3D-printable workshop tools & shop upgrades
Drill guides, tool racks, sanding blocks, dust-collection adapters — functional shop gear with real dimensions, ready to print. Browse what makers built, or describe the exact tool you need and Printy makes it.
Need one that fits your exact measurements? Start building →
Newest
Threaded Irrigation Hose Adapter
What it's for A female-to-female adapter designed to link a stackable irrigation pipe to a standard garden hose. One side features a standard 3/4"-11.5 GHT garden hose thread, while the other side is threaded to screw directly onto the pipe's male fitting. Dimensions Overall length: 38 mm Hex body: 42 mm (circumscribed) for easy hand or wrench tightening Bore: 19 mm straight through to match the pipe's internal diameter and eliminate flow restriction Design notes The internal bore transitions smoothly into flat seats on both ends, allowing standard hose washers or O-rings to seal perfectly against the fitting. The thick hexagonal walls withstand outdoor water pressure without flexing.
FlowLink — Threaded Extension Pipe
A fully 3D-printable, 12-inch extension pipe designed for infinite stacking. The standard slip-fit ends have been replaced with integrated 3mm-pitch metric threads, allowing multiple segments to be screwed together securely without glue. Features Threaded joints: 21mm male thread with a matching 21.6mm female thread cut into the base, providing 0.6mm of clearance for smooth tightening right off the printer. Support-free design: The internal transitions use 45-degree tapers, meaning no internal supports are required. Slim profile: Maintains a 25mm outer diameter with a robust 3mm wall, tapering internally only where necessary to support the threaded sections. Print notes Print this standing upright. Given the tall, narrow footprint, a wide brim is absolutely mandatory to prevent bed adhesion failure when the printer reaches the top threads.
Extrusion Profile Crate Toolbox
A robust toolbox frame designed around the structural geometry of aluminum extrusions. Base Frame: Uses thick 4040 profile models to provide a heavy, stable foundation. Upper Structure: Uses standard 2020 profile models for the upright posts, crossbeams, and the central carrying handle. Storage Tub: A fully enclosed 3mm-walled bin that locks securely into the inner 6mm T-slots of the extrusions. Hardware: Includes low-profile foot pads and fitted end caps to blank off the raw extrusion cuts.
Impossible Sch40 PVC Coil
A literal translation of standard 2-inch Schedule 40 PVC pipe, coiled tightly to fit perfectly within a 6-inch round by 8-inch high volume. The bend radius on this is mathematically impossible for physical schedule 40 without buckling, but it prints exactly to spec. Dimensions Outer Diameter: 6 inches (152.4 mm) Height: 8 inches (203.2 mm) Pipe Specs: True 2" Sch 40 (2.375" OD, 2.067" ID) Coil Rotations: 2.75 turns to prevent pipe intersection
Gas Flow Regulator Replacement Knob
Heavy-duty replacement rotary control knob designed for gas regulators, torch bottles, and flow control valves. Features deep perimeter fluting to ensure positive grip even when operating with work gloves, a top recess with directional flow arc, and distinct raised minus and plus indicators. The underside features an 8 mm double-flat valve stem socket (6.5 mm across flats, 18 mm deep) with a transverse grub screw cross-bore for secure mechanical locking onto brass regulator shafts. Outer diameter: 46 mm Total height: 26 mm Grip: 12 scalloped finger flutes Stem bore: 8.2 mm with 6.5 mm double-D flats, 18 mm socket depth Set screw: M4 / 3.4 mm cross-bore for grub screw retention Markings: 270-degree indicator arc with raised +/- flow indicators
Milwaukee Packout Speaker Spacer
What it's for A custom fit speaker spacer designed specifically to adapt standard 6x9 automotive speakers into Milwaukee Packout toolboxes. The spacer features a wedge design to angle the audio directionally, a support grid pattern embedded on the underside for structural rigidity, and elongated mounting slots for flexible installation. Dimensions Length: 375 mm Width: 175 mm Height: Tapers from 10 mm at the rear to 26.5 mm at the front Cutout: Fits a standard 218 mm x 148 mm 6x9 speaker basket Remix ideas Swap the layout option to dual-mount or front-mount depending on the specific Packout box variant. Adjust the mounting slot spacing to align with non-standard speaker grilles.
Wall Mounted Multi Tape Dispenser
A wall-mounted multi-roll tape dispenser designed for workshops, packing stations, and craft benches. The bracket holds standard rolls of masking, painters, or packing tape on a central spindle and provides a rigid front tear bar with serrated teeth for clean one-handed pulls. What it's for Organising multiple rolls of workshop tape on a single wall-hung fixture so individual rolls can spin freely and be torn to length without chasing loose rolls around the bench. Dimensions Overall Width: 200 mm total width (180 mm usable tape span between arms) Wall Height: 90 mm backplate with 4x countersunk screw holes Wall Reach: 130 mm forward projection Spindle Diameter: 19 mm rod fitting standard 1" (25 mm) or 3" (76 mm) tape cores Print notes Print the main wall mount frame flat on its rear backplate or on one side face to eliminate tall support overhangs. The removable spindle prints horizontally with a small brim or vertically in two halves if your build height allows.

