3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
AeroSpan — Sliding Window AC Seal
Built for horizontal sliding windows, this adjustable dual-plate system fills the open sash gap without permanent modifications, making it ideal for rentals. It features a precise 130mm port for portable air conditioner hoses and includes a twist-lock bayonet cap to completely seal off drafts when the cooling unit is disconnected. Features Adjustable Span: The sliding track design expands the working width from 340mm up to 500mm to accommodate varying window openings. Rental Friendly: Clamps securely using standard hardware rather than relying on window pressure or requiring drilled fixtures. Twist-Lock Cap: A secure three-lug bayonet mechanism blanks off the 130mm port for times when the hose is removed. Assembly Notes The sliding extension requires four standard M6 bolts and nuts (not included in the printed file) to clamp the overlapping plates once the desired width is set.
Flush Spice Cap Labels
Spice jars with blank caps are infuriating in a low drawer—you have to lift every single one just to find the garlic. These flat tokens end the guessing game. They sit flush, they glue straight to the caps, and the text is embedded so your printer can run them in one pass with two colours. Print details Size: 40mm diameter to match standard caps. Profile: 1mm total thickness so they don't catch on the drawer frame above them. Colours: 0.6mm text depth, perfectly flush for a wipeable surface and clean slicer part-separation.
Mickey Lip Balm Keychain
A whimsical, two-piece threaded capsule designed to hold a standard tube of lip balm. The design features a screw-on top shaped like a familiar mouse character with a built-in keychain loop for easy carry. Remixing this model Bore size: The internal cavity is 17.5mm wide, perfect for standard chapstick. Expand this if your preferred brand uses a wider tube. Thread clearance: Printed threads are built with a 0.6mm clearance to turn smoothly right off the bed. Alignment: When screwed shut, the character's face might not perfectly align with the buttons due to thread timing. A light sanding on the lip of the base will let you dial in the exact stopping point.
Ultimate Tic-Tac-Toe Set
A complete 150mm Ultimate Tic-Tac-Toe board featuring 9 nested 3x3 grids. The main gameplay zones are separated by thick, raised dividers, while the smaller internal grids use thinner lines to keep the board easily readable during play. An outer rim prevents pieces from sliding off the edge. Board Size: 150 × 150 × 7 mm overall Play Pieces: Includes custom X and O tiles (11mm diameter, 2.5mm thick) sized perfectly for the inner grid cells. Tolerances: The sub-grid cells are 12.5mm wide, leaving a comfortable 1.5mm clearance for the tiles. Printing: All parts are oriented flat for printing without supports. The board, X tile, and O tile are provided as distinct, selectable parts so you can easily assign different colors or duplicate the tiles in your slicer.
nested tictacto
nested tictacto
Cherry MX 6-Way Cube
Six-sided fidget clicker block for standard mechanical keyboard switches. The bores are standard 14.2mm squares with exactly 1.5mm of plate thickness behind them, allowing the plastic retaining clips on the switches to snap firmly into place without glue. Fitment & Printing Notes: Compatibility: Fits Cherry MX, Gateron, Kailh, and most MX-style clones. Clearance: The internal cavity is 24mm across; switch stems and contact pins clear each other safely in the center without bottoming out. Printing: The top face prints over an internal void. You will want to run internal supports for that ceiling, or just be prepared to trim the bridging droop before seating the top switch.
8-Inch Wide Mouth Funnel
A large-capacity funnel designed with an 8-inch top diameter and a 2-inch bottom opening. Built with 3mm walls and a reinforced upper lip for rigidity during heavy use. 203.2 mm (8 in) top opening 50.8 mm (2 in) bottom spout 101.6 mm (4 in) cone depth 50.8 mm (2 in) spout length 3 mm wall thickness
bird bath shower head 5/16" 2
A friction-fit spray nozzle designed to convert a standard 5/16" ID water line into a wide, gentle shower for a bird bath or fountain. The part is modelled upside down (spray face flat on the Z-plane) so it prints cleanly as a single hollow body without any internal or external supports. Parameters to Play With If you take this into your own setup, here are the numbers driving the shape: The Stem Fit: Tapers from 8.5mm down to 7.2mm over a 20mm length. This is the sweet spot to wedge tightly into soft 5/16" (7.94mm) tubing without blowing out under mild pump pressure. The Spray Face: A 45mm outer diameter with a flat 2mm-thick face plate. The Holes: Uses a grid of 1.5mm holes spaced 3.5mm apart. Remix Hooks Flow Rate: If your pump is struggling to push water through, widen the internal 4.5mm bore or bump the face holes from 1.5mm up to 2.5mm. Directional Spray: Instead of a full grid of holes, mask off half the face to create a directional fan spray. Barbs: The smooth taper seals well for low pressure, but if you're running higher pressure, swapping the smooth cone for a stepped barbed profile will lock the tubing down harder.
