3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
32mm Desk Headphone Hook
Under-desk headphone hook with an integrated C-clamp, scaled specifically for a standard 32mm tabletop. Fitment Host: Fits flat desk edges up to 34mm thick. The jaw gap is fixed at 36mm to allow clearance. Adjustment: The included M10x1.5 thumbscrew threads through the bottom jaw, securing the clamp to panels as thin as 19mm. Orientation: Designed to be printed flat on its side. The internal threads print horizontally, which requires decent part cooling but yields the strongest layer orientation for the clamp arms.
60mm Functional Open Differential
A complete 60mm mechanical open differential and display stand. It separates the internal components—four spider gears on a central cross, two side gears, and a carrier housing—exactly as they sit in a full-scale axle. The carrier housing splits cleanly in half to accept the cross and side gears, bolting together to secure the assembly. Three hex-driven input and output axles press-fit into the gears, allowing you to turn the pinion by hand and watch the side gears rotate independently through the spider gear array. Assembly Notes Hardware: Requires four standard M3 screws to clamp the carrier halves together. The lower carrier is sized for self-tapping, while the top has clearance holes and countersinks. Gears: The bevel gears are toleranced for FDM with an 0.4mm nozzle. Press the three hex axles into the pinion and the two side gears. Stand: The entire assembled carrier and pinion assembly drops into the U-slots on the display stand. No glue required.
CoilFlex — USB-C Splint
Meet the CoilFlex — a USB-C strain relief boot that balances rigid stability for the connector head with a flexible, coiled tail for the cable. By applying a helical cut pattern to the tail section while preserving a solid spine at the base, it allows the cable to bend naturally without kinking, while the solid front block keeps the delicate connector joint perfectly immobile. Features Rigid Connector Housing: Perfectly sized to hold the 10mm head section motionless. Spiral Flex-Tail: Allows the cable section to bend under stress without pinching. Snap-In Top: A continuous top channel lets you easily press the cable into place. Tapered Transition: Smoothly steps down from the connector block to the coil.
47x42x50mm Robot Arm Base
A simple 5-sided enclosure acting as the first axis base for a robotic hand. The box provides a sturdy foundation with 2.5mm walls and a chamfered exterior. Outer Dimensions: 47mm (X) × 42mm (Y) × 50mm (Z) Wall Thickness: 2.5mm on all closed sides Configuration: Open on the top face for inserting motors or wiring Features: 1mm external chamfers for printability and handling comfort
45mm Diamond Leaf Napkin Ring
A dual-purpose cylindrical sleeve functioning as a napkin ring and tealight surround. The 5mm wall provides structural rigidity and blocks stray light, while a staggered array of diamond-shaped leaf cutouts allows for a crisp lattice pattern when illuminated from within. Sized to accommodate a standard rolled cloth napkin. Inner Diameter: 45mm Outer Diameter: 55mm Overall Height: 40mm Wall Thickness: 5mm Pattern Type: Staggered diamond lattice Use Case: Napkin holding or tealight illumination
220x90mm Max-Length Duct Offset
What it's for A duct adapter designed to offset a 220x90mm rectangular ventilation run, allowing it to hug the ceiling tightly or bypass an obstacle. Dimensions Inner profile: 220x90mm on both ends. Wall thickness: 2mm. Offset: 90mm lateral shift. Total height: 240mm (designed to max out a 250mm print volume for the smoothest possible airflow). Print notes Print vertically. The internal transition angles are kept under 30 degrees to minimize flow restriction and should print cleanly without internal supports.
Peripheral Golem Wizard
A desktop peripheral awakened for a tabletop campaign. This miniature re-imagines an ergonomic computer mouse as an upright spellcaster golem. The chassis stands vertically on its wrist rest, using the left and right click plates as heavy armor over the "face". A scroll wheel serves as the glowing focus eye, while a rigid USB cable acts as a wizard's staff. Tooling Notes Designed specifically for simple two-part injection molding. The entire back half is cast completely flat. All protruding elements (hat brim, staff) are anchored flush or drafted to eliminate undercuts on a front-to-back pull.
Simple 2-Inch Cylinder
A heavy-duty 2-inch diameter puck, built exactly 1 inch thick. It's a completely blank slate standing by for its real job, complete with 1 mm chamfers on the top and bottom edges so it prints cleanly without an elephant's foot. Remix Hooks Dimensions: 50.8 mm diameter, 25.4 mm height. Add a center hole: Subtract a cylinder to turn this into a heavy-duty spacer. Hollow it out: Shell the inside to use it as a custom project box or potting cup. Scale the Z-axis: Squash it down in your slicer to use it as a coaster or shim.
