3D Model Gallery
Every one of these started as a sentence — real dimensions, real holes, print-ready STL. Remix any of them, or describe the part you need and Printy builds it. Start building →
Newest
Halloween Gravestone Trophy, Glue-Together Kit
A Halloween trophy gravestone that prints as separate pieces, because a single-colour solid block makes white lettering and a skull impossible. The black stone and pedestal print in black PLA. The skull, webs, bats, cross and lettering print in white PLA and plug into sockets in the stone, so nothing relies on glue alone for position. Numbers that decide fit Assembled size: about 160 mm tall, 90 mm wide, 35 mm deep (pedestal 90 × 35 × 22 mm; stone 80 × 18 mm, arch radius 40 mm). Stone-to-pedestal joint: two rectangular tenons, 8 × 10 mm and 12 mm long, at offset positions so the stone only goes in one way. Pedestal holes are 8.5 × 10.5 mm and 14 mm deep, leaving 2 mm of glue space. Small parts: 2.8 mm pegs, 4 mm long, with chamfered tips. Sockets are 3.1 mm wide and 5 mm deep. Lettering: three word plates (BEST VILLAIN, HALLOWEEN NIGHT, WROCŁAW • 24.10.2026). Each has a 1.2 mm backing plate that sits in a recess, letters raised 1.8 mm and two pegs. Surface: chipped edges and cracks are modelled into the stone. Printing Stone: print it back-down, flat. Pedestal: print it upside-down or bottom-down. No supports are needed for either. White parts: print the lettering face-down, with the pegs pointing up. Print the skull, webs, bats and cross back-down. The model includes an assembled view and an exploded view. Each white part sits on its own socket pattern. Assembly: fit the tenons into the pedestal, glue them, then press each white piece into its sockets and glue.
Smart Tap Layout
An internal component layout for a smart tap, featuring a universal adaptor, dual O-rings, an IR sensor, and a segmented electronics board with off-board relay. Base Enclosure: Open-top shell ready for component mounting. Electronics: Main PCB holding the control unit and SPET driver, with a low-profile off-board relay. Plumbing: Universal adaptor with dual sealing rings.
BYTEBOX Logo-Platte 114,5 x 105,3 mm
Schwarze Rechteckplatte mit erhabenem, gelbem BYTEBOX-Logo (Würfel und Pixelschriftzug) für den zweifarbigen FDM-Druck. Das Logo liegt vollständig innerhalb der Plattenfläche und ist mittig ausgerichtet. Platte: 114,5 × 105,3 × 1,5 mm, flache Unterseite Logo: 0,8 mm erhaben, Gesamthöhe 2,3 mm Logobreite: ca. 95 mm, ca. 9 mm Rand links und rechts Zwei getrennte Körper: Grundplatte und Logo Schrift: eckige Pixelschrift (Press Start 2P)
Matilda sign 2
What it's for A door sign reading "Matilda's room" in raised script lettering on a flat plate with a screw hole at each end. Dimensions Plate: 160 × 66 × 4 mm, rounded corners Lettering: raised 2.5 mm, Satisfy font, two lines Two 5 mm screw holes near the ends Remix ideas Swap "room" for another word Change the font or colours Add a hanging hole at the top instead of side screws
Happy 40 Birthday Cake Topper
A solid, 3D-printable birthday cake topper reading "HAPPY 40". Designed for clear legibility from across a room, the text uses a heavy Archivo Black font extruded to a sturdy 4mm thickness. The letters are anchored to a continuous horizontal bridge, ensuring the entire piece remains rigid and prints as a single continuous body. A central, tapered 85mm stake extends from the base for secure insertion into a cake. Prints flat as a single solid piece 25mm tall text for high visibility 4mm overall thickness provides structural rigidity 85mm central tapered mounting stake
Dollhouse Slide Flume
Standard toy slides are straight ramps that launch figures directly into the floor. This provides a controlled descending flume with a banked S-curve approach, catching the speed before the drop ends. Fit & Print Specifications Interior Flume: 68 mm wide, accommodating standard 1:6 and 1:12 scale articulated figures. Sidewalls: 14 mm retaining walls above the floor, filleted internally at an 8 mm radius to prevent snags. Clearance: Reaches 260 mm outward and drops 450 mm vertically. Integration: Raw cut ends ready for friction mounts, threaded brackets, or platform adhesives.