5-Piece Vented Offset Wand
A fully modular, five-piece fluid wand assembly designed with standard slip joints. It features a 16-inch total vented reach (split into two 8-inch sections), an S-bend offset made from two 90-degree elbows, and finishes with a 3-inch adapter barbed for standard 5/8-inch ID flexible tubing. Remix Hooks Clearances: The slip joints are set up with a baseline 0.4mm tolerance (mjointod = 11.9mm into fjointid = 12.3mm). If your printer runs wide, dial the male joints down a fraction. Barb Size: The barb tops out around 18.3mm to bite firmly into a 5/8" (15.875mm) inner-diameter soft tube. Tweak the d2 array loop if you need it more aggressive. Hole Spacing: Currently spaced at 12mm intervals along a single side, starting past the first slip joint. Easy to pattern out to a spiral or double row.
Loose Insurance Lettering
Custom loose lettering for Haley's Insurance, designed to fit cleanly inside a specific bounding area. Features of this model: Bold Typography: Uses Archivo Black for maximum readability and thickness. Defined Footprint: Text is sized and spaced to fit strictly within a 1.5 x 1 inch boundary with a 1/8 inch margin. Removable Frame: Includes a 1mm tall outer reference frame that can be deleted or skipped in the slicer. Full Height: Letters are extruded to a full 1/4 inch depth.
Knurled Tripod Thread Adapter
A threaded step adapter for mounting 3/8-16 photography and audio equipment to standard 1/4-20 tripod studs. The flanged base features a deeply scalloped outer diameter to allow firm, tool-free tightening. Specifications: Base Thread: 1/4-20 UNC (female) Top Thread: 3/8-16 UNC (male) Grip Style: Scalloped profile Tolerances: Thread profiles offset for FDM printability

Wall Mount Screwdriver Storage Rack
Loose screwdrivers rolling around on the workbench or buried in a drawer waste time every time a quick adjustment is needed. This wall-mounted screwdriver rack keeps six tools organized, visible, and instantly accessible right above the workspace. Designed with graduated hole sizes to accommodate everything from heavy stubby drivers down to precision tools, with front drop-in slots for smaller drivers. The back features integrated keyhole slots for clean, flush mounting onto shop walls or pegboards using standard pan-head screws. Specifications & Print Settings Overall Dimensions: 210 mm wide × 50 mm deep × 35 mm high Tool Hole Diameters: 11 mm, 10 mm, 9 mm, 8 mm, 7 mm, and 6 mm Mounting Interface: Dual keyhole slots spaced 140 mm apart (fits #8 / M4 pan-head screws) Orientation: Prints flat on its base without supports