Oghom Steamer Cradle
A vertical cradle sized for the Oghom GH02/GH03 steamer, featuring a large side cutout to accommodate the handle. Internal diameter: 76mm Cup depth: 72mm Mounting: Flat backplate, ready for double-sided tape or your own custom mounting remixes.
6x4 Inch Photo Dovetail Frame
A 200x150mm freestanding frame cut specifically for standard 6x4 inch photographic prints. It eliminates standard metal retaining clips in favor of a full-width sliding dovetail backing plate, ensuring uniform pressure across the print surface. An integrated kickstand prints directly inside the rear plate, requiring no secondary assembly or hardware. Standard Match: Accepts standard 6x4 inch (152x101mm) photographic paper stock or index cards. Critical Measurement: The front aperture is exactly 150x100mm. Check the margins on the target photograph before installation; any detail outside that boundary is hidden by the 25mm solid bezel. Incompatibilities: Designed strictly for desktop use. Lacks mounting points for wall hangers or standard VESA brackets.
Two-Speed Constant Mesh Gearbox
A build-it-yourself, chunky two-speed constant-mesh transmission designed for clear mechanical demonstration. All gears and shafts are laid out flat for straightforward printing. Design Features Two-Speed Setup: Includes a 15-tooth and 25-tooth spur gear arrangement. Constant Mesh: The gears are always engaged. A sliding dog clutch (the purple slider) locks the freely spinning gears to the output shaft to change the ratio. Assembly: Parts drop onto the base frame's posts. The high gear goes on the top of the output shaft (pocket facing down), the low gear goes on the bottom (pocket facing up), and the slider sits in between them on the hex shaft.
NDS 541 Channel Drain Grate
What it's for A heavy-duty replacement channel drain grate cover designed to closely match the NDS 541 specification. It features an inverted U-channel geometry with outward-facing bottom seating flanges, making it ideal for dropping directly into standard trench drain rails. Dimensions Top Surface Width: 2.75 inches (69.85 mm) Total Height: 3.125 inches (79.375 mm) Overall Base Width: 3.5 inches (88.9 mm) Top Lip Thickness: 0.25 inches (6.35 mm) Segment Length: 200 mm Print notes Modeled solid to avoid manifold errors and guarantee clean slicing. Includes transverse internal load-bearing ribs to prevent the tall side walls from buckling under pressure or deflecting during the print. Print flat on its base. No supports required. Use PETG or ASA for outdoor UV and impact resistance.
10-Inch Kicker Subwoofer Spacer 4800 ribs
A precise 6mm-thick mounting spacer for a 10-inch Kicker subwoofer, designed to match the 47KBRW10 frame. Features Bolt Pattern: 8 holes starting at the 11:30 position and distributed uniformly clockwise around the 252mm BCD. Cable Routing: Four dedicated horizontal underside rib channels. Fitment: Engineered with accurate 1-inch offsets for structural routing to avoid pinching or sealing issues along specific axes.
Apache 4800 Kicker Sub Spacer
A custom 6mm spacer for mounting a Kicker 10-inch subwoofer frame inside an Apache 4800 hard case. Features specific underside relief channels on the top and bottom edges (holes 1-2 and 5-6) so the case lid ribs can slot directly underneath without interfering with the mounting face. The top surface remains perfectly flat to ensure a flush seal with the speaker basket. Pattern: Standard 8-hole (252mm BCD) Clearance: 3.2mm wide by 3mm deep horizontal channels on Z=0 Thickness: 6mm overall
heart hope
A custom heart pendant featuring a smooth, domed face and raised 'hope' lettering. Built with a flat back for easy printing or clasp mounting, and includes an integrated 3.5mm top loop for a necklace string or jump ring. Dimensions: 24mm wide, 2.5mm thick base (4mm total thickness with text). Fitment: 3.5mm hole supports standard jump rings or cord. Print Setup: Prints flat on its back without supports.
Modular Rack Mount System
A modular organizing system designed to bridge a 19-inch rack using standard M8 threaded rods. Drop-in slices let you swap and position devices without taking the rails apart. Upright Slots: Vertical compartments tailored for MacBooks, Mac Minis, and standard routers. Showcase Shelves: Tilted, open-front bays with a retaining ridge and central cable channel for displaying small hubs like a Raspberry Pi, Hue Bridge, or Homey. Drop-In Fit: Each module features open-bottom slots, dropping securely over the support rods without requiring complete disassembly.
MoogMatch — Vertical 6HP Pod
A 6HP Eurorack extension pod designed to match the 20-degree panel slope of the Moog Mother-32, but modified with straight vertical front and back walls to eliminate printing overhangs. Features Perfect Pitch: Maintains the exact 20° slope of the Moog tier system. Support-Free: Vertical exterior walls drop straight to the desk, meaning this prints flat in one go. Integrated Rails: Features 2.5mm continuous slots built right into the lip for standard M3 self-tapping screws.