Slant-Mount Storage Basket
This basket is designed to clip into a 72x45mm angled opening. The body includes a chamfered bottom corner that perfectly matches a 45-degree mounting plane, allowing the basket to sit level despite the angled interface. Angled Mount: Integrates seamlessly with 45-degree surfaces. Snap-fit Boss: Features flex slots that allow it to compress and securely click into place. Level Base: Maintains a flat interior and flat bottom resting point despite the angled mount.
5-Tier SNES Cartridge Display
A stepped, five-tier display stand designed to hold retro game cartridges upright. The staggered arrangement fans out the cartridges to keep front labels visible without stacking, providing a structured alternative to bulk box storage. Capacity: Five slots configured in a stepped vertical arrangement. Fitment: 20.5mm slot width accommodates standard SNES cartridges with operational clearance. Orientation: 10-degree rearward lean maximizes label readability. Structure: Relieved underside bridge minimizes material usage while maintaining base stability.
Cartoon Spooky Family Plaque
A classic cartoon-styled wall plaque celebrating the Halloween season, featuring a prominent mouse-ear silhouette and raised custom typography. A cast of familiar costumed characters stands along the base, surrounded by bats, jack-o'-lanterns, and starry skies. Designed for precise multi-material FDM printing: Separated Geometry: All distinct colors are built as independent, non-overlapping solids, ensuring crisp transitions when sliced. No Support Needed: The flat back and shallow 3D relief print perfectly flat on the build plate. Scaled for Production: Outermost bounds are dialed in slightly under 250 mm to fit seamlessly on a standard Bambu or similar modern print bed.
Wedding Anniversary Envelope Box
What it's for A two-piece, slip-fit gift box designed specifically for presenting a 15x11cm envelope. It features elegant inner and outer debossed frames on the lid, complemented by a custom wedding anniversary inscription and interlocking rings. Finger notches in the base make retrieving the envelope effortless. Dimensions Overall Outer Envelope: 164.6mm x 124.6mm Internal Cavity: 160mm x 120mm x 8mm Print Notes Both pieces print flat on the bed. No supports are required. The debossed text and rings on the lid are tailored to print cleanly face-up.
BTS Balm Capsule
A bright pink travel capsule sized for standard lip balm tubes, featuring the BTS door logo repeating across the exterior. The friction-fit cap includes a sturdy heart-shaped loop for attaching to a keychain or lanyard, keeping your balm secure and accessible on the go. Staggered logo pattern wrapping both the sleeve and cap Built-in push hole at the bottom to easily eject the tube Sized with a 16mm inner diameter to prevent rattling
Olympus — Modular Tall Planter
Olympus is a three-piece modular planter designed specifically for succulents, bonsai, and trailing vines that benefit from elevation without requiring a massive volume of soil. The fluted Greek column design prints cleanly in three support-free segments. The lower pedestal features a hollow core designed to be filled with sand or gravel for substantial bottom-weight, preventing the tall assembly from tipping. The upper capital locks onto the base and contains an internal water catch basin, while the dedicated nursery insert drops cleanly into the top with a full grid of drainage holes. Dimensions Total Assembled Height: 350 mm Maximum Diameter (Capital): 175 mm Nursery Insert Cavity: 149 mm diameter x 82 mm depth (approx. 1.4 liters) Print Notes Supports: None required. All overhangs and internal cavities are drafted for support-free bridging. Clearances: The slip joint and nursery drop-in feature 0.3mm and 1.0mm radial clearances respectively. Assembly: Print the three pieces separately. Fill the Base Pedestal with dry sand, then seat the Capital Planter on top (use CA glue on the slip joint for a permanent bond). Drop the populated Nursery Insert into the top.
Corner Guard — Tube Weight
The Corner Guard is a heavy, low-profile block designed to tame unruly pump outlet tubes. It tucks neatly into any wall corner against the baseboard, keeping 8.5mm tubing securely anchored and routing water exactly where it needs to go. Its heavily rounded top ensures that passing feet or sweeping brooms glance right off without dislodging the line. Features Corner Fit: Flat back and left sides sit flush against the wall and baseboard. Tube Clearance: A 9.5mm continuous bore provides a smooth slide for standard 8.5mm OD pump lines. Anti-Kink Exits: Both ends of the passage are flared to prevent the tubing from creasing under tension. Deflective Shell: 15mm rounding on all exposed faces deflects accidental strikes.
40mm Stud Mount Coat Hook
A robust coat hook designed for direct anchoring into a standard wooden wall stud. The angled peg provides substantial clearance for heavy fabrics, while the backplate keeps the mounting hardware strictly inline for reliable engagement with a single structural member. Fitment & Installation: Mounting Interface: Two countersunk mounting holes spaced exactly 40mm apart on the vertical axis. Fastener Compatibility: Sized to accept standard #8 wood or drywall screws. The countersink depth ensures the screw heads seat entirely flush beneath the surface, preventing snags on coat collars. Clearance: The lower hook geometry is offset to allow straight-line access for a standard driver bit during installation.