63×88mm Magical Deck Tray
A compact, single-piece card tray built around standard 63×88mm card stock and their protective sleeves. The front block holds five cards fanned out at a backward angle, letting you read a full hand while leaving them hands-free. A fused deck pocket directly behind it keeps the draw stack squared up. I’ve debossed a familiar three-circle mouse silhouette into the outer walls and dropped a wizard’s wand across the top rim. Fitment Deck pocket inside dimensions: 65×92mm — accommodating up to a standard 63×90mm sleeve with 1mm of clearance. Front slot: Single continuous 160mm trench pitched back 15 degrees. Captures the bottom quarter of standard cards to stop them tipping out. Print specs: Solid unibody design. All cutouts and debossing are kept shallow (1.5–2mm) so they print cleanly on an FDM bed with zero supports required.
Magnetic Hummingbird Game Token
What it's for A 42mm tall, multi-part hummingbird token designed for board game play. Features a smoothly contoured base to allow for a press-fit 18x3mm magnet (requiring a 2.7mm depth) underneath, letting it snap to magnetic game boards. Dimensions Overall Height: 42mm (base to beak) Base Diameter: 21mm (narrowest), 25mm (widest) Body Thickness: ~3.5mm Magnet Cavity: 18.4mm wide, 2.8mm deep Assembly The model is split into three printable regions: The swept flower base The main hummingbird body (wings and tail flared out for an easy grip) The pill-shaped eye (designed to be printed in black and snap-fit or glued into the head)
Aquaponic Burp Pump Valve 45
What it's for A custom inline burp pump valve designed for aquaponic systems. It features a print-in-place marble that acts as a one-way check valve, allowing air to displace water out the 90-degree discharge elbow. Dimensions Main Body: 2-inch diameter by 4-inch length chamber. Discharge: 2-inch diameter extension turning 90 degrees. Air Intake: 1-inch diameter side port. Print notes The model is currently sliced open for visual inspection — it needs to be closed before printing. Prints vertically on its base to ensure the internal marble forms correctly without fusing to the seat. Normal supports are required for the protruding air intake and top elbow.

M3 Component Mounting Plate
A simple, precise mounting plate designed to bridge components or serve as a base layer. It features exact M3 clearance holes spaced for a specific 146.80mm x 45.80mm rectangular mounting pattern. Remix Hooks Plate footprint: Currently 152x51mm. Expanding this gives you room to add standoffs or cable routing cutouts. Hole spacing: Set to 146.80 x 45.80mm, but easily adjusted to match different PCBs or hardware. Thickness: At 2mm it is rigid enough for light duty; bump to 3mm or 4mm if it's carrying a heavy load. Edge treatment: Features a minimal 0.5mm chamfer to avoid sharp printed corners.
Heavy-Duty C-Bracket
A straightforward C-shaped bracket or spacer profile, built flat for easy printing and structural strength. Perfect as a spacing jig, edge clamp base, or structural tie. Remix Hooks Thickness (10 mm): The defining parameter. Bump it to 12 mm or 15 mm if you need stiffness for heavier loads. Notch Depth (65 mm): Dictates how deep the bracket bites. Edge Treatment: Currently sharp for exact alignments, but easily chamfered if you'll be handling it frequently. Mounting: Ripe for adding countersunk bolt holes through the 25 mm tabs.