Welcome — Cursive Neon Strip Holder
Welcome is a script-lettered sign form with an open channel running through every letter, built for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the flowing lettering glows like a custom neon sign. Features Heavy brush-style "Welcome" lettering 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Wire exit holes through the floor at the ends of the word Print notes Prints flat with no supports Strip width varies by brand, so check the channel width against your strip first
Welcome — Cursive Neon Strip Holder
Welcome is a script-lettered sign form with an open channel running through every letter, built for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the flowing lettering glows like a custom neon sign. Features Heavy brush-style "Welcome" lettering 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Wire exit holes through the floor at the ends of the word Print notes Prints flat with no supports Strip width varies by brand, so check the channel width against your strip first
Closed Helical Micro Spring
A miniature closed-end helical spring. Designed to rest squarely on flat surfaces, the outer coils taper into a zero-pitch ring to distribute force evenly across the ends. Overall height: 7 mm Outer diameter: 3.5 mm Wire thickness: 0.45 mm FDM Printing Note: Printing at this scale usually produces parts much stiffer than their injection-molded counterparts. Expect rigid behavior unless printed in highly compliant TPU.
Lemon Slice Earring Cover
A two-piece clamshell case designed to snap cleanly over a 29mm circular earring. Both halves print face-down and feature the decorative lemon slice pattern on their outer faces. What it's for Transforming a plain hoop or disc earring into a 3D fruit slice without permanent modification. The two halves securely press-fit together, sandwiching the jewelry inside while leaving a notch for the earring hardware to pass through normally. Dimensions Overall size: 36 mm diameter, 6.5 mm total thickness when assembled. Internal pocket: 29.5 mm diameter by 2.5 mm deep, tailored for a 2 mm thick earring. Hardware slot: 4 mm wide notch at the top edge. Assembly Prints as two separate pieces side-by-side, with the decorative faces flat on the bed. Features four alignment pegs that snap the halves together. The symmetrical layout ensures the hardware slots align perfectly when closed.
130mm Tubeless Repair Kit Case
A rigid three-piece storage case designed for tubeless tyre repair kits. The base features an inset lip that locks the lid in place, secured by a snap-fit C-clamp latch that mounts to an integrated front axle. Dimensions: 130 mm x 85 mm x 35 mm combined. Wall Thickness: 2.5 mm throughout. Clearances: 0.3 mm on the lid slip-fit, 0.5 mm width clearance for the latch. Print Orientation: All three pieces are laid flat on the bed. No supports required.
Faceted 80mm LED Tealight Lantern
A faceted 80mm cube lantern designed to slip over a standard LED tea light. The outer shell features a repeating triangular lattice that casts geometric light patterns on surrounding surfaces, providing mood lighting without an open flame. Dimensions: 80 x 80 x 80 mm overall footprint with heavy chamfered edges. Fitment: Features a 39.5 mm bottom recess to comfortably clear standard 38 mm LED tea lights. Printability: All triangular apertures are oriented apex-up to act as self-supporting overhangs, requiring zero support material during printing. Safety: Designed exclusively for use with battery-operated LED units; not suitable for real flames.
