded to a full 1/4 inch depth.
Console Sequential Shifter
A print-in-place sequential shifter toy wrapped in a chunky closed-box console. The internal mechanics rely on built-in compliant flexures: leaf springs in the side walls create the tactile shift detents, while zigzag end-springs automatically snap the stick back to center after each throw. Modification Hooks Console Shell: Currently 46x96mm and 26mm tall. It's built wide enough to house the 1.2mm wall flexures. Lever Travel: The top slot is 12x60mm, allowing the 10mm shifter shaft to travel far enough to clear the internal resistance bumps before the springs pull it back. Stick Profile: Swapping the 18mm spherical knob out for a cylindrical handle or a stylized top is a quick replacement in the code.
Knurled Tripod Thread Adapter
A threaded step adapter for mounting 3/8-16 photography and audio equipment to standard 1/4-20 tripod studs. The flanged base features a deeply scalloped outer diameter to allow firm, tool-free tightening. Specifications: Base Thread: 1/4-20 UNC (female) Top Thread: 3/8-16 UNC (male) Grip Style: Scalloped profile Tolerances: Thread profiles offset for FDM printability
OO Gauge Terraced House Kit with gable end not good
A terraced house facade for model railways, now complete with a separate matching gable end and textured roof panels. The brickwork and quoins evoke classic British railway architecture, designed to sit seamlessly beside track setups or diorama streetscapes. Additions Gable End: Completes the vertical facade, rising 20mm with continued mortar lines and coping stones. Roof Panels: Two separate 15mm-deep sections with an interlocking tile texture, ready to cement in place. Print Layout: All parts are arranged flat on the bed for straightforward printing without supports.
Waist-Level DSLR Viewfinder Hood
The glare off a DSLR screen in bright sunlight ruins focus pulling, and laying on the dirt to look at a fixed screen is worse. This builds a classic waist-level finder enclosure that mounts directly to the back of a Canon 650D. The mirror kicks the screen image up at 90 degrees, passing it through a top-mounted Fresnel lens, while four overlapping panels fold out to block the sun. Mechanical Details Clearance: 0.5mm on the hinge knuckles. Use a piece of 1.75mm raw filament as the hinge pin for all four folding panels. Optics: The 45° mirror tray accepts a 64x64x1.2mm flat mirror. The top frame holds a standard flexible Fresnel magnifier sheet. Both trays slide out for cleaning. Print Orientation: The parts are laid out flat in the STL. The main enclosure is rotated to print like a cup, entirely without supports. The LCD window bridge has an internal chamfer to ensure the overhang prints cleanly. Fitment: The internal dimensions match the 650D's 3:2 screen (68x46mm opening). Add a 1mm adhesive rubber gasket to the recesses on the camera face to prevent plastic-on-glass scratching.
Need a part that doesn't exist yet?
Start building →