110mm Hex-Mesh Planter Pot
A tapered cover pot designed for standard 12cm nursery planters. The base and walls feature a staggered hexagonal mesh that promotes extensive airflow and rapid drainage. Dimensions: 150mm outer top diameter, 140mm inner top, tapering to fit a 120mm base. Total height is 120mm. Printability: The wall hexagons are rotated so their corners point straight up, yielding sharp 60-degree overhangs that print perfectly without supports. Durability: Uniform 5mm walls provide rigidity even with the extensive mesh cutouts.
ZeroScoop — ePaper HAT Case
ZeroScoop — ePaper Edition expands the original protective shell to fully encapsulate the Raspberry Pi Zero 2 WH alongside a top-mounted Waveshare 2.13" ePaper HAT. It retains the signature oversized SD-card thumb notch while adding a precision bezel window for the display, keeping both boards safe inside a single rigid structure. Features HAT Headroom: Lifted ceiling provides internal clearance for the HAT PCB and components. Bezel Window: 50x25mm chamfered opening frames the e-Paper active area. Unchanged Base: The lower chassis still offers full access to HDMI, dual USB ports, and the camera ribbon cable. Hardware: Countersunk M2.5 screw channels keep the assembly clean and secure.
DropStop — Laptop Charger Holster
Keep hefty laptop charger bricks securely anchored and off the floor with the DropStop holster. Designed to prevent heavy chargers from swinging off the desk edge and yanking cables loose, this wall-mounted cradle features a wide-open front. This design exposes the brick's LED indicator and allows for smooth, one-handed removal when taking the laptop on the go. Features Open Faceplate: Provides maximum visibility for the charging LED and allows the brick to be slid out easily. Cable Catch: Integrated side rim slots are sized perfectly to loop and secure a 6mm cable, keeping it tidy and eliminating dangle. Secure Mounting: Three countersunk screw holes provide a rock-solid anchor to the wall or the side of a desk. Dimensions Engineered for a 70x70x30mm charger brick. The internal pocket measures 72x32mm, leaving a comfortable slip fit so the charger doesn't bind. Rim slots accommodate 6mm cables.
SnoozeCat — Lifelike Edition
A small, support-free sculpture of a sleeping cat, redesigned to capture realistic proportions and an organic, natural resting pose. Perfect for a desk or shelf. Features Organic Silhouette: Hull-blended body structure mimics a cat's natural shoulder-to-haunch curve. Print-in-Place: Flat base and tucked geometry require zero supports. Integrated Details: Eyes, nose, and tail are built into the primary form for a clean print.
Sloped Power Box Enclosure v2
A sloped-console enclosure for a custom battery power box. The case features a sloped front panel for mounting a DSN-VC288 volt/amp meter and a generic battery level indicator, positioning them at an ergonomic viewing angle. Outputs: Four 14 mm barrel jacks on the front panel. Inputs: One 14 mm barrel jack and a 17×12 mm power switch cutout on the rear. Internals: A segregated 70×60 mm battery compartment with retaining walls. Assembly: Four M3 corner bosses meant for heat-set inserts, securing a drop-on top plate.
200mm Hinged Enclosure Case
What it's for A heavy-duty mounting enclosure that now features an integrated hinge system and a reliable snap-fit latch, replacing the standard friction-fit lid. Designed to house circuit boards, sensors, or bulky wiring, with a secure close that remains easy to access for maintenance. Dimensions Overall footprint: 200 mm × 200 mm Internal depth: 50 mm (plus clearance inside the lid lip) Mounting: Four 5 mm screw holes spaced 30 mm in from the corners Hardware: The hinge uses a standard 3.5 mm pin channel (can be fitted with raw filament or a metal rod) Assembly Both pieces print flat on the build plate. Once printed, insert a piece of 1.75 mm filament, a stiff wire, or an M3 bolt through the hinge knuckles to secure the lid to the body. The latch requires no extra hardware—it operates via intentional plastic flex.
110mm Kayak Track Anchor Cleat
A heavy-duty 110mm zig-zag anchor cleat designed specifically for marine T-track systems. This assembly provides a secure tie-off point for 550 and 220 paracord, locked down with printed M8 hardware. Fitment Details Track Slot: The 8.5mm bottom alignment boss drops perfectly into standard 9mm (3/8") kayak track top slots without binding. Cleating: 5 staggered teeth with a tight base gap designed to wedge and hold tension on standard cordage. Hardware: Fully solid M8 threaded T-bolts (11.5mm x 22mm heads) paired with 25mm knurled hand nuts, spaced at 80mm to spin freely alongside the main cleat body. Customization: Features "Many Prints" and "JM" deeply engraved into the outer walls.
Need a part that doesn't exist yet?
Start building →