X26 Prop Holster, 2.21 in Belt, Strap
A prop X26 holster pouch with a belt loop and a separate U-shaped retention strap, sized for a duty belt 2.21 in (56 mm) tall and 0.21 in (5.3 mm) thick. Fit notes Belt slot: 60 mm tall, 7.5 mm thick. It will not fit belts wider than about 58 mm. Pocket: tapers from 70 × 44 mm at the base to 84 × 48 mm at the mouth, 130 mm deep. These are estimated prop dimensions, not measured. Check your prop before printing. Strap: a separate U-shaped piece with keyholes that mate with the two 5 mm studs on the rim. It prints flat and is not attached to the pouch. Not a working Taser holster. Prop use only.
Realtor Anniversary Commemorative Plaque
A custom decorative plaque commemorating a tenth work anniversary for a realtor. The layout features personalized congratulatory text, a decorative scroll motif, and a detailed house icon to mark the occasion. Key details: Solid rectangular base with rounded corners Raised outer border for framing the text Centered typographic layout spanning multiple fonts Stylized house icon and decorative center scroll
Visitor Pass Base Frame
A solid, minimal frame designed to house a standard 3D-printed visitor pass insert. The base acts as a rigid backing plate, featuring a recessed cavity with a slight continuous inner overhang. This tapered lip allows a flat insert to snap securely into place while printing entirely without supports. Overall Dimensions: 120 mm × 75 mm. Thickness: 2 mm solid floor with a 1.8 mm raised border (3.8 mm total height). Recess Size: 110 mm × 65 mm, providing roughly 0.2 mm clearance around a 109.6 mm × 64.6 mm insert. Retention: 0.2 mm continuous 45-degree internal chamfer at the top edge to lock the insert in place. Printability: Prints perfectly flat on the bed; no supports required.
Freelance Class 37 inspired Lego style loco cab
Brute is a hollow, LEGO-compatible cab modelled loosely on the British Class 37 locomotive. It is six studs wide and four deep, with a closed floor that carries a grid of sockets so it presses onto a standard baseplate. Two studs on the nose give a place to clip on headlight pieces. Features Raked twin windscreens and side door windows Flat, smooth roof at five-brick height Two studs on the front face for headlights Lamp recess centred between the headlight studs 6×4 socket grid under the floor Dimensions Width: 47.8 mm Depth: 31.8 mm Height: 48 mm to the roof Headlight studs: 4.8 mm diameter, 8 mm either side of centre Print notes Print upright on the floor plate, or flipped onto the roof for a clean top surface. Hollow underneath and open at the rear.
Freelance Class 37 inspired Lego style loco cab
Brute is a hollow, LEGO-compatible cab modelled loosely on the British Class 37 locomotive. It is six studs wide and four deep, with a closed floor that carries a grid of sockets so it presses onto a standard baseplate. Two studs on the nose give a place to clip on headlight pieces. Features Raked twin windscreens and side door windows Flat, smooth roof at five-brick height Two studs on the front face for headlights Lamp recess centred between the headlight studs 6×4 socket grid under the floor Dimensions Width: 47.8 mm Depth: 31.8 mm Height: 48 mm to the roof Headlight studs: 4.8 mm diameter, 8 mm either side of centre Print notes Print upright on the floor plate, or flipped onto the roof for a clean top surface. Hollow underneath and open at the rear.
Basic Geometric Ziggurat
What it's for A 6th-grade style Mesopotamian ziggurat model made from bold, basic geometric shapes. The structure relies on simple stacked cubes for the main tiers, a chunky 6-step staircase to represent a grand ramp, and a classic triangular roof capping the top shrine. Dimensions Base Tier: 100 × 100 mm Total Height: 85 mm (including the new roof) Staircase: 6 large blocks, extending 60 mm outward from the center. Print notes This model is built flat to the plate and requires zero supports. The large geometric shapes make it a very fast, reliable print in any standard filament.