90° Bevel Gearbox Assembly
A fully functional 90-degree bevel gearbox connecting an 8mm hex shaft to a 5mm hex shaft. The robust L-shaped housing is split cleanly down the center for easy, support-free printing and simple assembly. Specifications Transmission: 1:1 ratio bevel gears (16 teeth, 90-degree mesh). Input/Output: Built-in 8mm and 5mm hex bores, oversized by 0.2mm to accommodate standard FDM tolerances. Mounting Interfaces: Four 4.3mm clearance holes on each face flange, arranged in a 25mm square pattern. Assembly: The housing halves are clamped together automatically when bolted to a surface using the face flanges; an extra M3 hole in the rear corner provides optional tightening. All pieces print flat without supports.
50mm Strap Castleman Stroller Tag
A two-tone stroller tag built to ride on a standard 50mm webbing strap or carabiner. The mounting slot clears most heavy-duty hook-and-loop closures without binding. Mounting Bore: 50x6mm Dimensions: 110x65mm Profile: Flat multi-level face for easy two-color filament swaps. Designed specifically for the Castleman family, carrying a classic '95' racing motif.
Mouse Wheel Spinner Rig
A motorized jig designed to continuously spin a computer mouse scroll wheel. Built around a NEMA 17 stepper motor and a standard GT2 280mm belt, it drives an overhead rod that rolls against the mouse. Adjustable Driven Shaft: The vertical towers feature 25mm of sliding travel to handle different mouse profiles. Bearing Housings: Included clamping blocks designed for standard 608RS bearings (with integrated crush ribs for a tight fit). Rod Adapters: Collar sleeves step the 8mm bearing inner diameter down to a 5mm rod. Motor Tensioning: The NEMA 17 faceplate has 10mm of slotted travel to easily tension the timing belt.
Nested Microwave Display
A delightfully absurd display piece featuring a classic microwave oven that has been swung open to reveal a second, fully-formed miniature microwave resting comfortably inside on the turntable space. Two-Tier Detailing: Both appliances feature their own dedicated screens, dials, and chunky button layouts. Solid Doors: The outer door is fixed in a swung-open position, while the inner microwave sits securely with its solid door shut. Proportions: The outer chassis measures 60x40x35mm, sized appropriately for desktop display.
MagSafe iPhone Desk Stand (fixed)
This MagSafe desk stand ends the daily annoyance of a phone lying flat on a desk catching glare and demanding two hands to peel away from a charging cord. It angles the screen at 60 degrees for casual checking, leaves plenty of airgap for the heavy camera bumps on modern iPhones, and traps the charging cable permanently in place so it stops sliding off the table. Tolerances and Fit Puck Recess: 56.5mm diameter by 5.7mm deep — dimensioned to grip a bare official Apple MagSafe charger securely. Cable Channel: A 7.5mm wide routed track runs straight down the front face of the arm and channels the cord cleanly under the heavy base plate. Ejection Hole: A 25mm rear bore gives your thumb space to push the charger out when you need to pack it for a trip.
Packout M18 Router Insert
What it's for A custom drop-in tray engineered to convert a half-section of a Standard Milwaukee Packout Organizer into a dedicated M18 router station. It features a contoured cradle for the router body with its battery attached, a wide pocket for the base plate, a large accessory bay for the edge guide and wrench, and a 12-slot storage grid for 1/4-inch shank router bits. Scalloped finger pulls make it easy to lift the router out. Dimensions Footprint: 280 mm × 200 mm Height: 60 mm Bit Storage: 12 holes, 7.2 mm diameter (for easy clearance of standard 1/4" shanks) Print notes Given the large 280 mm length, this will require a reasonably large print bed. A robust infill (15–20% gyroid) is recommended to support the weight of the tool. The design rests entirely flat on the build plate and requires no supports.
13mm Reflector P-Clip Mount
What it's for A single-piece P-clip mount designed to secure a front-facing reflector to a 13 mm bicycle handlebar. It clamps entirely using the reflector's own mounting screw and trapped nut, keeping the profile clean. Dimensions Bar clamp: 13.4 mm internal diameter (allows 0.4 mm clearance for a snug fit). Reflector socket: 10.4 mm diameter, 4.0 mm deep. Nut pocket: 8.5 mm hex, 3.5 mm deep, sized for a standard M4 nut. Screw clearance: 4.5 mm bore. Print notes For maximum strength and flexibility when snapping over the bar, lay the mount flat on its side (Y-face) in your slicer. Printing in PETG is recommended to allow the hinge arms to flex without snapping along layer lines.
MagSafe iPhone Desk Stand
This MagSafe desk stand ends the daily annoyance of a phone lying flat on a desk catching glare and demanding two hands to peel away from a charging cord. It angles the screen at 60 degrees for casual checking, leaves plenty of airgap for the heavy camera bumps on modern iPhones, and traps the charging cable permanently in place so it stops sliding off the table. Tolerances and Fit Puck Recess: 56.5mm diameter by 5.7mm deep — dimensioned to grip a bare official Apple MagSafe charger securely. Cable Channel: A 7.5mm wide routed track runs straight down the front face of the arm and channels the cord cleanly under the heavy base plate. Ejection Hole: A 25mm rear bore gives your thumb space to push the charger out when you need to pack it for a trip.
Need a part that doesn't exist yet?
Start building →