Simple 2-Inch Cylinder
A heavy-duty 2-inch diameter puck, built exactly 1 inch thick. It's a completely blank slate standing by for its real job, complete with 1 mm chamfers on the top and bottom edges so it prints cleanly without an elephant's foot. Remix Hooks Dimensions: 50.8 mm diameter, 25.4 mm height. Add a center hole: Subtract a cylinder to turn this into a heavy-duty spacer. Hollow it out: Shell the inside to use it as a custom project box or potting cup. Scale the Z-axis: Squash it down in your slicer to use it as a coaster or shim.
Two-Speed Constant Mesh Gearbox
A build-it-yourself, chunky two-speed constant-mesh transmission designed for clear mechanical demonstration. All gears and shafts are laid out flat for straightforward printing. Design Features Two-Speed Setup: Includes a 15-tooth and 25-tooth spur gear arrangement. Constant Mesh: The gears are always engaged. A sliding dog clutch (the purple slider) locks the freely spinning gears to the output shaft to change the ratio. Assembly: Parts drop onto the base frame's posts. The high gear goes on the top of the output shaft (pocket facing down), the low gear goes on the bottom (pocket facing up), and the slider sits in between them on the hex shaft.
Fence post spacer
A straightforward set of square alignment spacers built to be stacked or swapped easily. Instead of dropping flush where you can't reach them, each spacer features a T-shaped grip tab extending out the front. Base: 20.3mm × 20.3mm Heights: 5mm, 10mm, 20mm, and 50mm Grip: Smooth, fully-rounded T-profile that sits centered on the edge The grip is 4.5mm thick across the board, offset just enough on the thinnest 5mm spacer to clear the plate. If you need a bolt hole cored through the center or a slot to make them slide-on U-shims, those are easy cuts to add.
Expanded Metric Thread Gauge
A benchtop reference block for identifying standard metric coarse threads. Contains female threads from M3 to M14. Specifications Range: M3, M4, M5, M6, M8, M10, M12, M14 Style: Internal threads for checking bolts Tolerances: Threads are modeled with internal clearance to account for typical FDM printing expansion, allowing bolts to thread smoothly without post-processing tap runs.

8-Inch Wide Mouth Funnel
A large-capacity funnel designed with an 8-inch top diameter and a 2-inch bottom opening. Built with 3mm walls and a reinforced upper lip for rigidity during heavy use. 203.2 mm (8 in) top opening 50.8 mm (2 in) bottom spout 101.6 mm (4 in) cone depth 50.8 mm (2 in) spout length 3 mm wall thickness
90° Bevel Gearbox Assembly
A fully functional 90-degree bevel gearbox connecting an 8mm hex shaft to a 5mm hex shaft. The robust L-shaped housing is split cleanly down the center for easy, support-free printing and simple assembly. Specifications Transmission: 1:1 ratio bevel gears (16 teeth, 90-degree mesh). Input/Output: Built-in 8mm and 5mm hex bores, oversized by 0.2mm to accommodate standard FDM tolerances. Mounting Interfaces: Four 4.3mm clearance holes on each face flange, arranged in a 25mm square pattern. Assembly: The housing halves are clamped together automatically when bolted to a surface using the face flanges; an extra M3 hole in the rear corner provides optional tightening. All pieces print flat without supports.
Mouse Wheel Spinner Rig
A motorized jig designed to continuously spin a computer mouse scroll wheel. Built around a NEMA 17 stepper motor and a standard GT2 280mm belt, it drives an overhead rod that rolls against the mouse. Adjustable Driven Shaft: The vertical towers feature 25mm of sliding travel to handle different mouse profiles. Bearing Housings: Included clamping blocks designed for standard 608RS bearings (with integrated crush ribs for a tight fit). Rod Adapters: Collar sleeves step the 8mm bearing inner diameter down to a 5mm rod. Motor Tensioning: The NEMA 17 faceplate has 10mm of slotted travel to easily tension the timing belt.

Packout M18 Router Insert
What it's for A custom drop-in tray engineered to convert a half-section of a Standard Milwaukee Packout Organizer into a dedicated M18 router station. It features a contoured cradle for the router body with its battery attached, a wide pocket for the base plate, a large accessory bay for the edge guide and wrench, and a 12-slot storage grid for 1/4-inch shank router bits. Scalloped finger pulls make it easy to lift the router out. Dimensions Footprint: 280 mm × 200 mm Height: 60 mm Bit Storage: 12 holes, 7.2 mm diameter (for easy clearance of standard 1/4" shanks) Print notes Given the large 280 mm length, this will require a reasonably large print bed. A robust infill (15–20% gyroid) is recommended to support the weight of the tool. The design rests entirely flat on the build plate and requires no supports.
Need a part that doesn't exist yet?
Start building →