Historical Ziggurat Model
An architectural scale model echoing the layout of the Great Ziggurat of Ur. It features a rectangular tiered base, the historically authentic triple-converging staircase assembly, and a midway gatehouse leading up to the final summit shrine. Remix Variables The layout is driven by clear step-and-tier geometry designed for easy modification: Tier Arrays: Arrays defining [width, length, height] for each level (140x100x24 for the base) let you scale the footprint or add levels effortlessly. Stair Stepping: The step loops scale their rise and run to exactly match the tier heights, making it trivial to change the vertical scale of the structure without breaking the stair logic. Taper Control: A single global inset drives the draft angle of the walls across all tiers.
Klipper Telemetry Console
A compact enclosure for Klipper printer telemetry, mounting to standard 2040 extrusion. This version features revised back cover mounts that embed securely into the enclosure walls, ensuring robust assembly. Revised Mounts: Structural corner blocks anchor the back plate safely to the frame. Component Fits: Room for a 1602A LCD and 32x32mm MAX7219 matrix. Mounting: Flush side flange with M4 t-nut clearance.
Klipper Display and Status Console
Compact left-side mounting enclosure for Klipper printer telemetry, designed specifically for the Ender 3 Pro 2040 vertical extrusion. Hardware Compatibility: Fits a 1602A I2C LCD, a 32x32mm HW-109 MAX7219 LED Matrix, and a standard 5mm RGB LED. Internal Clearance: 36mm cavity depth cleanly clears standard I2C backpacks. Mounting System: Left-oriented 5mm side flange using dual slots for M4 t-nuts. Flange sits flush to the bottom, leaving top clearance for gantry travel. Assembly: Snap-fit 2mm front panel with internal screw bosses; back plate secured via four M3 interior corners. The housing prioritises rigidity and short wiring paths over bulk, anchoring firmly without compromising structural frame limits.
Flat pack Lego style cab based loosely on the BR Type 47 diesel
Brute is a hollow, LEGO-compatible cab modelled loosely on the British Class 47 locomotive. It is six studs wide and four deep, with a closed floor that carries a grid of sockets so it presses onto a standard baseplate. Two studs on the nose give a place to clip on headlight pieces. Features Raked twin windscreens and side door windows Flat, smooth roof at five-brick height Two studs on the front face for headlights Lamp recess centred between the headlight studs 6×4 socket grid under the floor Dimensions Width: 47.8 mm Depth: 31.8 mm Height: 48 mm to the roof Headlight studs: 4.8 mm diameter, 8 mm either side of centre Print notes Print upright on the floor plate, or flipped onto the roof for a clean top surface. Hollow underneath and open at the rear.
Swivel Tooth Stash Box
A fluted cylinder stash box featuring a swing-open lid and a custom dental logo on top. The lid snaps securely into place with a concealed locking pin, making it perfect for holding small desktop items. Swivel Action: Swings smoothly and clicks closed via a small detent on the rim. Fluted Base: Deep vertical cuts around the cylinder provide plenty of grip. Raised Engraving: A custom tooth outline frames "United Smiles Dentistry" cleanly on the lid.
1:37 Tiger I 8.8 cm KwK 36 Barrel
A static 1:37 scale 8.8 cm KwK 36 L/56 gun barrel for the Tiger I, with a muzzle brake and a rear mounting stub. Fitment Scale: 1:37. The tube is 133.2 mm long (4,930 mm full size) and does not include the muzzle brake. Bore: 2.38 mm (88 mm full size). It is modelled as a recess in the brake end, not a through bore. Rear stub: stubd is 6 mm and stubl is 6 mm. These are placeholder values. Measure the mantlet hole on your own kit and set both before printing. Does not fit: any kit with a different mantlet bore. It also does not fit other 88 mm guns such as the KwK 43 or the Flak 36. Details Tapered tube profile, from a thick breech end down to a slim muzzle end. Three reinforcing rings along the tube. Double-baffle muzzle brake with side slots, fused to the tube. Check before printing The mantlet bore diameter. Print the barrel standing upright or lying flat, depending on your printer and the fine detail you want to keep. The brake slots are the finest features.
Need a part that doesn't exist yet?
Start building →